Endura ENAR24HC Operator's Manual
ENAR24HC
Endura Gas Powered Aerator
Operator’s Manual
Technical Support Hotline
®
English Service
T : 1-888-332-4012
F : 1-866-567-0956
email your technical questions and comments to:
service@uniquip.ca
visit our website:
www.uniquip.ca
French Service
T : 1-800-332-4012
F : 1-866-825-2221
DO NOT operate this equipment until you have read and
understood all the enclosed Operator’s Manual.
!
READ ALL the sections in this manual PRIOR to attempting to
service, maintain or operate this equipment.
Copyright Uniquip Canada 2005.
All rights reserved.
A
www.uniquip.ca
Endura Warranty Statement
Uniquip Canada Inc. guarantees all Uniquip Endura Professional Aerators to be free from any manufacturer’s de-
fects in material and workmanship for a period of one (1) year from the date of purchase . This warranty is exclusive of the
engine (please consult the accompanying engine manual with your unit for details), and any normal wear and tear and/or
consumable parts, such as, but not limited to, coring tines, clutch, clutch lining, drive belt, and throttle cable. All normal
wear and tear and/or consumable parts are protected from manufacturer’s defects in material and workmanship for a period of thirty (30) days from the date of purchase.
Endura Warranty Summary Protection
1. Uniquip Endura Professional Aerator Unit 1 year parts and labour
2. Uniquip Endura normal wear and tear parts
or consumable parts
3. Engine Consult with engine manufacturer
To make a warranty claim within this time period, please contact the Service Manager at Uniquip Canada Inc.,
1-888-332-4012, who will advise the validity and claim procedure. Once the claim has been accepted by Uniquip Canada, the unit and/or parts should be shipped to Uniquip Canada or the specifi ed Authorized Service Centre at the customer’s
expense. Be sure to securely pack the unit and parts in a strong container. Damage in transit is not covered by this warranty.
All approved repairs under this warranty will be returned by Uniquip Canada free of charge.
30 days parts and labour
Warranties expressed in this document are void if repairs are attempted by anyone other than an Authorized
Service Centre or Uniquip Canada or if the unit has been modifi ed from original factory design in any way. This warranty
is expressly conditional upon the customer’s compliance with all precautions and instructions contained in this manual and
excludes any claims made as a result of abuse, neglect, accident, normal wear and tear and misuse. This warranty is nontransferable.
Uniquip Canada Inc.’s liability under warranty is limited to repair of the product and/or replacement of parts and is
given to the purchaser in lieu of all other remedies including incidental and consequential charges. There are no expressed
warranties other than those specifi ed herein.
Technical Support Hotline
T : 1-888-332-4012
F : 1-866-567-0956
English Service
email your technical questions and comments to:
French Service
T : 1-800-332-4012
F : 1-866-825-2221
service@uniquip.ca
visit our website:
www.uniquip.ca
Bwww.uniquip.ca
Endura Warranty Registration
Congratulations for choosing an Endura product to meet all your tough jobsite needs! Please fi le your original bill of
purchase for this unit in a safe place. For warranty service of your Endura product, you will need to provide a copy of this
document to confi rm your warranty status.
Product registration is a key step toward enjoying your new Endura product! While registration is not necessary to
enjoy our manufacturer’s warranty, there are many benefi ts to participating in this program. Registration helps to facilitate
warranty service, and notify you of any updates, changes, and service advisories on your product. Complete this Warranty
Registration Card and fax it to 1-866-825-2221 or mail it to the address on the back of this card:
Warranty Registration Information
A.Ownership Information
Owner’s Name:
Company Name:
Company Address:
Company Telephone:
Company Fax:
Company E-Mail:
Company Website:
B.Machine Information
Machine Make:
Machine Model #
Machine Serial #
Date of Purchase:
C.Product Information Update
Can we contact you with any product-related news?
Who should we contact?
Contact Telephone:
Contact Fax:
Contact E-Mail:
What is the preferred contact method?
Fold along dotted line
Place
Stamp
Here
Uniquip Canada Inc.
4101 boul. Industriel
Laval QC
H7L 6G9
ATTN: SERVICE DEPARTMENT
Fold along dotted line
®
ENAR24HC
Endura Gas Powered Aerator
Operator’s Manual
Contents
Pre-Operation Note 1
Safety Precautions 2
Guide to Parts Breakdown 4
Machine Parts Breakdown 5
Parts List 6
Information on Safety Decals 11
Setting Up the ENAR24HC Aerator 12
Contents List 12
Pre-Operation Procedures 12
Operation Procedures 14
A.Transporting the ENAR24HC 14
B.Preparing to aerate 14
C.Aerating on Flat Surfaces 14
D.Aerating on Inclined Surfaces 15
Storing the ENAR24HC 15
Maintenance Procedures 16
A.Inspection Schedule 16
B.Preventative Maintenance Procedures 16
1.Cleaning the ENAR24HC 16
2.Lubrication Schedule 17
C.General Service Procedures 17
1.Replacing Individual Tines 18
2.Adjusting the Drive Chain 19
3.Changing the Drive Chain (ENAR24HC-37) 19
4.Changing and Adjusting the Drive Belt (ENAR24HC-14) 19
5.Replacing the Rotor Assembly (ENAR24HC-42) and Bearing Assemblies (ENAR24HC-38) 20
Troubleshooting 21
DO NOT operate this equipment until you have read and
understood all the enclosed Operator’s Manual.
!
READ ALL the sections in this manual PRIOR to attempting to
service, maintain or operate this equipment.
Copyright Uniquip Canada 2005.
All rights reserved.
1
www.uniquip.ca
Pre-Operation Note
Thank you for your purchase of the Uniquip Endura ENAR24HC Professional Aerator. This aerator has been designed and manufactured to our highest quality demands for durability and performance.
Uniquip Canada Inc. is committed to offering durable products and quality after-market service. The ENAR24HC
Professional Aerator is warranted to be free from manufacturer’s defects in material and workmanship for a period of one
(1) year from the date of purchase. This warranty will be void if the machine has not been operated and maintained in
the manner prescribed in this Operator’s Manual. Any machine malfunctions, and/or warranty claims that arise from the
misinterpretation or the misunderstanding of the instructions and cautions discussed in this booklet will not be eligible for
warranty protection.
In order for the aerator to perform at its optimum capabilities, the operator must read this manual thorough-
ly before using this unit. This Operator’s Manual contains important product operation procedures, safety precautions,
maintenance and troubleshooting tips as well as other advisories. Please keep this manual nearby when operating the lift as
a reference should any questions arise.
The Endura ENAR24HC is a self-propelled aerator designed for aerating established lawns and large grass covered
areas. The machine should not be used for any other purpose than that stated above. The inappropriate use of any machine can cause serious damage and/or bodily harm to the environment and operator. It is imperative that the operator
of this equipment be responsible for the operational environment of the aerator. Please be prepared and well-informed
for all specifi c requirements precautions and work hazards that may and/or do exist at the jobsite.
Powered by a 5.5 hp Honda engine, the Endura ENAR24HC is a powerful unit driving 24 replaceable spring steel
coring tines on a reel for deep, penetrating aeration. For optimum aeration results, ensure that the lawn is mowed to its normal cut height, and thoroughly watered the day before aeration. Inspect your jobsite for any debris such as rocks, wiring,
string or any other items that can become hazardous during work. Identify and mark all fi xed objects to be avoided during
work, such as sprinkler heads, water valves, buried cables, or clothes line anchors etc. The jobsite environment, soil conditions, job specifi cations and operator experience will all be factors that must be considered to select the proper tool for the
job. Failure to maintain the aerator in a proper manner will lead to decreased productivity of the tool and hazards to the
operator and bystanders. Do not use the machine if it has been modifi ed or improperly maintained.
All jobsites are different. Please ensure that when using the Endura Aerator, all local bylaws and codes are followed. All operators and mechanics of this machine should be trained in general machine use and safety.
Every care and effort has been made to ascertain the accuracy and completeness of procedures described in this
document to ensure your enjoyment and satisfaction. If you have any questions or concerns, please contact the Service Department at Uniquip Canada Inc. at 1-888-332-4012.
Safety Precautions
1. READ AND UNDERSTAND OPERATOR’S MANUAL PRIOR TO USE OF AERATOR
2. Before operating aerator, ensure that it is structurally and mechanically safe by checking the following:
a. Are all engine controls and the clutch action functioning within acceptable tolerances?
b. Are the belt and chain in good condition?
c. Are wheel ratchets working properly?
d. Are the protective guards in place?
If any of the above checks fail, please take
necessary steps to maintain or repair the unit
!
3. Before using the aerator on proposed jobsite, perform the following environmental checks:
a. Inspect the entire work area for unexpected buried hazards, such as boulders, foundations, and fencing
b. Clean work area of any litter or debris, such as wire, boards, rocks, or any other potential hazards
c. Know and mark the location of any and all buried utility lines or sprinkler systems. If in doubt,
always check with your local utilities provider for survey information and assistance.
before operating it in any environment.
2www.uniquip.ca
!
d. Check for ventilation in area. Do not operate the aerator or run the engine in unventilated areas.
ALWAYS OPERATE AERATOR OUTDOORS!!
4. When operating the aerator, follow these guidelines for operator’s personal safety:
a. Always wear proper safety clothing and equipment for the job. These can and should include eye
and ear protection, gloves, dust mask and any other items that are appropriate for the job and
jobsite requirements
b. Never wear any jewelry, neck ties, or other loose or hanging items that can be caught on any part
of the machine
c. Tie back or remove any loose hair, clothing and any other potential hazards and obstructions
d. Keep all hands, loose clothing, hair, jewelry and all other personal parts and belongings away from
moving parts of the machine.
e. Avoid coming in contact with the muffl er and other engine parts after the engine is started and the time
immediately after the machine is turned off. Machine and engine temperatures may exceed 150ºF or
66ºC. Machine must be allowed to cool before touching it or attempting to perform any maintenance!
5. For the safety of others and that of the operator, observe the following precautions:
a. Keep observers and bystanders away from the aerator and its immediate working environment
(i.e.: the turf that is being aerated etc.) while the aerator is in use.
b. Stop operations or if anyone or anything (i.e.: humans, animals, debris etc.) approaches from the front
or the sides while the machine is in operation.
c. Stop work and turn off the aerator if it hits any debris that jams the machine or causes it to labour
unnecessarily. Inspect the aerator and surrounding environment for any possible causes.
d. If the machine is jammed, stop the engine and remove the sparkplug wire before attempting to clear
any jams in the unit.
e. Never leave machine unattended
f . DO NOT, under any circumstances, operate machine if any of the following conditions are applicable:
i. Any impairment (i.e.: medical conditions, medicinal side-effects, alcohol, drugs etc.)
of the operator.
ii. The operator has not read or understood the operator’s manual for this machine.
iii. The operator does not clearly understand the operations of the machine.
iv. The machine is in need of repair
v. The operator is inappropriately attired to operate the machine.
Call your local utility company so that they can locate and mark these lines for you. Any cut electrical cable or gas line can result in injury or fatality.
3
www.uniquip.ca
Safety Precautions cont’d ...
6. Due to the nature of the machine and the tasks that it is designed to perform, the aerator may behave in the
following manner:
a. Always start aerating a safe distance away from any object such as a fence, foundation or any other
structural obstructions. The coring tines could possibly catch and climb on the object.
b. Use extreme caution when operating aerator on uneven terrain. Do not risk the possibility of tipping
over the machine or causing it to rollover.
SAVE THESE INSTRUCTIONS!!
4www.uniquip.ca
Guide to Parts Breakdown
Regular maintenance and parts replacement are important steps to extending the life of your equipment and enjoying its optimum performance. When performing or conducting any maintenance or repairs, always check that your working
surroundings are safe and well-ventilated and that the technician is familiar and comfortable with all aspects of the machine
and required procedures.
This guide aims to serve as a representational guide to the ENAR24HC. Any other uses or application beyond the
scope of this document are strictly prohibited. While every attempt has been made to maintain its accuracy, Uniquip Canada Inc. reserves the right to update and modify the equipment without prior notifi cation. Prior to undertaking to perform any
maintenance or repair procedures, please contact our Technical Support Hotline for clarifi cation and to acquire appropriate
parts.
To order spare parts, please provide the following information:
1. Machine Make
2. Model Number
3. Machine Serial Number
4. Quantity Required of Each Part
5. Part Numbers
6. Part Descriptions.
All Endura parts are guaranteed by a thirty (30) day warranty against any manufacturer’s defects in workmanship
and material. Consult page A in the Operator’s Manual for further details on our Warranty Policy.
Technical Support Hotline
English Service
T : 1-888-332-4012
F : 1-866-567-0956
email your technical questions and comments to:
service@uniquip.ca
visit our website:
www.uniquip.ca
French Service
T : 1-800-332-4012
F : 1-866-825-2221
Loading...