Encore ENUBT-C2 DATA SHEET

Bluetooth V1.2 Class 1 & Class 2 USB Dongle

Quick installation Guide

Thank you for using our Bluetooth USB 2.0 Dongle. This installation guide will help you install
Bluetooth USB 2.0 Dongle and connect to the Internet quick & easy. If you need further
configuration, for example: the Peer-to-Peer application, please refer to the User Manual on Manual
& Driver CD-ROM.

■ System Requirements

1. Desktop/ Laptop with USB port and CD-ROM driver

2. Operating System: Windows 98 SE/ME/2000/XP/Mac OS X v10.2 or Higher

■ Quick Installation for Windows 98 SE/ME/XP/2000

Note: The screens showed below are from Windows XP. For other Windows system, the steps are

the same, but the screens shown will be a little different.

Software Installation

■

1. Insert the “Manual & Driver CD-ROM” into the CD-ROM driver of your PC, and you’ll
see the software installation window as shown below..

2. Click “Setup Driver&Tools”, and choose the “default” item through the installation
process.

3. Reboot your PC

 Plugging Bluetooth USB Dongle

1. Plug Bluetooth USB Dongle, the USB stick, into your PC, You’ll see the following
screen.

2. . Press click “OK”

The local device's name,
which will be shown to
other Bluetooth enabled

The device's type of your local
computer (i.e., Desktop,
Laptop or Server).

6. After successful installation, you’ll see the new icon appears in the Icon Tray.

Bluetooth

If the installation fail, Please refer to the User Manual in “Manual & Driver

CD-ROM” for solution.