Encore ENVCWI-G1 User Manual

ENVCWI-G1
M-JPEG Wireless IP Camera
The ENCORE ENVCWI-G1 M-JPEG Wireless IP Camera is a cost-performance effective IP Camera product which allows you to implement multiple applications of home surveillance, security or remote caring on LAN or over the Internet.
With its high power performance design, it provides you the crystal clear M-JPEG video and image at maximum 30 frames per second in VGA, QVGA and QQVGA resolutions.
The ENVCWI-G1 is the right tool you would ever need for applications of home surveillance, security or remote caring on LAN or over the Internet.
Features and Benefits
Surveillance Supported: The camera supports “nightshot mode” to deliver clearer
images in the low lux environment. Enable motion detection and setup automated email alerts and upload FTP for security.
Remote Control Supported: By using a standard Web browser or the bundled Ultra
View software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor the image and take snapshots via the network.
Multiple Platforms Supported: The camera supports multiple network protocols,
including TCP/IP, SMTP e-mail, HTTP, and other Internet related protocols. Therefore, you can use the camera in a mixed operating system environment, such as Windows 2000 and Windows XP.
Multiple Applications Supported: Through the remote access technology, you can
use the cameras to monitor various objects and places for your own purposes. For example, babies at home, patients in the hospital, offices and banks, and more. The camera can capture both still images and video clips, so that you can keep the archives and restore them at any time.
Specification
Image Sensor Sensor 1/4" color CMOS Resolution 640x480 Video Compression M-JPEG Video resolution VGA/QVGA/QQVGA; 30fps max. System Hardware Processor ARM9 base RAM 16MB SDRAM ROM 4MB NOR Flash Power DC 5V Communication LAN 10/100Mbps Fast Ethernet, auto-sensed, Auto-MDIX
WLAN IEEE 802.11g/b compliant wireless LAN interface Protocol support User Interface
LAN One RJ-45 port WLAN External detachable dipole antenna Reset One Reset button LEDs Power LED (amber); Link LED (green) Software OS Support Windows 2000/XP/Vista Browser Internet Explorer 5.0 or above
Apple Safari 2 or above Mozilla Firefox 2.00 or above
Software Ultra View for playback/recording/configuration features Operating Environment Temperature Operation: 5°C ~ 45°C Storage: -15°C ~ 60°C
TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, PPPoE, UPnP
Humidity Operation: 20% ~ 85% non-condensing Storage: 0% ~ 90% non-condensing EMI Regulations FCC Class B, CE Class B
System Requirements
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
Accessing the Camera using Web Browser:
Platform:
Microsoft® Windows® 2000/XP/Vista
 Macintosh OSX  CPU: Intel Pentium III 350MHz or above  RAM: 128MB  Resolution: 800x600 or above  User Interface:
Microsoft® Internet Explorer 5.0 or above
Apple Safari 2 or above
Mozilla Firefox 2.00 or above
Accessing the Camera using Ultra View
Platform: Microsoft® Windows® 2000/XP/Vista.  Hardware Requirement:
1 camera connected: Intel Pentium III 800MHz; 512MB RAM
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM Resolution: 1024x768 or above
NOTE: If you connect multiple cameras to monitor various places simultaneously, you
are recommended to use a computer with higher performance.
Package Contents
One M-JPEG Wireless IP Camera.  One AC Power Adapter.  One External Antenna  One Camera Stand.  One Ethernet Cable (RJ-45 type).  One Installation CD-ROM.  One Quick Installation Guide.
The specifications and picture are subject to change without notice! Please refer to the directions in product package
Loading...