Encore ENXTV-X2 User Manual

ENXTV-X2

External TV Tuner Pro

The ENXTV-X2 is an excellent solution in combining a computer and a TV
system without the need for screw driver or software driver. Enhance your
computer to a home theater quality system, just plug-in cables and power
adapter.

The ENXTV-X2 provides high quality, high resolution of up to 1680x1050. Watch
your favorite TV program in high resolution while using your computer at the
same time or watch your favorite TV program in high quality even your computer
is turned-off.

Features:

• Using multiple digital frequency technology up to six resolution modes

• Pure Plug and Play: No Software driver and Utility software installation

required

• Clear and sharp images: Using 3D Motion adaptive de-interlace, digital image
enhancement and digital noise reduction technologies

• Full TV channel supplement: Suitable to receive TV signals by air or CATV
connection. Compatible with PAL, NTSC and SECAM (Depending on the
region you are located or where you buy it)

• Supports PAL, NTSC 3.58/4.43 TV standard with Composite A/V, S-VIDEO
input for Video Camera, DVD Player, Game Consoles and many more.

• PIP function: Watch TV in 3 Window sizes while using your computer

• TV Wall: Supports multi-channel display to preview all channel programs

• Remote Control: Full function Infra red remote control

• All Frequency / All Channel Scan with Channel Memorizing Function

• User friendly OSD

Specifications:

TV format NTSC, PAL, SECAM (Depending on the region you are located)
Resolution 800x600@60,75,85Hz

1024x768@60,75Hz
1280x1024@60Hz
1280x800@60Hz
1440x960@60Hz

1680x1050@60Hz

Certifications FCC, CE and RoHS compliants
RF Antenna 75 ohm impedance, F or PH type
Video input RCA Video, S-Video
Audio input 3.5mm connector PC Audio In L/R
Audio/Video A/V RCA port L/R
RGB input Composite RGB (for VGA loop back cable to PC)
Audio output 3.5mm connector
RGB output D-SUB 15 Pin

System Requirements:

• Display unit CRT, LCD, Plasma or Projector TV/Monitor with VGA connector
(D-Sub 15 pin). A computer is necessary when in PIP mode

• Free-to-air broadcast TV or Cable TV feed

Package includes:

External TV Tuner PRO, IR Remote Control, 2X AAA Batteries for remote
control, Indoor Antenna, User Manual, Audio Cable, 100-240V Power Adapter,
VGA-in Loop back Cable (for PIP)

Note:
ENXTV-X2 is independent from any operating systems. No Utility Software or
Driver installation required and no HDD space is needed.