Thank you for choosing Encore Electronics’ Wireless N300/N150 USB Adapter. With just a
steps, you will be enjoying the convenience of wireless networking at the speed that is
few
much faster than the prior Wireless G technology. Place the laptop or desktop computer at
any place you want to avoid the hassle and unsightly view of wires. Moreover,
ENUWI-2XN4x and ENUWI-1XN4x support Wi-Fi Protected Access (WPA/WPA2) data
encryption to help protect your data and privacy.
With Encore Electronics’ Wireless N300/N150
websites, play games, stream video, make phone calls and download files over the
Internet. You also can easily share files with other users and access peripherals, such as
network drives, printers and cameras, in your home or office networks.
1.1 Product Overview
USB Adapter, you can smoothly browse
A. WPS Button
External Detachable Antennas*
B.
Activity LED
C.
USB 2.0 Connector
D.
Antenna Connectors
E.
Note:
* N300Ser
N150Series come with one antenna. The
antennas shown in the picture on the right
are 5dBi antennas. Adapters with other type
of antennas are also available.
ies come with two antennas and
www.encore-usa.com
3
1.2 LED Indicator
The Activity LED will be blinking when:
The adapter is scanning for available wireless networks.
The adapter is transferring and/or receiving data.
1.3 Package Contents
N300 Series (ENUWI-2XN
Wireless N3
External Detachable Antennas* x 2
Quick Installation Guide x 1
Installation CD (User Manual on CD) x 1
N150 Series (ENUWI-1XN
Wireless N1
External Detachable Antenna* x 1
Quick Installation Guide x 1
Installation CD (User Manual on CD) x 1
Note:
The antennas shown on the front cover are 5dBi antennas. Other type of antennas, such
*
as 2dBi and 3dBi antennas, are also available.
4x)
00 USB Adapter x 1
4x)
50 USB Adapter x 1
1.4 System Requirements
Available USB port
®
Operating System: Windows
CD-ROM Drive
7, Windows Vista® or Windows® XP
www.encore-usa.com
4
Chapter 2: Installation
2.1 Hardware Installation
1. Attach the antenna(s) to the wireless adapter.
2. No need to shutdown your computer.
3. Insert the Wireless N300/150 USB Adapter to an available USB
computer.
port on your
www.encore-usa.com
5
2.2 Software Installation
2.2.1 Windows® 7 and Windows Vista
The installation procedures are similar between Windows
®
®
7 and Windows Vista®.
A.
1. Click “Cancel,”
if you see the ‘Foun
window.
d New Hardware Wizard’
B.
Insert the ‘Installation C
on your computer’s configuration, one of the following 3 scenarios will happen (B-1 to B-3).
B-1
D” that comes with the package to the CD-ROM drive. Depending
The ‘EncoreWelcome Screen’ appears
automatically, and then the ‘Quick Setup’
window in Step C will appear.
B-2
Instead of the ‘EncoreWelcome Screen,’ the
‘AutoPlay’ window appears.
Select “Run autorun.exe.”
www.encore-usa.com
6
B-3
If neither the ‘Encore Welcome
Screen’ nor the ‘AutoPlay’ window
appears, type “D:\autorun.exe” in the
“Run” command window in the Start
menu
CD-ROM drive).
If the “Run” command window is not in
the Start menu, go to the Start menu
→ select “Run” in the list of results.
Note: Y
CD-ROM drive number.
(‘D’ is the drive letter of your
→ type “run” in the “search box”
ou can use “Browse” to find the
C.
D.
Click “Software & Driver Installation
” in the ‘Quick Setup’ window.
Click “Yes” to continue,
if you see ‘D
following program to make changes to
this computer?’ in the ‘User Account
Control’ window.
o you want to allow the
www.encore-usa.com
7
E.
F.
G.
Click “Install this driver software
anyway,”
if you see ‘W
publisher of this driver software’ in the ‘Windows Security’ window.
indows can’t verify the
Click “Next” to continue,
when you see the ‘E
LAN Driver – USB Adapter’ window.
NCORE Wireless
1. Save any opened file in other program.
2. Check “Y
computer now.”
3. Click “Finish” to
when you see ‘InstallS
Complete’ in the ‘ENCORE Wireless LAN
Driver – USB Adapter’ window.
es, I want to restart my
restart the computer,
hield Wizard
www.encore-usa.com
8
2.2.2 Windows® XP
A.
1. Click “Cancel,”
if you see the ‘Foun
Wizard’ window when you start Windows
for the first time after installing the
hardware.
d New Hardware
B.
Insert the ‘Installation C
on your computer’s configuration, one of the following 2 scenarios will happen (B-1 or B-2).
B-1
D” that comes with the package to the CD-ROM drive. Depending
The ‘EncoreWelcome Screen’
appears automatically, and then the
‘Quick Setup’ window in Step C will
appear.
B-2
www.encore-usa.com
If the ‘EncoreWelcome Screen’ does
not appear, type “D:\autorun.exe” in
the “Run” command window in the
Start menu
of your CD-ROM drive).
Note: Y
ou can use “Browse” to find the
CD-ROM drive number.
(‘D’ is the drive letter
9
C.
D.
E.
Click “Software & Driver Installation
” in the ‘Quick Setup’ window.
Click “Yes” to continue,
if you see ‘A
permission to continue’ in the ‘User
Account Control’ window.
Click ”Next” to continue,
when you see the ‘E
Manager’ window.
program needs your
NCORE Wireless
www.encore-usa.com
10
F.
G.
Click “Continue Anyway,”
if you see this warning message in the
ardware Installation’ window.
‘H
1. Save any opened file in other program.
2. Check “Y
computer now.”
3. Click “Finish” to
when you see ‘InstallS
Complete’ in the ‘ENCORE Wireless
Manager’ window.
es, I want to restart my
restart the computer,
hield Wizard
www.encore-usa.com
11
2.3 Removing the ENUWI-2XN4x or ENUWI-1XN4x software
In Windows 7® and Windows Vista®
Open the Windows Start menu → go to “Control Panel” → click “Uninstall a
program” under the ‘Programs’ category → select the ‘ENCORE Wireless L A N
Driver - USB Adapter’ → click “Uninstall” → follow the on-screen instructions
In Windows XP®
Open the Windows Start menu → go to the “Encore Wireless Manager”
program group → select “Uninstall” → follow the on-screen instructions
Alternatively, open the Windows St
select “Add or Remove Programs” → select the “ENCORE Wireless Manager -
USB Adapter” → click “Uninstall” → follow the on-screen instructions
art menu → go to “Control Panel” →
2.4 Upgrading the ENUWI-2XN4x or ENUWI-1XN4x software
Upgrades may be available at the Encore Electronics’ website (www.encore-usa.com).
You have to follow the steps below.
1. Write down the SSID (wireless network name)
security key, passphrase or pre-shared key) for any wireless network you want to
save. The saved network profiles will be erased after the upgrade.
2. Download the upgrade from ENUWI-2XN4x
Encore Electronics’ website.
3. Remove the ENUWI-2XN4x or ENUWI-1XN4x
4. Restart your computer.
5. If the upgrade file ends in .zip,
6. Run the upgrade file (ending in .exe) that
7. Follow the on-screen instructions.
you need to extract the .zip file first.
and password (also called network
or ENUWI-1XN4x’s SUPPORT page on
software from your computer.
you downloaded.
www.encore-usa.com
12
Loading...
+ 29 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.