Endeavour Tools ET2607 Instruction Manual

1 / 6

ET2607
EGR Valve Activator / Tester
Instruction Manual

2 / 6

Thank you for purchasing this product. Manufactured to a high standard this product will, if

used according to these instructions and properly maintained, give you years of trouble free

performance.

 Safety

WARNING: Risk of Electrocution. Keep hands and fingers away from metal probe clamps and

relay insertion points
CAUTION: Read, understand and follow Safety Rules and

 Operating Instructions in this manual before using this product.
 Do not attempt to repair unit. There are no user serviceable parts.
 Do not expose the unit to extreme temperatures or high humidity
 Do not use the unit if it is wet or damaged
 Do not apply more than the rated current and voltage
 Do not operate with the case open

This symbol, adjacent to another symbol or terminal, indicates the user the user must

refer to the manual for further information.

This symbol, adjacent to a terminal, indicates that, under normal use, hazardous

voltages may be present

Double insulation

General Safety

 WARNING! Ensure Health and Safety, local authority and general workshop practice

regulations are adhered to when using tools.

 DO NOT use this unit if damaged.
 Maintain tools in good and clean condition for best and safest performance.
 Ensure that a vehicle which has been jacked up is adequately supported with axle stands.
 Ensure that all tools are removed from the engine bay upon completion of the job.
 Wear approved eye protection.
 Wear suitable clothing to avoid snagging. DO NOT wear jewelry and tie back long hair.
 Keep children and unauthorised persons away from the work area.
 DO NOT attempt to start engine or move vehicle whilst in gear.