Encore ENPSWI-2012 - QUICK INSTALLATION GUIDE V1.2, 802.11GB WIRELESS PRINT SERVER Quick Installation Manual

802.11g/b Wireless Print Server

with 2-USB2.0 and 1-Parallel Port

Quick Installation Guide

V1.2

1

Before you start, you should prepare the following items:

z Windows-based computer with print server setup CD
z Printer
z Printer cable
z One 802.11b/g Access Point (optional)

Wired Network with Print Server:

Printer

Print Server

Computer Computer Computer

HUB

Wireless Network with Print Server:

Infrastructure mode (Access Point):

Printer

Print Server

Computer Computer Computer

HUBAccess Point

Laptop Laptop

2

Ad-Hoc mode (Peer to Peer):

Printer

Print Server

Laptop Laptop

Hardware Installation:

1. Turn off the printer’s power.

2. Connect the print server to your printer with the supplied printer cable.

3. Turn the printer’s power on.

4. Plug the AC power adapter into the power connector on the print server.

5. Wait 10 seconds as part of the print server’s Power On Self Test (POST).

Software Installation:

1. To enable network communication with print server, your computer must have a proper
IP address, e.g. 192.168.0.100 (the print server’s default IP is 192.168.0.10)

2. Insert the setup CD into your CD-drive. The autorun program will be started.

3. Choose Wizard to install the print server and configure the connected printer.

3

4. Click Next, the wizard will automatically discover the print server.

5. From the Select A Print Server screen, select the print server port that you want to

4