This manual is provided “as is” without warranty of any kind, either express or implied,
including but not limited to the implied warranties or conditions of merchantability or
fitness for a particular purpose. In no event shall we, its directors, officers, employees or
agents be liable for any indirect, special, incident al, or consequ ential damages (includ ing
damages for loss of profits, loss of business, loss of use or data, interr uption of business),
even if we have been advised of the possibility of such damages arising from any defect
or error in this manual or product.
Specifications and information contained in this manual are furnishe d for information use
only, and are subject to change at any time without notice, and should not be construed
as a commitment by us. We assume no responsibility or liability for any errors or
inaccuracies that may appear in this manual, including the products and software
described in it.
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of us.
Product warranty or service will not be extended if:
(1) The product is repaired, modif ied or altered, unless such repair, modification of
alteration is authorized in writing by us.
(2) The serial number of the product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
zWindows, MS-DOS, and DirectX are registered trademarks of Microsoft
Corporation.
zAdobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
The product name and revision number are both printed on the product itself. Manual
revisions are released for each product design represented by the digit bef ore and after
the period of the manual revision number. Manual updates are represented by the third
digit in the manual revision number.
Thank you for purchasing our Fingerprint Security HDD Enclosure. This product is a hard
disk enclosure integrated with fingerprint verification technology to provide maximum
security for your data.
Featuring a USB 2.0 interface, this product offers true plug and play functionality,
providing a fast and efficient data transfer speed. The Fingerprint Security HDD
Enclosure is user-friendly and provides high security for your data backup needs.
Before partitioning a hard disk, make sure to make a backup to all the data stored on the
hard disk. All of the existing data will be erased during the partition process. Use the
software included on the supplied Setup CD to partition a hard disk.
Once you have partitioned a hard disk using the supplied software, the hard disk cannot
be used in any other HDD enclosures, it has to be partition again to work with other HDD
enclosures.
Please handle the hard disk with extra care. Do not shake or drop the hard disk. Keep
the hard disk away from an excessive heat or very close to heaters. Keep this product
away from water or moisture. Do not expose to temperature over 50 ºC.
Before opening the enclosure or inserting a hard disk, make sure you are properly
grounded to avoid the transfer of static electricity between you and the enclosure which
may damage electronic components.
4
ENUHDE-IFP - User Guide
1.1 Features
• Protect Sensitive Data with Fingerprint Access
• Safely Travel with Your Data
• Transport Music, Movies, Photos and Documents with Ease
• Easy to Use with Plug-and-Play Feature
1.2 Requirements
• Operating System: Windows® XP / 2000; Windows Vista®
• Available USB 2.0 port
• 2.5” IDE Hard Drive, up to 750GB
The Fingerprint Security HDD Enclosure works with both USB 1.1 and USB
2.0 ports. However, to achieve optimum performance, a USB 2.0 port is
required.
1.3 Specifications
Interface to P C : USB 2.0, backward compatible wi rh USB 1.X
Interface 2.5” IDE hard drive, up to 750GB
Data Transfer Rate:
LED Indicator: Power on & Data Access
Power Source: USB port Bus power
External Po wer Source:Supported (not include in the package)
Dimensions: 8x13x2 cm (WxHxL)
Supported OS: Windows
Unit Weight: 90 g