Encore ENL832-TX-EN User Manual

ENL832-TX-EN

Encore 32 bit LAN PCI Card

Encore ENL832-TX-EN is an internal Auto switching 10/100 Mbps Fast Ethernet
PCI interface LAN Card. ENL832-X-EN uses advanced IC Plus single-chip Fast
Ethernet solution with complete set of industry standard features for high-speed
Internet access. ENL832-TX-EN offers easy installation and cost-effective
connection for SOHO and residential users.

Features:

‧ 32-bit PCI V2.2 and ACPI Rev. 1.0 compliant
‧ Plug and play compatible for easy installation and configuration
‧ Supports 10Mbps and 100Mbps operation
‧ Friendly GUI configuration and management software
‧ Supports Half/Full duplex capability

Specifications:

Data Transfer Rates

• 10 Mbps and 100 Mbps With two 2K byte independent receive and
transmit FIFO’s

Protocol

• IEEE 802.3 10 Base-T

• IEEE 802.3u 1000 Base-TX

• IEEE 802.3x Full Duplex Flow Control

Power Consumption

• 1.5 Watts

Interface

• PCI Specification 2.2 Compliant

Connector

• RJ-45 X 1

Dimensions (Approximate)

• 119 mm (L) x 35.8 mm (W) x 16 mm (H)

Net Weight (Approximate)

• 50 grams

Operating Temperature

• 0°C ~ 80°C

Supported Operating Systems

• Windows® 98SE, ME, 2000, XP, NT 4.0,

• Linux

• MAC 10.x

• Novell

• SCO 5

• Solaris

• Unixware 7

Minimum System Requirements

• Pentium Compatible Processor 200 MHz and above, 32 MB RAM and above, 30
MB available HDD space, CDROM Drive (fro driver installation) and 1 availabel
PCI slot

Regulations

• FCC Part 15 Class B, CE