Endless Pools E500 Owner's Manual
E500
OWNER'S MANUAL
WELCOME
Watkins Manufacturing Corporation congratulates you on your decision to enjoy the finest fitness
system available. Welcome to the growing family of fitness systems by ENDLESS POOLS owners.
OWNER’S MANUAL
This Owner’s Manual will acquaint you with the operation and general maintenance of your new fitness system. We suggest
that you take some time to carefully review all sections. Please keep this manual available for reference.
If you have questions about any aspect of your fitness system’s set-up, operation or maintenance, contact your authorized
ENDLESS POOLS dealership. They are trained professionals who are familiar with the product, as well as new fitness
system ownership concerns. Their expertise will facilitate the enjoyment of your new fitness system.
The serial number/identification label is located within the equipment compartment of your fitness system. The serial
number should also be documented on the delivery receipt from your dealer.
IMPORTANT: Watkins Manufacturing Corporation reserves the right to change specifications, or design, without notification
and without incurring any obligation.
DATE PURCHASED: ___________________________________
DATE INSTALLED: _____________________________________
DEALER: ____________________________________________
ADDRESS: ___________________________________________
TELEPHONE: _________________________________________
MODEL/SERIAL NUMBER: ______________________________
COVER SERIAL NUMBER: ______________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of exterior surfaces (decks and
gazebos). In addition, some communities have adopted residential barrier codes which may require fencing and/or self-closing gates on the property
to prevent unsupervised access to the fitness system by children. As a general practice, your local Building Department will inform you of any
applicable barrier requirements at the time a permit is obtained for the installation of an electrical circuit. Your ENDLESS POOLS dealer can provide
information on which permits may be required.
TABLE OF CONTENTS
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS .............................. 1
IMPORTANT FITNESS SYSTEM INSTRUCTIONS ............ 3
SITE REQUIREMENTS
INDOOR CONSIDERATIONS ............................................... 4
OUTDOOR CONSIDERATIONS ........................................... 4
ELECTRICAL REQUIREMENTS
230 VOLT PERMANENTLY CONNECTED .......................... 5
EQUIPMENT COMPARTMENT ............................................ 6
DOOR PANEL REMOVE & REPLACE ................................. 6
GETTING STARTED
MAIN FITNESS SYSTEM FEATURES ................................. 7
ADDITIONAL FITNESS SYSTEM FEATURES .................... 7
HYDROMASSAGE JETS....................................................... 8
WATER QUALITY AND MAINTENANCE
BASIC INFORMATION ......................................................... 15
CHEMICAL SAFETY ...........................................................15
HOW TO ADD CHEMICALS
TO THE WATER....................................................................15
FUNDAMENTALS OF
WATER MAINTENANCE .....................................................15
THE ENDLESS POOLS WATER MAINTENANCE
PROGRAM ............................................................................ 16
VACATION WATER CARE INSTRUCTIONS ..................... 17
GLOSSARY ........................................................................... 18
CARE AND MAINTENANCE
FILTER MAINTENANCE ...................................................... 19
FILTER CARTRIDGE REMOVAL AND CLEANING
INSTRUCTIONS ................................................................... 19
DRAINING YOUR
FITNESS SYSTEM ....................................20
WATERFALL VALVE ............................................................... 8
AIR CONTROLS ..................................................................... 8
SWIM MACHINE-HYDRAULIC ............................................. 8
TREADMILL-HYDRAULIC (OPTIONAL) .............................. 8
PACE DISPLAY (OPTIONAL) ................................................ 9
QUICK START-UP INSTRUCTIONS .................................... 9
OPERATING INSTRUCTIONS
MAIN CONTROL PANEL ..................................................... 11
SETTINGS ............................................................................. 11
AUDIO IN.STREAM (OPTIONAL) ....................................... 13
TEMPERATURE CONTROL ..............................................13
JETS CONTROL ................................................................... 14
LIGHT CONTROL ................................................................. 14
FILTER CYCLES ................................................................... 14
PREVENTION OF FREEZING ............................................ 20
WINTERIZING YOUR FITNESS SYSTEM ........................20
CARE OF THE PILLOWS ................................................... 20
CARE OF THE EXTERIOR ..................................................21
SERVICE INFORMATION
GENERAL INFORMATION .................................................. 22
GFCI AND HIGH LIMIT THERMOSTAT .............................. 22
MISCELLANEOUS SERVICE INFORMATION .................. 22
ACTS INVALIDATING WARRANTY .................................... 22
DISCLAIMERS ...................................................................... 23
WATKINS CUSTOMER SERVICE ...................................... 23
TROUBLESHOOTING ......................................................... 23
ALL OFF / MEMORY ON ..................................................... 14
WI-FI IN.TOUCH™ (OPTIONAL) .......................................14
AUXILIARY CONTROL PANEL ........................................... 14
Safety InformatIon
NO DIVING
IMPORTANT SAFETY
INSTRUCTIONS
Danger: Diving May Result
in serious injury or death.
(READ AND FOLLOW ALL
INSTRUCTIONS)
AVOIDING THE RISK TO CHILDREN
DANGER - RISK OF CHILD DROWNING
Extreme caution must be exercised to prevent unauthorized access by
children. To avoid accidents, ensure that children cannot use a
system
unless they are supervised at all times.
WARNING
To reduce the risk of injury, do not permit children to use this
system
unless they are closely supervised at all times.
• To reduce the risk of injury, lower water temperatures are
recommended for young children. Children are especially sensitive to
hot water.
• Extreme caution must be exercised to prevent unauthorized access
by children. To avoid accidents, ensure that children cannot use the
fitness system
unless they are supervised at all times.
DO:
• Make sure you always lock any child resistant locks after using the
fitness system
• Test the water temperature with your hand before allowing children to
enter the
• Remind children that wet surfaces can be very slippery. Make sure
that children are careful when entering or exiting the
for your children’s safety.
fitness system
to be sure that it’s comfortable.
fitness system
DON'T:
• Allow children to climb onto a
• Allow children to have unsupervised access to the
fitness system
cover.
fitness system
AVOIDING THE RISK OF ELECTROCUTION
DANGER - RISK OF ELECTROCUTION
• Connect only to a grounded source.
• Do not bury the power cord. A buried power cord may result in death,
or serious personal injury due to electrocution if direct burial-type cable
is not used, or if improper digging occurs.
• A ground terminal (pressure wire connector) is provided on the control
box inside the unit to permit connection of a minimum No. 6 AWG
(16 mm²) solid copper bonding conductor between this point and any
metal equipment, metal water pipe, metal enclosures of electrical
equipment, or conduit within five feet (1.5 m) of the unit as needed to
comply with local requirements.
• Do not connect any auxiliary components (for example, cable,
additional speakers, headphones, additional audio components) to the
audio system unless approved by Watkins Manufacturing Corporation
fitness
fitness
.
.
• Do not self service the audio component by opening or removing
fitness system
other risk of injury. Refer all servicing to qualified service personnel.
• Do not attach an external antennae to a
unless installed by a licensed electrician in accordance with Article 810
of the National Electric Code, ANSI/NFPA 70.
door panel as this may expose dangerous voltage or
fitness system
audio system
WARNING
• To reduce the risk of electrical shock, replace a damaged cord
immediately. Failure to do so may result in death or serious personal
injury due to electrocution.
• Your
fitness system
(GFCI) for user and equipment protection. To ensure proper operation
of this important safety device, test according to the following
instructions:
• A ground terminal is provided inside the junction box. To reduce
the risk of electric shock, connect this terminal to the grounding
terminal of your electrical service or supply panel with a continuous
green, insulated copper wire. The wire must be equivalent in size
to the circuit conductors supplying the equipment. In addition, a
bonding terminal (pressure wire connector) is provided on the
outside of the control box/heater for bonding to local ground
points. To reduce the risk of electric shock, this connector should
be bonded with a No. 6 AWG (16 mm²) solid copper wire to any
metal ladders, water pipes, or other metal within 5 feet (1.5 m) of
the
fitness system
of disconnection must be readily
at least 5 feet (1.5 m) from the
• Your
fitness system
breaker to open all ungrounded supply conductors.
• Your
fitness system
electrical subpanel. Before each use of the
with the unit operating, push the TEST button on each breaker.
The switch should click over to the “Trip” position. Wait 30 seconds
and reset each GFCI breaker by switching it completely off and
then completely on. The switch should then stay on. If either of the
interrupters does not perform in this manner, it is an indication of
an electrical malfunction and the possibility of an electric shock.
Disconnect the power until the fault has been identified and
corrected.
is provided with a Ground Fault Circuit Interrupter
to comply with local requirements. The means
accessible, but must be installed
fitness system
is provided with a suitably rated circuit
uses ground fault circuit interrupters in the
.
fitness system
and
DANGER - RISK OF ELECTRICAL SHOCK
• Install at least 5 feet (1.5 m) from all metal surfaces. A
may be installed within 5 feet of a metal surface if each metal surface
is permanently connected by a minimum No. 8 AWG (10 mm²) solid
copper conductor attached to the wire ground connector on the heater
terminal block that is provided for this purpose.
• Install your
the electrical compartment and from all electrical components.
• Do not permit any electrical appliances, such as a light, telephone,
radio, or television within 5 feet (1.5 m) of a
to maintain a safe distance may result in death, or serious personal
fitness system
is such a way that drainage is away from
fitness system
fitness system
. Failure
Safety Information
Page 1
injury due to electrocution, if the appliance should fall into the
system
.
fitness
DO:
• Be sure your
correctly - use a licensed electrical contractor.
• Disconnect the
the
fitness system
• Test the Ground Fault Circuit Interrupter(s) before each use.
• Replace audio components only with identical components (if your
fitness system
fitness system
fitness system
or servicing the electrical components.
is equipped with an audio component).
is connected to the power supply
from the power supply before draining
DON'T:
• Use the
• Place electrical appliances within 5 feet (1.5m) of the
• Use an extension cord to connect the
• Attempt to open the electrical control box. There are no user serviceable
fitness system
removed.
source. The cord may not be properly grounded and the connection is
a shock hazard. An extension cord may cause a voltage drop, which
will cause overheating of the jet pump motor and motor damage.
parts inside.
with the equipment compartment door
fitness system
fitness system
to its power
.
RISKS TO AVOID
DANGER - RISK OF INJURY
• To reduce the risk of injury to persons, DO NOT remove suction fittings
(filter standpipes) located in the filter compartment.
• The suction fittings in the
specific water flow created by the pump. Never replace a suction fitting
with one rated less than the flow rate marked on the original suction
fitting.
• There is a danger of slipping and falling. Remember that wet surfaces
can be very slippery. Take care when entering or exiting the
system
.
• Never operate
missing.
• People with infectious diseases should not use the
• Keep any loose articles of clothing, long hair, or hanging jewelry away
from rotating jets or other moving components. Long hair should be
tied up or placed under a bathing cap.
• Safe water temperature for aquatic exercise is approximately
85°F (29.5°C).
• DO NOT use this
fitness system
fitness system
if the suction fittings are broken or
fitness system
are sized to match the
alone.
fitness
fitness system
.
HEALTH PROBLEMS AFFECTED BY FITNESS
SYSTEM USE
• Pregnant women should consult a physician before using
system
.
• Persons suffering from obesity, or with a medical history of heart
disease, low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using
fitness
fitness system
.
UNCLEAN WATER
• Keep the water clean and sanitized with correct chemical care. The
recommended levels for your ENDLESS POOLS
Free Available Chlorine:
1.0-5.0 ppm
Water pH:
7.2-7.8
• Refer to Water Quality and Maintenance section for complete
instructions.
IMPORTANT: Turn on the jet pump for a least ten minutes after adding
ANY
fitness system
Clean the filter cartridges monthly to remove debris and mineral buildup
which may affect the performance of the hydromassage jets, limit the
flow, or trip the high limit thermostat, which will turn off the entire
system
.
water chemicals into the filter compartment.
Total Alkalinity:
Calcium Hardness:
fitness system
80-120 ppm
50-150 ppm
are:
fitness
AVOIDING THE RISK OF HYPERTHERMIA
Prolonged immersion in hot water can result in HYPERTHERMIA, a
dangerous condition which occurs when the internal temperature of
the body reaches a level above normal 98.6°F (37°C). The symptoms
of hyperthermia include unawareness of impending hazard, failure to
perceive heat, failure to recognize the need to exit the
physical inability to exit the
women, and unconsciousness resulting in a danger of drowning.
fitness system
, fetal damage in pregnant
fitness system
,
WARNING
The use of alcohol, drugs, or medication can greatly increase the risk of
fatal hyperthermia in
fitness system
s.
TO REDUCE THE RISK OF INJURY
INCREASED SIDE EFFECTS OF MEDICATION
• The use of drugs or alcohol may cause unconsciousness with the
possibility of drowning.
• Persons using medications should consult a physician before using
a
fitness system
drowsy, while other medication may affect heart rate, blood pressure,
and circulation.
• Persons taking medications which induce drowsiness, such as
tranquilizers, antihistamines, or anticoagulants should not use the
fitness system
; some medication may cause a user to become
.
Page 2
• The water in the
Water temperatures between 79°F and 104°F (26°C and 40°C) are
considered safe for a healthy adult. The lower water temperatures
are recommended for extended use (exceeding ten minutes) and for
young children. Extended use can cause hyperthermia.
• Pregnant or possibly pregnant women should limit
water temperatures to 85°F (29.5°C) consult a physician prior to using
this product. Failure to do so may result in permanent injury to your
baby.
• Do not use
(36°C) immediately following strenuous exercise.
• Keep all breakables, especially glass, away from this
fitness system
fitness system
should never exceed 104°F (40°C).
fitness system
having water temperatures over 100°F
fitness system
Safety Information
.
• Never insert any objects into any openings.
• Keep all chemicals away from children and pets.
• DO NOT stack chemicals on top of one another.
• NEVER MIX CHEMICALS.
• Sanitizing chemicals must be stored separately from balancing chemicals.
• Before each use, examine this machine for damage or signs of wear.
Do not use this product if found in this condition. Call Customer
Service for repair information.
IMPORTANT FITNESS
AVOIDING THE RISK OF SKIN BURNS
• To reduce the risk of injury, before entering a
should measure the water temperature with an accurate thermometer.
• Test the water with your hand before entering the
sure it’s comfortable.
fitness system
fitness system
the user
to be
SAFETY SIGN
Each ENDLESS POOLS
SIGN in the owner’s package. The sign, which is required as a condition
of Product Listing, should be permanently installed where it is visible to
the users of the
contact your ENDLESS POOLS dealer.
Each ENDLESS POOLS
OPTIONAL TREADMILL SAFETY INFORMATION
fitness system
fitness system
. To obtain additional SAFETY SIGNS,
fitness system
is shipped with a SAFETY
is shipped with a
WARNING:
• Consult a physician before you start an exercise program. Stop
exercising if you feel pain or tightness in your chest, become short of
breath, or feel faint. Contact your doctor before you use the machine
again.
• This machine contains moving parts. Do not wear loose clothing or
jewelry.
• Do not put fingers or other objects into moving parts of the exercise
equipment.
• Use caution while participating in other activities while walking on your
treadmill; such as watching television, reading, etc. These distractions
may cause you to lose balance or stray from walking in the center of
the belt; which may result in serious injury.
WARNING: TO AVOID THE RISK OF INJURY
• Pregnant women should always consult a physician prior to starting
an exercise program.
• NEVER operate this treadmill without reading and completely
understanding the results of any operational change you request from
the controller.
• Treadmill must be installed on a smooth and level surface.
• NEVER leave an operating treadmill unattended.
• NEVER mount or dismount the treadmill while the belt is moving.
• Hydraulic treadmills start at a very low speed and it is unnecessary to
straddle the belt during startup. Simply standing on the belt during this
slow acceleration is the proper way to start using this product.
• Always hold on to a handrail or grab bar while making control
changes.
• Never drop or insert any object into any openings.
• Children must be supervised while using this machine.
• The moving parts and other features of the machine can be
dangerous to children.
Page 3Safety Information
SYSTEM INSTRUCTIONS
The following contains important
strongly encourage you to read and apply them.
DO:
• Follow the
stated in this manual.
• Use only approved accessories and recommended
chemicals and cleaners.
fitness system
DON'T:
• Leave the
in place. Exposure to direct sunlight can cause solar distress of the
shell material.
• Roll or slide the
• Lift or drag the vinyl cover by using the cover lock straps; always lift or
carry the cover by using the handles.
• Attempt to open the electrical control box. There are no user
serviceable parts inside. Opening of the control box by the
system
problem, carefully go through the steps outlined in the Troubleshooting
section. If you are not able to resolve the problem, contact your
authorized ENDLESS POOLS dealer. Many problems can easily be
diagnosed over the telephone by an Authorized Service Technician.
fitness system
fitness system
owner will void the warranty. If you have an operational
FITNESS SYSTEM SHELL
Your
fitness system
will not adhere to your
easily remove most dirt. Most household chemicals are harmful to your
fitness system
agents). Always rinse off any
fresh water.
IMPORTANT:
1. The following products are the ONLY approved cleaning agents
for your
fitness system
Scrub®. The use of alcohol or any other household cleaner other
than those listed to clean the
recommended. DO NOT use any cleaning products containing
abrasives or solvents since they may damage the shell surface,
specifically: Simple Green®, Windex® or spa Mitt. NEVER USE
HARSH CHEMICALS! Damage to the shell by use of harsh
chemicals is not covered under the warranty. Always rinse off any
fitness system
2. Iron and copper in the water can stain the
allowed to go unchecked. Ask your ENDLESS POOLS dealer about
a Stain and Scale Inhibitor to use if your
concentration of dissolved minerals.
3. Keep all cleaners out of the reach of children and use care when
applying.
has an acrylic shell. Stains and dirt generally
’s shell (see below for detailed information on cleaning
shell cleaning agent with fresh water.
fitness system
Care and Maintenance recommendations
exposed to the sun without water or a cover
on its side. This will damage the siding.
fitness system
fitness system
shell: plain water, Brillianize® or Soft
fitness system
information, and we
fitness system
fitness
’s surface. A soft rag should
shell cleaning agent with
shell surface is NOT
fitness system
fitness system
shell if
has a high
SAVE THESE INSTRUCTIONS
SIte requIrementS
Your
fitness system
that can support 205 lbs per square foot.
If a new slab is poured, consult your local electrical codes regarding
grounding and bonding. Local code may require a bonding wire to be
attached to the reinforcing bar or wire mesh that is embedded in the
concrete. If new concrete is being poured, this is the ideal time to install
the conduit for the incoming electrical supply.
Even if a new pad has been poured, it is essential that the system site
is level and planar. There is a simple way to ensure that this is the case.
First, draw a chalk outline of the footprint of your
a six-foot level along and around the footprint of the system. Verify that
there are no gaps between the level and floor. Next pour water inside
of the chalk footprint. Verify that the water does not puddle inside the
footprint.
Should there a be a gap or should the water puddle inside the footprint,
call your ENDLESS POOLS dealer prior to continuing to discuss the
best way to resolve this situation.
INDOOR CONSIDERATIONS
• Local electrical and plumbing codes.
• Ventilation fans and/or dehumidifiers should be provided to handle
the humidity developed by your
wood trim should be water resistant, also.
• Chemicals will vaporize from the water and may cause an odor
and possibly corrosion to certain home hardware. Never store
chemicals inside the
• During the normal use of the
the vessel. Never place on or over any materials, which may be
damaged by this water or the chemicals within the water. Keep
damageable materials far enough away to avoid water damage,
even if the
• Consider and prepare for the unlikely event of rapid drainage. If
placement of the
provide floor drains to accommodate draining, etc. Always leave
room all around the
repairs are necessary.
• Consider and prepare for the unlikely event of removal.
• Do not set
barrier protection underneath.
• The
• The
• Be sure that the location you choose is stable. It must be able
• Do not use the
• The
• Be sure to note any other considerations, such as aesthetics or
fitness system
capable of supplying 230 volts AC power. It must be wired directly
into a grounded circuit with a ground fault circuit interrupter (GFCI).
No other appliances should be on the same circuit.
fitness system
to support the weight of the
water, plus the weight of the occupants. The
weigh up to 19,912 lbs (9,032 kg) when it is filled with water.
the risk of water damage.
fitness system
However, it is compatible with a deck system that is built flush with
the bar top, provided you leave access for service.
privacy concerns, that may affect the safety or enjoyment of using
the
fitness system
must be installed on a smooth and level surface
fitness system
fitness system
fitness system
fitness system
fitness system
fitness system
should have access to a power source
should be close to a source of water.
fitness system
is not designed for in-floor installation.
.
fitness system
cabinet.
fitness system
should lose all its water.
is permanent, you may wish to
for easy access in case
on finished floor without a waterproof
fitness system
above a finished living area due to
. Walls, ceiling and
, water will escape
when it is filled with
fitness system
. Place
may
Page 4
OUTDOOR CONSIDERATIONS
• Local electrical and plumbing codes.
• Consider local codes pertaining to fencing, enclosures, walls,
electrical and plumbing. You will need to ensure that your
system
is an adequate distance from power lines, both above
ground and underground. Your
child proofed.
• View from house for aesthetics and supervisory needs.
• Distance from house for wintertime soaking.
• Nighttime lighting.
• Consider sunlight exposure, views, access, property lines, lighting,
wind direction, shielding, septic tanks, plants, and trees when
determining your location. Chemicals in the
may splash damaging nearby plant life.
• If your
• Area for placement of support equipment where adequate space
• Be sure to note any other considerations, such as aesthetics or
• Provide adequate drainage away from the equipment and
• Location of electrical supply. 230-volt systems require hard wire
• Locations at least 5 ft (1.52 m) from all metal surfaces. A
• Place the
fitness system
positive support is adequate. Call your builder and a structural
engineer.
will be needed to gain access to components for maintenance and
general servicing.
privacy concerns, that may affect the safety or enjoyment of using
the
fitness system
adequate elevation to allow draining by siphon, if should be
required.
installed from the main electrical source, to the sub panel, then to
the
fitness system
fault circuit protected (NOT SUPPLIED) . All electrical wiring must
comply with the national electric code.
system
may be installed within 5 feet of metals surfaces providing
each metal surface is permanently connected by a no. 8 awg (8.4
mm2) copper conductor attached to the bonding wire connector on
the heater provided for this purpose. All installations must comply
with article 680 of the U.S. national electric code and ANSI/NFPA
70-1984.
fitness system
is to be located on a second story, be
.
terminal block. All equipment must be ground
fitness system
on a firm, level surface that will not shift.
will also need to be
fitness system
Site Requirements
fitness
water
fitness
electrIcal requIrementS
IMPORTANT
Your ENDLESS POOLS
give you maximum safety against electrical shock. Connecting the
system
system
risk of fire, and other risks of injuries. Please read and follow the electrical
installation requirements and instructions completely!
230 VOLT PERMANENTLY CONNECTED
ENDLESS POOLS
applicable local electrical codes. All electrical work should be done by an
experienced, licensed electrician. We recommend the use of appropriate
electrical conduit, fittings, and wire for all circuits.
The diagram below illustrates how to wire the
• An electrical subpanel containing two 30 Amp breakers is included with
your
power to the
• The subpanel requires a 60 amp, single phase, 230 volt, four wire service
• Mount the subpanel in the vicinity of the
: Fill the
fitness system
fitness system
with water before turning on the power.
has been carefully designed to
fitness
to an improperly wired circuit will negate many of the
fitness
’s safety features. Improper wiring may also cause electrocution,
fitness system
fitness system
fitness system
. We recommend that this subpanel be used to supply
s must be wired in accordance with all
fitness system
.
model:
(two line, one neutral, one ground). The grounding conductor must not be
less than #6 AWG. Refer to local codes and to NEC 250-122 (table).
than five
fitness system
feet away, in accordance with all local codes. (N.E.C. 680-38 to
, but not closer
41-A-3)
• Open
fitness system
by removing the 4 screws holding the vertical
T-spacer located in the center of the equipment compartment (back
side of
fitness system
). Slide panel towards center, raise panel, pull
bottom out, lower, disconnect light wires on both side and remove,
repeat for other panel.
• Insert power wires into
fitness system
from either side towards the
bottom, you will find a plastic cap attached to wall.
• Once your
fitness system
has been filled with water, turn it on
and test all of the circuit breakers.
IMPORTANT: If breakers immediately trip, verify that the wires are
correctly connected. Breaker should be tested prior to each use. Here’s
how:
1. Push the “TEST” button on each GFCI breaker, and observe it
click OFF.
2. Wait 30 seconds, then push the breaker switch to the OFF (down)
position (to ensure that it has completely disengaged), then push
the breaker switch to the ON (up) position. If you don't wait 30
seconds, the
fitness system
’s power indicator may continue to
blink – try again.
If any of the GFCI breakers fails to operate in this manner, your
system
may have an electrical malfunction, and you may be at risk of
electrical shock. Turn off all circuits and do not use the
fitness system
fitness
until the problem has been corrected by an authorized service agent.
WARNING: Removing, or bypassing any GFCI breaker will result
in an unsafe
fitness system
and will void the
fitness system
’s
warranty.
IMPORTANT: If you ever need to move or relocate your ENDLESS POOLS fitness system, it is essential that you understand and apply these
installation requirements. Your ENDLESS POOLS fitness system has been carefully engineered to provide maximum safety against electric shock.
Remember, connecting the fitness system to an improperly wired circuit will negate many of its safety features.
NOTE: Long wiring runs may require larger-gauge wire than stated.
230 VAC, 48A, 60Hz,
230 VAC, 60 Amp
2-POLE
CIRCUIT BREAKER
(NON GFCI)
60A
MAIN SERVICE
ELECTRICAL
PANEL
#6 AWG WHITE, NEUTRAL
#6 AWG GREEN, GROUND
#6 AWG BLUE, L1
#6 AWG RED, L2
LESS THAN 100 FT.
(FIELD WIRING)
N
L1
L2
GRD
1
2
SUB-PANEL
WITH GFCI
BREAKERS
P/N 304130
30A
30A
L2, HOT, #10 AWG RED
L1, HOT, #10 AWG BLUE
L2, HOT, #10 AWG RED
L1, HOT, #10 AWG BLUE
N, NEUTRAL, #10 AWG WHITE
GROUND, #6 AWG GREEN
MORE THAN 5 FEET
THE SUB-PANEL MUST BE
WITHIN SIGHT OF THE SPA
DO NOT EXCEED 50 FEET
MAIN INPUT
CIRCUIT 1
FITNESS SYSTEM JUNCTION BOX
CIRCUIT 2
GRN
CAUTIONS
USE COPPER CONDUCTORS ONLY.
USE SUPPLY WIRES SUITABLE FOR 75°C/167°F.
DISCONNECT ALL SUPPLY CONNECTIONS BEFORE SERVICING.
CONNECT ONLY TO A CIRCUIT PROTECTED BY A CLASS A
GROUND-FAULT INTERRUPTER.
Electrical Requirements
THESE FITNESS SYSTEMS ARE INTENDED FOR USE WITH GFCI
SUBPANEL PROVIDED.
INCORRECT WIRING WILL DAMAGE CIRCUIT BOARDS.
REFER TO THE WIRING INSTRUCTIONS INCLUDED WITH THE
SUB-PANEL FOR DETAILED WIRING INSTRUCTIONS.
Page 5
EQUIPMENT COMPARTMENT
The illustrations below are to be used as a reference only (your
hydromassage seats (back of the
fitness system
).
fitness system
may look different). The equipment compartment is located behind the
11
6
1. Hydromassage Jets pump
2. Circulation Pump
3. Control Box & Heater
4. Bonding terminal
9
12
7
3
10
4
5
5. Swim Machine Hydraulic Unit
6. Treadmill Hydraulic Unit (Optional)
7. Junction Box
8. UVC Ozone
9. Bluetooth Music (optional)
10. Subwoofer (optional)
11. Wi-Fi (optional)
12. Dual Output Power Supply for External.
8
1
2
lights
DOOR PANEL REMOVE & REPLACE
REMOVE
1. Locate the vertical T-spacer in the center of the equipment compartment (back side of
2. Remove the 4 screws (using a 5/16" socket) holding the T-spacer then remove the T-spacer.
3. Slide panel towards center until panel is no longer behind corner.
4. While holding panel, first pull panel up then pull bottom away from ENDLESS POOLS
Fitness system, lower panel and set on ground.
Disconnect light bar wires from
each side of panel and remove.
5. Repeat for other side.
REPLACE
1. Reconnect light bar wires.
2. Raise panel making sure it goes behind the bar top and rest on bottom frame.
3. Slide panel behind corner.
4. Replace other side panel using steps 1 & 2.
5. Attach T-spacer back in place using 4 screws to complete the installation.
Page 6
fitness system
).
Electrical Requirements
Loading...