Endura NCC0325 User Manual

Model: NCC0325

FOR RECHARGEABLE LMR BATTERIES

Single Unit Rapid Charger

1

Introduction

Thank you for purchasing an ENDURA™ NCC0325, Single Unit Rapid Charger.
This high quality product is designed for use with rechargeable LMR batteries.
With the appropriate charging pod installed, it can charge batteries with:

Lithium ion (Li-Ion), nickel metal hydride (NiMH), or nickel cadmium
(NiCd) chemistry.

Important

Read all Caution statements below and this User Manual before attempt­ing to charge a battery.

Check to make sure a charging pod compatible with your battery is prop­erly installed on charger before placing battery in pod.

Position charger away from TVs, radios, or other receivers to prevent the
charger from interfering with these types of products.

Always charge new batteries completely before initial use. Recycle bat­teries when they can no longer be used. Do not discard unwanted batter­ies in the trash or incinerate. Batteries exposed to fire or excessive heat
may explode.

For best battery performance, charge NiCd and NiMH batteries when they
are fully discharged.

1.

2.

3.

4.

5.

2

Caution

Never charge alkaline or dry cell batteries with this charger. They may
burst and cause damage or personal injury.

Do not charge Li-Ion, NiMH, or NiCd batteries unless they are designed
with overcharge protection.

Use charger indoors only. Do not expose the charger to rain, any liquids,
or excessive moisture.

Do not attempt to charge a battery without first installing the appropriate
charging pod. Use only charging pods designed for the ENDURA™ NCC0325
charger. Disconnect charger from power supply before installing, adjust­ing, or removing the charging pod.

Make sure contacts in charging pod and battery are clean. Do not allow
wire or metal objects to touch contacts in charging pod or any internal
part of the charger.

Do not remove the charger’s housing or make any modification to the charger.
Use only the power supply provided with the ENDURA™ NCC0325 charger. If

a replacement power supply is required, order part number NCC0325. Use
of other power supplies may damage the charger or batteries you may be
attempting to charge.

ENDURA™ NCC0325 Features

Power Supply
Endura™ NCC0325 Single Unit

Rapid Charger
Removable Charging Pod
Charge Status LED

1.

2.

3.

4.

5.

6.

7.

1.

2.

3.

4.

Note: Quick reference informa-

tion for charge status is

located on bottom of charger.

1

2

3

4