SIGNATURE SERIES DOUBLE WINE RACK
SWSR4
If you need assistance, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Enclosed you will find everything needed for the assembly and use of your wine rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4 –3/8" x 1" Button Head Screws
6 – 2” Lag Screw
1 – 7/32” Allen Wrench
2 - Toggle Kit (Drywall anchors)
Components included:
2 – Rectangular Base with Wood Front
2 – Arms
6 – Grid Brackets
2 – Wine Bottle Grids
2 – Glass Holders
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Remove one of the 3/8" x 1" button head screws from one side of the front of each of the rectangular
bases, then stand on edges. Place one of the arms in front of the holes on both rectangles and using the
button head screw, attach the arm to the front of each rectangle carefully screwing through the steel of the
end of the rack and into the wood. Repeat on the other side.
2) We recommend that you anchor your rack into the solid wood of wall studs. Carefully measure the area
where the rack is to be hung and install the lag screw directly into the wood studs. If it is not convenient to
hang your rack directly into wood you may use the included DRYWALL anchors included in the toggle pack
enclosed with your rack. See Toggler® brand manufacturer recommendations for weight limits included in
the instructions in the Toggle kit.
3) After the rack has been mounted onto the wall, place the glass holder inside the lower rectangle so that it
hooks over the ends of the rack. Place the grid brackets perpendicular to the rack inserting into the preexisting holes and placing the other end over the back of the rack on each rectangle. Place the wine bottle
holders on the grid brackets.
WARNING: It is important that your wine rack is assembled correctly. If the unit is assembled or used incorrectly, it could become unstable and
collapse, possibly causing injury.
LIMITED WARRANTY: This product is warranted to be free of material defects, other than that from normal use, for a period of five years from the
date of purchase. Customer's exclusive remedy shall be the repair or replacement of the defective product and shall be subject to the following
conditions: (1) notice of any defect is received by Enclume within the warranty period and (2) customer returns the defective product to Enclume
Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20 days following a return authorization number (which may be
obtained by telephoning the number at the top of this instructions) being provided to the customer by Enclume. There are no other warranties,
expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY
DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
Loading...