Encyclon 651SP-MWTT Installation, Operation And Maintenance Instructions

6705 14th Avenue • PO Box 1258 •

Kenosha, WI

53143

Ph one 80 0 /7 67 -35 51 • 262/ 654-0032 • Fax [phone] • w ww.ency clon. co m •

sa les@ enc ycl on .c o m

Encyclon Inc.

Cyclonic Filtration Systems

INSTALLATION OPERATION

AND

MAINTENANCE INSTRUCTIONS

FOR

ENCYCLON FILTRATION SYSTEMS

MODEL NO. 651SP-MWTT

SERIAL NO. 20347

INDEX

INDEX 1
PRE-TEXT & WARNINGS 2
DESCRIPTION OF THE FILTER SYSTEM 3 - 4
START-UP PROCEDURE 5
SYSTEM OPERATION 6
TROUBLESHOOTING & MAINTENANCE 7
FILTER CIRCUIT LAYOUT 8
REPAIR PARTS LIST & DRAWING 9 - 10
ELECTRICAL CONTROL – HUBBELL BOOKLET
FILTER PUMP- GUSHER BOOKLET
CLEAN PUMP –WEL-BILT BOOKLET
PRESSURE WASH SECONDARY FILTER

PRE-TEXT & WARNINGS

In order that this ENCYCLON filtration system may give
continuous, satisfactory and safe service it is necessary
that the filter be properly installed, operated and
maintained. Please review this instruction book
thoroughly before installation and operation of the filter.

WARNINGS
Caution is advised when installing this system. The

hoses and piping should never be used for lifting
purposes.

The system should be plugged into a 120V / 1 / 60 Hz
minimum 20 Amp GFCI receptacle.

DO NOT service the system while in operation.
DO NOT place hands in front of pump suction port

while the system is running.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY

RESULT IN SERIOUS PERSONAL SHOCK, INJURY
OR DEATH.

Page 2

ENCYCLON SYSTEM DESCRIPTION

The ENCYCLON filtration system continuously cleans
and filters wash water without using filter media to
provide clean water for your application.

The ENCYCLON hydrocyclone is the core of a
continuous filtration system for water applications. The
cyclone removes metallic and non-metallic particles as
small as 5 microns with a specific gravity greater than

1.5. Through continuous filtration and aeration of the
water by the cyclones, bacteria growth is retarded, thus
preventing the water from becoming rancid.

Page 3