PR36-Elite Bookshelf Rack
Thank you for choosing Enclume!
Enclume racks are the ultimate quality,
design, strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR
RACK
If you need help, please call 1-877-ENCLUME
24 Colwell Street, Port Hadlock, WA 98339
Phone 360-385-6100 Fax 360-385-6156
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
2 –5/16” x ¾” Button Head Screws
2 – 5/16 Hex Nuts
1 – 3/16 Allen Wrench
4 – 2” Lag Screw
4 – “L” Shaped Grid Brackets
Toggle Kit
Components included:
1 – Rack Body
2 – Arms
1 – Grid
6 – Angled Pot Hooks
6 – Straight Pot Hooks
See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS
Enclume Design Products
www.enclume.com
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Place the rack body on a flat surface. Begin by attaching one “L” shaped grid bracket to the inside front of the body along with
the one of the arms on the outside, front using the 5/16” x ¾” Button Head screws from the outside. Secure with the 5/16”
Hex Nuts on the inside. Repeat for second grid bracket and arm.
2) We recommend that you anchor your rack into the solid wood. Carefully measure the area where the rack is to be hung and
install the rack with the 2” lag screws directly into the wood. If it is not convenient to hang your rack directly into wood joists
you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand manufacturer recommendations for
weight limits included in the instructions in the Toggler kit.
3) After the rack has been mounted onto the wall, place the grid into it with the long wires facing up. Push the grid against the back
of the rack so there is clearance for the pot hooks t o ha ng along the front bar.
It is important that your rack is assembled correctly. If the unit is assembled or used
WARNING
incorrectly, it could become unstable and collapse, possibly causing injury.
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20
days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by
Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
Loading...