
_____________________________________________________________________________________________
The supplier identified below generated this SDS using the UL SDS template. UL did not test, certify, or approve the substance described in this SDS, and
all information in this SDS was provided by the supplier or was reproduced from publically available regulatory data sources. UL makes no representations
or warranties regarding the completeness or accuracy of the information in this SDS and disclaims all liability in connection with the use of this information or
the substance described in this SDS. The layout, appearance and format of this SDS is © 2014 UL LLC. All rights reserved.
_____________________________________________________________________________________________
_____________________________________________________________________________________________
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
Endust for Electronics Pop-up Wipes
Other means of identification
Recommended use of the chemical and restrictions on use
Wipes, Cleaning (with Chemical)
Details of the supplier of the safety data sheet
3938 Broadway St
Buffalo
NY
14227
US
Contact Phone 716-706-1160
Emergency telephone number
800-255-3924
International +01-813-248-0585
Company Emergency Phone
Number
2. HAZARDS IDENTIFICATION
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
GHS Label elements, including precautionary statements
Hazard Statements
May cause an allergic skin reaction
Odor Practically odorless
Precautionary Statements - Prevention
Avoid breathing dust/fume/gas/mist/vapors/spray
Contaminated work clothing should not be allowed out of the workplace
Wear protective gloves
Precautionary Statements - Response
Specific treatment (see supplemental first aid instructions on this label)
Skin
IF ON SKIN: Wash with plenty of soap and water
If skin irritation or rash occurs: Get medical advice/attention
Wash contaminated clothing before reuse
Precautionary Statements - Storage
None
Precautionary Statements - Disposal
Dispose of contents/container to an approved waste disposal plant
Hazards not otherwise classified (HNOC)
Unknown Toxicity
0% of the mixture consists of ingredient(s) of unknown toxicity
May cause slight eye irritation
Repeated or prolonged skin contact may cause allergic reactions with susceptible persons
Interactions with Other Chemicals
No information available.

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
3. COMPOSITION/INFORMATION ON INGREDIENTS
Third Party Formulation (TP # 1201971)
First aid measures
General Advice
Show this safety data sheet to the doctor in attendance.
Rinse thoroughly with plenty of water, also under the eyelids. If symptoms persist,
call a physician.
Wash with soap and water. May cause an allergic skin reaction. In the case of skin
irritation or allergic reactions see a physician.
Rinse mouth immediately and drink plenty of water. Never give anything by mouth
to an unconscious person.
Most important symptoms and effects, both acute and delayed
Most Important Symptoms and
Effects
Indication of any immediate medical attention and special treatment needed
Notes to Physician
May cause sensitization of susceptible persons. Treat symptomatically.

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing media
CAUTION: Use of water spray when fighting fire may be inefficient.
Specific Hazards Arising from the Chemical
Product is or contains a sensitizer. May cause sensitization by skin contact.
Hazardous Combustion Products
Carbon oxides.
Physical/Chemical Reaction
Properties
Sensitivity to Mechanical Impact
Sensitivity to Static Discharge
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective
gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Environmental Precautions
Environmental Precautions
Refer to protective measures listed in Sections 7 and 8.
Methods and material for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material. Pick up and transfer to properly labeled containers.

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
eyes.
Conditions for safe storage, including any incompatibilities
Storage
Keep container tightly closed.
None known based on information supplied.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region specific regulatory bodies
Appropriate engineering controls
Showers
Eyewash stations
Ventilation systems
Individual protection measures, such as personal protective equipment
Eye/Face Protection
Wear safety glasses with side shields (or goggles).
Wear protective gloves and protective clothing.
No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
Handle in accordance with good industrial hygiene and safety practice. Take off
contaminated clothing and wash before reuse.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical and Chemical Properties
Physical State
Boiling point / boiling range

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Flammability (solid, gas)
Flammability Limit in Air
Solubility in other solvents
Partition coefficient: n-octanol/water
Decomposition temperature
Other Information
Softening Point
Particle Size Distribution
10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Possibility of Hazardous Reactions
None under normal processing.
Hazardous Polymerization
Hazardous polymerization does not occur.
Conditions to avoid
None known based on information supplied.
Incompatible materials
None known based on information supplied.
Hazardous Decomposition Products
Carbon oxides.
11. TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
Product Information

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Specific test data for the substance or mixture is not available.
Specific test data for the substance or mixture is not available.
Specific test data for the substance or mixture is not available.
Specific test data for the substance or mixture is not available.
Third Party Formulation (TP #
1201971)
Information on toxicological effects
Symptoms
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Sensitization
May cause sensitization of susceptible persons. May cause sensitization by skin contact.
No information available.
The table below indicates whether each agency has listed any ingredient as a carcinogen.
No information available.
No information available.
No information available.
No known effect based on information supplied. Carcinogenic potential is unknown.
No information available.
Numerical measures of toxicity Product Information
The following values are calculated based on chapter 3.1 of the GHS document
Not applicable

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
12. ECOLOGICAL INFORMATION
The environmental impact of this product has not been fully investigated.
Toxicity to Microorganisms
Daphnia Magna (Water
Flea)
Third Party Formulation (TP #
1201971)
72h EC50: 0.11 - 0.16 mg/L
(Pseudokirchneriella
subcapitata) 96h EC50:
0.03 - 0.13 mg/L
(Pseudokirchneriella
subcapitata) 120h EC50: =
0.31 mg/L (Anabaena
flos-aquae)
96h LC50: = 1.6 mg/L
(Oncorhynchus mykiss)
48h EC50: = 4.71 mg/L 48h
EC50: 0.12 - 0.3 mg/L 48h
EC50: 0.71 - 0.99 mg/L
Persistence and Degradability
No information available.
Third Party Formulation (TP # 1201971)
Other adverse effects
No information available.
13. DISPOSAL CONSIDERATIONS
This material, as supplied, is not a hazardous waste according to Federal regulations (40
CFR 261). This material could become a hazardous waste if it is mixed with or otherwise
comes in contact with a hazardous waste, if chemical additions are made to this material, or if
the material is processed or otherwise altered. Consult 40 CFR 261 to determine whether the
altered material is a hazardous waste. Consult the appropriate state, regional, or local
regulations for additional requirements.
Dispose of contents/containers in accordance with local regulations.
California Hazardous Waste Codes
14. TRANSPORT INFORMATION

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
15. REGULATORY INFORMATION
International Inventories
All components are listed either on the DSL or NDSL.
TSCA - United States Toxic Substances Control Act Section 8(b) Inventory
DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or
chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372
SARA 311/312 Hazard Categories
Sudden release of pressure hazard
CWA (Clean Water Act)
This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR
122.42)
CERCLA
This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pertaining to releases of this material
California Proposition 65
This product does not contain any Proposition 65 chemicals.
U.S. State Right-to-Know Regulations

1038001 - Endust for Electronics LCD & Plasma Pop-up Wipes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
International Regulations
WHMIS Hazard Class
D2B - Toxic materials
Physical and
Chemical Hazards -
Product Stewardship
23 British American Blvd.
Latham, NY 12110
1-800-572-6501
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any
other materials or in any process, unless specified in the text