NES-600P
Installation guide
1. Hardware Overview
1-1. Network Side (NES-600PT)
Interface:
Ethernet port: RJ45
Extender port: RJ45
DC Input: DC Jack
Green LED: Ethernet port communication status
Orang LED: Extender port communication status
1-2. Camera Side (NES-600PR)
Interface:
Ethernet port: RJ45
Extender port: RJ45
DC Input: DC Jack
Green LED: Ethernet port communication status
Orang LED: Extender port communication status
2. Configuration Examples
2-1. PoE Powered solution:
Install steps:
1. First, insert one end of an Ethernet cable to IP Camera and insert the other end
into Ethernet port of NES-600PR.
2. Connect an Ethernet cable between the NES-600PT and the NES-600PR.
3. Insert one end of an Ethernet cable to into Ethernet port of NES-600PT and
insert the other end into your POE Ethernet Switch or POE Injector.
2-2. External power supply with non-PoE switch solution:
Install steps:
1. First, insert one end of an Ethernet cable to IP Camera and insert the other end
into Ethernet port of NES-600PR.
2. Connect a Ethernet cable between the NES-600PT and the NES-600PR.
3. Insert one end of an Ethernet cable to into Ethernet port of NES-600PT and insert
the other end into your Ethernet Switch.
4. Finally, connect the power adapter’s cord into the DC input of the NES-600PT and
plug AC plug to power source (such as a wall socket or power strip).
2-4. Camera side local power solution:
Install steps:
1. First, insert one end of an Ethernet cable to IP Camera and insert the other end
into Ethernet port of NES-600PR.
2. Connect an Ethernet cable between the NES-600T and the NES-600PR.
3. Insert one end of an Ethernet cable to into Ethernet port of NES-600PT and insert
the other end into your Ethernet Switch.
4. Connect the power adapter’s cord into the DC input of the NES-600PT and plug
AC plug to power source (such as a wall socket or power strip).
5. Finally, connect the power adapter’s cord into the DC input of the NES-600PR and
plug AC plug to power source (such as a wall socket or power strip).
Loading...