Encore KL53-5026-12, KL53-5026-18, KL53-5032-12, KL53-5032-18, KL53-5526-12 Specifications

PREMIUM PLUMBING PRODUCTS

®

PROJECT NAME: _______________________________________

LOCATION: _____________________________________________

1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701
Phone: [phone], Fax: [phone]

www.encoreplumbing.com • www.componenthardware.com

Encore® Wall Mount Swivel Arm
Pre-Rinse Assembly

KL53-5xxx-xx Series

KL53-5026-12 12” Swivel Arm, 26” Riser,
Support Bracket Optional

KL53-5026-18 18” Swivel Arm, 26” Riser
Support Bracket Optional

KL53-5032-12 12” Swivel Arm, 32” Riser
Support Bracket Optional

KL53-5032-18 18” Swivel Arm, 32” Riser
Support Bracket Optional

KL53-5526-12 12” Swivel Arm, 26” Riser,
Support Bracket Standard

KL53-5526-18 18” Swivel Arm, 26” Riser,
Support Bracket Standard

KL53-5532-12 12” Swivel Arm, 32” Riser,
Support Bracket Standard

KL53-5532-18 18” Swivel Arm, 32” Riser,
Support Bracket Standard

SPECIFIER ITEM NO. ____________________QTY: _________

ENCORE PART NO. _____________________________________

Heavy duty pre-rinse assembly designed to withstand the demands of

commercial operations.

Low-Flow Spray Valve

• 1.6gpm Flat Spray

• Spray head hook holds spray head away from work area when not in use

• Heat resistant, non-marring, impact resistant bumper will not fatigue under

extreme operating temperatures

Encore Premium Hose Feature

• 3-ply nylon reinforced Santoprene

• Interlocking helical coils of stainless steel outer hose shroud protect

inner hose

• Patented stainless steel strain relief spring transfers and distributes load
stress to signicantly improve hose life

• High pressure hydraulic ttings on hose ends tested to 400psi

• Washerless design incorporates temperature resistant O-rings to provide

leak-proof seal on all hose assemblies and hose grips

Kool Grip™ Hose Grip

• Reduces heat transfer to the hand; stays up to 30 degrees cooler than

competitors’ grips

• Ergonomic spray handle ts comfortably in even small hands and is

easy to use

®

inner hose provides maximum durability

Optional

support
bracket

SPECIFICATIONS:

Wall Mount Pre-Rinse Assembly to be Encore KL53 Series

in the following conguration:

____ KL53-5026-12 12” Swivel Arm, 26” Riser, Support Bracket Optional
____ KL53-5026-18 18” Swivel Arm, 32” Riser, Support Bracket Optional
____ KL53-5032-12 12” Swivel Arm, 32” Riser, Support Bracket Optional
____ KL53-5032-18 18” Swivel Arm, 32” Riser, Support Bracket Optional
____ KL53-5526-12 12” Swivel Arm, 26” Riser, Support Bracket Standard
____ KL53-5526-18 18” Swivel Arm, 26” Riser, Support Bracket Standard
____ KL53-5532-12 12” Swivel Arm, 32” Riser, Support Bracket Standard
____ KL53-5532-18 18” Swivel Arm, 32” Riser, Support Bracket Standard

Pre-rinse faucet body to be constructed of polished chrome plated brass with total lead
content less than 0.25% by weighted average. Pre-rinse hose to be constructed of
3-ply nylon reinforced Santoprene® permanently secured with high pressure hydraulic

ttings pressure tested to 400 psi. Hose to be of washerless, leak-proof design,

protected by interlocking helical stainless steel coils for maximum protection and

exibility. Patented stainless steel strain relief spring transfers load stress. Heavy-duty

ergonomic gooseneck spring ensures proper hose position. A patented wall bracket

with compression tting is provided to facilitate installation and give 360º of support.
Heavy gauge swivel arm shall be mated to a solid forged swivel elbow. Heavy duty

swivel arm support allows full swing while providing additional support when pre-rinse

is exposed to severe eld use. Riser to include spray head hook to hold spray head

away from work area when not in use. Spray head to be furnished with 1.6gpm* Water
Saver Spray. Spray assembly to be equipped with Kool Grip™ handle to reduce heat
transfer to hand. Color coded temperature indexes shall meet international standards.

*All ow rates are @ 60psi

Approximate shipping weight - 13 lb
Warranty - 3 years parts

Encore is a registered trademarks of Component Hardware, registered in the US

Specications subject to change without notice © Component Hardware

THE FEDERAL “REDUCTION OF LEAD

IN DRINKING WATER ACT” –

2011 – US SENATE BILL NO. S.3874

NSF/ANSI 61/9, ANNEX G

COMPLIES WITH:

LOW
LEAD PLUMBING

CUS

NSF 61/9

UP CODE

SPC-KL53-5xxx-xx Rev. 07/2015

ADA

Certified To NSF/ANSI 61

Section 9-G

KL53-5xxx-xx Series

Wall Mount Swivel Arm Pre-Rinse Assembly

PREMIUM PLUMBING PRODUCTS

1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701
Phone: [phone], Fax: [phone]

www.encoreplumbing.com • www.componenthardware.com

®

A

Optional

support
bracket

C

B

12-3/8”
314mm

8”

203mm

3-1/2”

89mm

1-1/8” (29mm) holes for backsplash are

recommended to accommodate 1/2” supply nipples.

1/2” NPS Male Inlets
Operating Temperature: 40-180ºF (5-83ºC)
Operating Pressure: 15-125psi

13”

330mm

Model No. A B C

KL53-5026-12 12” (305mm) 29-7/8”(759mm) 29-5/8”(752mm)

KL53-5026-18 18”(457mm) 35-7/8”(911mm) 35-5/8”(905mm)

KL53-5032-12 12” (305mm) 61-7/8”(1572mm) 29-5/8”(752mm)

KL53-5032-18 18”(457mm) 67-7/8”(1724mm) 35-5/8”(905mm)

KL53-5526-12 12” (305mm) 29-7/8”(759mm) 29-5/8”(752mm)

KL53-5526-18 18”(457mm) 35-7/8”(911mm) 35-5/8”(905mm)

KL53-5532-12 12” (305mm) 61-7/8”(1572mm) 29-5/8”(752mm)

KL53-5532-18 18”(457mm) 67-7/8”(1724mm) 35-5/8”(905mm)

Dimensions shown in inches (mm) are for reference only and are subject to change.