Endura GREASE MANAGEMENT User Manual

Eective Date: June 1, 2018

GREASE MANAGEMENT

Engineering grease

management solutions

for plumbing and

ENDURA SECTION 22 13 23 GREASE INTERCEPTORS

food service professionals

[e-mail]

About Us

Molding a Better Future

We are one of North America’s leading producers of plastic
products for the building and construction industries
specializing in injection molded products. We have ve
decades of expertise and experience in the manufacturing
and distribution of plastic plumbing products, processing
multiple materials and producing millions of ttings and
products on an annual basis.

Endura® grease management products have demonstrated
eective, ecient and consistent performance with over a
decade of eld installation and operation. The Endura®
products are multi-patented and built to withstand the
toughest environments, providing the exibility of in-oor,
on-oor and semi-recessed application. We have been
instrumental in changing the traditional practices regarding
the installation of grease management solutions, plastic
alternatives to metal interceptors being now substantially
accepted Nationwide as the new standard for grease
management in commercial foodservice applications.

Endura® Earth friendly solutions
for Grease Management

We are committed to the continuous improvement
of our environmental performance and to meeting
or exceeding the requirements of all applicable
environmental laws and regulations.

Durability

• Fewer installations and replacements result in
lower lifetime costs & less landll waste

• Injection molded in engineered
thermoplastics, Endura® Grease Interceptors
will not corrode, chip, or peel, even under the
most severe applications

• Durability provides consistent operation – no
compromise of eectiveness due to
deterioration of key parts

Green by Design

• Light-weight but durable grease interceptor
units enable smaller carbon footprints and
low-emissions transport

• Injection and rotationally molded thermoplastic
requires less energy to produce than metal
grease interceptors

• Endura® interceptors are manufactured using up to
100% recompounded material

- 2 -

Product Overview

Hydromechanical Grease Interceptors (HGI)

Endura® 7 - 10 Models

3907A02 - 7GPM (0.44 LPS) 2” (51 mm) connection
3910A02 - 10GPM (0.63 LPS) 2” (51 mm) connection

Compact models use a development of the patented Endura bae system to enhance
separation performance at low ow rates. EZ-Clean tank design – Aids exterior cleaning.

Endura® 15 - 20 Models

3915A02 - 15GPM (0.94 LPS) 2” (51 mm) connection
3920A02 20GPM (1.26 LPS) 2” (51 mm) connection

Our original tank, 15 and 20gpm units are perhaps the most commonly
installed product. It suits both on-oor and in-oor applications.

Endura® 25 Lo-PRO Model

3925A02LO 25GPM (1.6 LPS) 2” (51 mm) connection

Endura® Lo-PRO is for tight on-oor applications where space is at a premium.
Same dimensional footprint as 35gpm and 50gpm Endura® models.
Overall height 11 inches, still meeting requirements of ASME112.14.3.
Internal components can be removed in less than 5” of additional clearance.

Endura® 25 XT Models

3925XTA02 25GPM (1.6 LPS) 2” (51 mm) connection
3925XTA03 25GPM (1.6 LPS) 3” (76 mm) connection

25gpm uses structured foam molding technology providing rigidity and durability
while reducing unit weight. Models incorporate cover pry points and latch recesses
for no-tool access.

Endura® 35 Models

3935A03 35GPM (2.2 LPS) 3” (76 mm) connection

3935A04 35GPM (2.2 LPS) 4” (110 mm) connection

35gpm is constructed of thermoplastics providing rigidity and durability while
reducing unit weight. Diuser bae aids separation at increased ow rates.

Endura® 50 Models

3950A03 50GPM (3.2 LPS) 3” (76 mm) connection
3950A04 50GPM (3.2 LPS) 4” (110 mm) connection

A tall version of our 35gpm model the 50gpm interceptor uses common
parts incorporating all the best features of the Endura® product design in
a comparatively light weight solution to that of its metal competitors.

High Capacity Hydromechanical
Grease Interceptors (HGI)

Endura®XL 75 Models

4075A04 75 GPM (4.74 L/Sec) 4”(110 mm) Connections
4075A04T 75 GPM (4.74 L/Sec) 4”(110 mm) FPT Connections

Industry leading separation eciency based on testing to national standards.
Comparable operational grease capacity (580 lb) to 750 gallon Gravity GI (Concrete).*
Operation is based on Dynamic Inlet Bae (Pat. Pend.) with internal ow control device.
Smart tank design oers many features, with external ow control available as an option.
Cut-to-length riser system for burial up to 72”, pre-plumbed outlet system, trac rated
dual cover format for unrivalled maintenance accessibility & inspection.

Endura®XL 100 Models

40100A04 – 100GPM (6.3 L/Sec) 4”(110 mm) Connections
40100A04T - 100GPM (6.3 L/Sec) 4”(110 mm) FPT Connections

Industry leading separation eciency based on testing to national standards.
Comparable operational grease capacity (1058 lb) to 1000 gallon Gravity GI (Concrete).*
Operation is based on Dynamic Inlet Bae (Pat. Pend.) with internal ow control
device. Smart tank design oers many features, with external ow control
available as an option. Cut-to-length riser system for burial up to 72”,
pre-plumbed outlet system, trac rated dual cover format for unrivalled
maintenance accessibility & inspection.
* based on 25% rule for maintenance

Grease Interceptors – Generic Types

The grease management industry has developed signicantly in the past decade
with not only more advanced and improved products but also development of
performance standards and harmonization of common terms and references.

Traditionally the term “Grease Trap” was commonly applied and is still
used in the industry today. This term is progressively disappearing
from nomenclature and technical references based on an industry wide
recognition that the term “trap” would suggest the presence of a water seal,
integrally located within the interceptor. This practice substantially ceased
many years ago, modern interceptors being designed to be installed in
conjunction with external water seal traps as a standard part of the system.

In addition to this clarication, with publication of the 2006 UPC plumbing code
three generic types of Grease Interceptor were introduced and have since become
the industry standard for designating the type of interceptor being considered.

Generically the application of a Grease Interceptor regardless of type is
dened as follows:

Grease Interceptor: “A plumbing appurtenance or appliance that is installed in

a sanitary drainage system to intercept nonpetroleum fats, oil, and grease (FOG)
from a wastewater discharge.

Specic characteristics then dene the three types of Interceptor:

Hydromechanical Grease Interceptor (HGI)

“An HGI is sized by ow rate (GPM) and qualied separation/retention eciency,
validated against National performance Standards. An HGI incorporates a dened
means of ow control, acts to entrain air to inuent, includes interior baing, or barriers
in combination or separately, working to promote hydromechanical separation. HGI’s
are generally installed inside the facility they serve.”

Gravity Grease Interceptor (GGI)

“A GGI is characterized by volume, minimum 30 minute retention time, bae(s), not
less than two compartments, a total volume of not less than 300 gallons (1135 L), and
gravity separation. If not recognized by an ocial body, a GGI will be designed by a
registered professional engineer. GGI’s are generally installed outside the building they
serve and buried below grade.”

Grease removal Device (GRD)

A GRD is a hydromechanical grease interceptor that mechanically removes non­petroleum fats, oils and grease (FOG) from the separation chamber, the control of which
is either automatic or manually initiated and involves maintaining a liqueed state of
intercepted FOG by heating. GRD’s are installed inside the facility they serve.”

Hydromechanical Grease Interceptor VS. Other Grease Interceptors

National Performance

Standards

Plumbing Code

Approvals/Listing

Specic AHJ Approval

Material

Eciency

Average Lifespan

Managed Flow

Cost Ratio Index -

Product

Annual Operation

Cost Ratio (Assumes

third party service)

Footprint Ratio

Sizing Method

Typical Installation

Time

Nature of Installation

Installer Prole

Product Availability

Endura (HGI) Endura XL (HGI) Hydromechanical Grease

7-50gpm 75-100gpm

- PDI-G101

- CSA B481

- ASME A112.14.3 (Type A)

- UPC

- IPC

- NPCC

- NSPC

Typically Not Typically Not Typically Not Yes Yes

Plastic (PP- Polypropylene) Plastic (PE/PP)- Polyethylene/

93%-99% - Based on ASME

A112.14.3 - Tested to breakdown

Min. 20 years - Typically life of system Min. 20 years - Typically life of

Yes - with Accessible Flow control Yes – Internal and External

1 0.6 (vs. GGI)

1 0.75 (vs. GGI)

1 0.3 (vs. GGI)

Flow Rate / Pipe Size Flow Rate / Pipe Size Flow Rate / Pipe Size Capacity (US Gallons) Flow Rate / Pipe Size

- On-Floor - 2-3hrs

- In Floor - 4-6hrs

- Licensed Plumber

- Common tools/practices

- Licensed Plumber - Licensed Plumber - Licensed Plumber - Licensed Plumber (Hook Up)

- Stock Item - National/Regional/
Local Plumbing Wholesale

- Restaurant Equipment Distributors

- PDI-G101 - CSA B481

- ASME A112.14.3 (Type A/C)

- UPC

- IPC

- NPCC

- NSPC

Polypropylene)

>98% - Based on ASME

A112.14.3 - NSF ES 15741

system

Accessible Flow control

0.9 (vs. HGI – Metal)

1-1.2 (vs. Plastic HGI)

0.9 (vs. HGI – Metal)

0.9 (vs. Plastic HGI)

0.9-1.2 (vs. HGI – Metal)

1.1 (vs. Plastic HGI)

- On-Floor - 2-3hrs

- In Floor – 4-8hrs

- Licensed Plumber/ Ground
worker

- Earthmoving/ Excavation
(below grade)

- Stock Item - National/

Regional/ Local Plumbing

Wholesale

Interceptors (HGI)

- PDI-G101

- CSA B481

- ASME A112.14.3

- UPC

- IPC

- NPCC

- NSPC

- Cast Iron

- Epoxy Coated Steel

- Plastic (PE)

Min 90% (based on Performance

Standards)

- Cast Iron (10-15 yrs)

- Epoxy Coated Steel (3-5yrs)

- Plastic (PE) (20yrs +)

Yes (Required for PDI compliance) No Yes

.9 - 1.5 8-10 6-8

1 8-10 0.5-1

1 Min 10 1

- On-Floor - 2-3hrs

- In Floor - 4-8hrs

- Licensed Plumber

- Common tools/practices

- National/Regional/ Local Plumbing
Wholesale

- Restaurant Equipment Distributor

Gravity Grease Interceptors

(GGI)

None - PDI-G101

- UPC (500 USG+)

- IPC (300 USG+)

- NPCC

- NSPC

- GRP/Fiberglass

- Concrete

- Steel

No Assessment Possible Min 90% (based on

- GRP/Fiberglass (20yrs+)

- Concrete (8-10yrs)

- Steel (7-12yrs)

12-15hrs 2-4hrs

- Licensed Plumber/ Groundworker

- Earthmoving/Excavation

- Ground worker (Install)

- Local/Regional Manufacturer Direct

- Special Order -Regional/Local
Plumbing Wholesale

Grease Removal

Device (GRD)

- ASME A112.14.4

Stainless Steel

Performance Standards)

- Tank (10yrs+)

- Mechanical (1-3yrs)

- Licensed Installer

- Common tools/

- Licensed Plumber

- Licensed Electrician

- Manufacturer Direct ­Local Representation

- CSA B481

- UPC

- IPC

practices

- 3 -

Model Chart

2000 lb
907 kg

10,000 lb

4536 kg

2000 lb
907 kg

10,000 lb

4536 kg

2000 lb
907 kg

10,000 lb

4536 kg

2000 lb
907 kg

10,000 lb

4536 kg

2000 lb
907 kg

10,000 lb

4536 kg

2000 lb
907 kg

10,000 lb

4536 kg

Product Description Connection

300 lb
135 kg

300 lb

135 kg

Endura® Compact Grease Interceptor

- 7 GPM 3907A02 - 10 GPM 3910A02
(Sux “T” for threaded inlet/outlet connections)

300 lb
135 kg

300 lb

135 kg

Endura® Grease Interceptor

- 15 GPM 3915A02 - 20 GPM 3920A02
(Sux “T” for threaded inlet/outlet connections)

300 lb
135 kg

Endura® Low Prole Grease Interceptor

- 25 GPM 3925A02LO
(Sux “T” for threaded inlet/outlet connections)

Endura® Grease Interceptor

- 25 GPM 3925XTA02 - 25 GPM 3925XTA03
(Sux “T” for threaded inlet/outlet connections - 3” only)

Endura® Grease Interceptor

- 35 GPM 3935A03 - 35 GPM 3935A04
(Sux “T” for threaded inlet/outlet connections - 3” only)

300 lb

135 kg

300 lb
135 kg

300 lb

135 kg

300 lb
135 kg

300 lb

135 kg

- Compact tank / small footprint

- Injection molded in proven
engineered thermoplastics for
strength and durability

- EZ-Open cover latches

- Odor lock cover gasket

- Load rated cover supports up to
300 lb (135kg) of pedestrian and
light duty trac

- EZ-Clean exterior tank prole with a
non-ribbed section at the lower two
inches of the tank

- 10 Year Limited Manufacturers Warranty

- Injection molded in proven
engineered thermoplastics for
strength and durability

- EZ-Open cover latches

- Odor lock cover gasket

- Load rated cover supports up to
300 lb (135kg) of pedestrian and light
duty trac

- 10 Year Limited Manufacturers Warranty

- 11” in height, ideal for under sink
installation

- Requires only 5” of clearance for
maintenance

- Injection molded in proven engineered
thermoplastics for strength and
durability

- EZ-Open cover latches

- Odor lock cover gasket

- EZ-Clean tank exterior

- 10 Year Limited Manufacturers Warranty

- Injection molded in proven engineered
thermoplastics for strength and
durability

- EZ-Open cover latches

- Odor lock cover gasket

- Load rated cover supports up to
300 lb (135kg) of pedestrian and light
duty trac

- 10 Year Limited Manufacturers
Warranty

- Supplied with 2 piece ow control

- Injection molded in proven engineered
thermoplastics for strength and
durability

- EZ-Open cover latches

- Odor lock cover gasket

- Load rated cover supports up to
300 lb (135kg) of pedestrian and light
duty trac

- 10 Year Limited Manufacturers
Warranty

- Supplied with 2 piece ow control

Recycled

Size

- 7 GPM 3907A02 - 2”

- 10 GPM 3910A02 - 2”

- 15 GPM 3915A02C - 2”

Connected using
mechanical joint couplings
allowing for use of various
piping materials.

- 20 GPM 3920A02 - 2” Minimum of 5%

Connected using
mechanical joint couplings
allowing for use of various
piping materials.

- 25 GPM 3925A02LO - 2” Minimum of 5%

Connected using
mechanical joint couplings
allowing for use of various
piping materials.

- 25 GPM 3925XTA02 - 2”

- 25 GPM 3925XTA03 - 3”

Connected using
mechanical joint couplings
allowing for use of various
piping materials.

- 35 GPM 3935A03 - 3”

- 35 GPM 3935A04 - 4”

Connected using
mechanical joint couplings
allowing for use of various
piping materials.

Content

Minimum of 5%

Minimum of 5%

Minimum of 5%

On-Floor In-Floor Extension Riser Flow Control

300 lb
135 kg

300 lb

135 kg

Endura® Grease Interceptor

- 50 GPM 3950A03 - 50 GPM 3950A04
(Sux “T” for threaded inlet/outlet connections - 3” only)

- 4 -

- Injection molded in proven engineered
thermoplastics for strength and
durability

- EZ-Open cover latches

- Odor lock cover gasket

- Load rated cover supports up to
300 lb (135kg) of pedestrian and light
duty trac

- 10 Year Limited Manufacturers
Warranty

- Supplied with 2 piece ow control

- 50 GPM 3950A03 - 3”

- 50 GPM 3950A04 - 4”

Connected using
mechanical joint couplings
allowing for use of various
piping materials.

Minimum of 5%

• Check local codes for acceptance of in-oor installation

• Finish to oor level accommodating requisite materials,
E.G. Tile, mortar, etc.

• Finish to oor level accommodating requisite materials,
E.G. Tile, mortar, etc.

• Compatible with 3915A02 and 3920A02

On-Floor

Installation Only N/A N/A

N/A N/A

6” Modular riser

- Measurement markings

- Stackable up to 3 sets (18” Total)

- 3920AX6

Extension

Sleeve kit for 3” model only,
allows access to in-oor ow
control device

Custom length of SDR 35 or SDR
28 sewer pipe to be used for
access sleeve

- 3” 392203W, 6” SDR 35/28
sewer pipe diameter

Standards

Conformance

*

Excluding 7 GPM

*

Listings Thermal

Capability

NYC

Commonwealth

of Massachusetts

Continuous

discharge at

104˚C (220˚F)

NYC

Commonwealth

of Massachusetts

Continuous

discharge at

104˚C (220˚F)

NYC

Commonwealth

of Massachusetts

Continuous

discharge at

104˚C (220˚F)

Remarks

3-Part Master Format
Specications, CAD
Drawings & BIM
Drawings available at

.com

Installation
Guide contact

tech-support@
endurainterceptor.com

3-Part Master Format
Specications, CAD
Drawings & BIM
Drawings available at

.com

Installation
Guide contact

tech-support@
endurainterceptor.com

3-Part Master Format
Specications, CAD
Drawings & BIM
Drawings available at

.com

Installation
Guide contact

tech-support@
endurainterceptor.com

• Finish to oor level accommodating requisite
materials, E.G. Tile, mortar, etc.

• Finish to oor level accommodating requisite
materials, E.G. Tile, mortar, etc.

• Finish to oor level accommodating requisite
materials, E.G. Tile, mortar, etc.

6” Modular riser

- Measurement markings

- Stackable up to 3 sets (18” Total)

- 3925AX6

6” Modular riser

- Measurement markings

- Stackable up to 3 sets (18” Total)

- 3935AX6

6” Modular riser

- Measurement markings

- Stackable up to 3 sets (18” Total)

- 3935AX6

Sleeve kit allows access to
in-oor ow control device

Custom length of SDR 35 or SDR
28 sewer pipe to be used for
access sleeve

- 3” 392203W, 6” SDR 35/28
sewer pipe diameter

Sleeve kit allows access to
in-oor ow control device

Custom length of SDR 35 or SDR
28 sewer pipe to be used for
access sleeve

- 3” 392203W, 6” SDR 35/28
sewer pipe diameter

- 4” 392204W, 8” SDR 35/28
sewer pipe diameter

Sleeve kit allows access to
in-oor ow control device

Custom length of SDR 35 or SDR
28 sewer pipe to be used for
access sleeve

- 3” 392203W, 6” SDR 35/28
sewer pipe diameter

- 4” 392204W, 8” SDR 35/28
sewer pipe diameter

NYC

Commonwealth

of Massachusetts

NYC

Commonwealth

of Massachusetts

NYC

Commonwealth

of Massachusetts

Continuous

discharge at

104˚C (220˚F)

Continuous

discharge at

104˚C (220˚F)

Continuous

discharge at

104˚C (220˚F)

3-Part Master Format
Specications, CAD
Drawings & BIM
Drawings available at

.com

Installation
Guide contact

tech-support@
endurainterceptor.com

3-Part Master Format
Specications, CAD
Drawings & BIM
Drawings available at

.com

Installation
Guide contact

tech-support@
endurainterceptor.com

3-Part Master Format
Specications, CAD
Drawings & BIM
Drawings available at

.com

Installation
Guide contact

tech-support@
endurainterceptor.com

- 5 -

Dimensions

Endura®
7GPM - 10GPM Models

3907A02 7GPM (0.44 LPS)

2” (51mm) connection

3910A02 10GPM (0.63 LPS)

2” (51mm) connection

Notes: ACCESSIBLE FLOW CONTROL DEVICE (FCD) IS
SUPPLIED FOR INSTALLATION UPSTREAM OF THE GREASE
INTERCEPTOR (GI) -2” INLET/OUTLET MODELS

2” FCD

Endura®
15GPM - 20GPM Models

3915A02 15GPM (0.94 LPS)

2” (51mm) connection

3920A02 20GPM (1.26 LPS)

2” (51mm) connection

Notes: ACCESSIBLE FLOW CONTROL DEVICE (FCD) IS
SUPPLIED FOR INSTALLATION UPSTREAM OF THE GREASE
INTERCEPTOR (GI) -2” INLET/OUTLET MODELS

2” FCD

Endura® Lo-PRO
Grease Interceptor
25GPM Model

3925A02LO 25GPM (1.6 LPS)

2” (51mm) connection

Notes: ACCESSIBLE FLOW CONTROL DEVICE (FCD)
IS SUPPLIED FOR INSTALLATION UPSTREAM OF THE
GREASE INTERCEPTOR (GI) -2” INLET/OUTLET MODEL

2” FCD

- 6 -

Endura® 25GPM Models

3925XTA02 25GPM (1.6 LPS)

2” (51mm) connection

3925XTA03 25GPM (1.6 LPS)

3” (76mm) connection

2” FCD

3” FCD

Notes: ACCESSIBLE FLOW CONTROL DEVICE (FCD)
IS SUPPLIED FOR INSTALLATION UPSTREAM OF
THE GREASE INTERCEPTOR (GI) - 2” , 3” INLET/
OUTLET MODELS

Endura® 35GPM Models

3935A03 35GPM (2.2 LPS)

3” (76mm) connection

3935A04 35GPM (2.2 LPS)

4” (110mm) connection

3” FCD

4” FCD

A

B

3925XTA02

A 4 ” 4.5”

B 12.5” 12”

(2”)

3925XTA03

(3”)

Notes: ACCESSIBLE FLOW CONTROL DEVICE (FCD) IS
SUPPLIED FOR INSTALLATION UPSTREAM OF THE GREASE
INTERCEPTOR (GI) - 3” or 4” INLET/OUTLET MODELS

Endura® 50GPM Models

3950A03 50GPM (3.2 LPS)

3” (76mm) connection

3950A04 50GPM (3.2 LPS)

4” (110mm) connection

3” FCD

4” FCD

Notes: ACCESSIBLE FLOW CONTROL DEVICE (FCD) IS SUPPLIED
FOR INSTALLATION UPSTREAM OF THE GREASE INTERCEPTOR
(GI) - 3” or 4” INLET/OUTLET MODELS

- 7 -

Model Chart

Grade

.625" Raised Cover

Grade

.625" Raised Cover

10,000 lb

4536 kg

10,000 lb

4536 kg

Product Description Connection

2000 lb

907 kg

M

Load Rating

Endura® XL Grease Interceptor

- XL75 – 75GPM 4075A04(T)

- XL75 – 75GPM 4075A04M(T)

2000 lb

907 kg

M

Load Rating

Endura® XL Grease Interceptor

- XL100 – 100GPM 40100A04(T)

- XL100 – 100GPM 40100A04M(T)

S

S

10,000 lb

4536 kg

Load Rating

10,000 lb

4536 kg

Load Rating

- 559lb Grease Capacity
>98% Eciency

- Dynamic Inlet Bae – Internal
ow Control (Supplied Standard)

· Optional External ow control
(PDI G101)

· Seamless Tank – Rotationally
moulded using up to 100%
recompounded material

· Dual Access Covers

- Mechanically secured

- Trac rated CSA B481.0 Type ‘S’

- Pedestrian/Light Trac
CSA B481.0 Type ‘M’

· Airtight/Watertight cover, frame
and adjustable riser system

· Limited Lifetime Warranty

- 1058lb Grease Capacity
>98% Eciency

- Dynamic Inlet Bae – Internal
ow Control (Supplied Standard)

· Optional External ow control
(PDI G101)

· Seamless Tank – Rotationally
moulded using up to 100%
recompounded material

· Dual Access Covers

- Mechanically secured

- Trac rated CSA B481.0 Type ‘S’

- Pedestrian/Light Trac
CSA B481.0 Type ‘M’

· Airtight/Watertight cover, frame
and adjustable riser system

· Limited Lifetime Warranty

Size

Inlet - 4” Sch40 DWV
Outlet – 4” Sch40 DWV
FTP 4” Optional for Inlet &
Outlets (Sux ‘T’)
Outlet (Side) – 4” SDR35
Sewer

Connected using
mechanical joint couplings
allowing for use of various
piping materials.

Consult local code for
connection format
compliance.

Inlet - 4” Sch40 DWV
Outlet – 4” Sch40 DWV
FTP 4” Optional for Inlet &
Outlets (Sux ‘T’)
Outlet (Side) – 4” SDR35
Sewer

Connected using
mechanical joint couplings
allowing for use of various
piping materials.

Consult local code for
connection format
compliance.

Access
Covers

Trac Rated

CSA B481.0 Type ‘S’

Grade

.625" Raised Cover

Pedestrian/Light Trac Rated

CSA B481.0 Type ‘M’

Cover Flush to Grade

Trac Rated

CSA B481.0 Type ‘S’

Grade

.625" Raised Cover

Pedestrian/Light Trac Rated

CSA B481.0 Type ‘M’

Cover Flush to Grade

On-Floor

TRAFFIC RATED

PEDESTRIAN / LIGHT TRAFFIC

- 8 -

Dimensions - XL models

Endura® XL
75GPM Models

4075A04

75GPM (4.74 LPS)
4” (110 mm) no hub
connection

4075A04T

75GPM (4.74 LPS)
4” (110 mm) female threaded
connection (FPT)

4075A04M

75GPM (4.74 LPS)
4” (110 mm) no hub
connection

4075A04MT

75GPM (4.74 LPS)
4” (110 mm) female
threaded connection
(FPT)

Notes: ACCESSIBLE FLOW CONTROL
DEVICE (FCD) IS SUPPLIED FOR
INSTALLATION UPSTREAM OF
THE GREASE INTERCEPTOR (GI)

-4” INLET/OUTLET MODELS

4” External FCD

Pipe by

others