Enclume EN1310 Installation & Assembly

Enclume Décor Cottage Circle Rack

DR14

Enclume Décor racks are the ultimate in

quality, design, strength and function.

Congratulations for owning one of the finest

storage racks made.

WARNING:

READ ALL OF THE INSTRUCTIONS

BEFORE ASSEMBLING AND USING

Enclosed you will find everything needed for the assembly
and use of your pot rack. Two people make assembly
and installation easier. The parts and hardware included are:

Hardware included:

2 – Ceiling Screw Hooks (small)
6 – Straight Pot Hooks – EPHS
Toggle Kit for installation in sheetrock

Components included:

1 – Circular Rack Body
2 – Hanging Arms
1 – Grid

YOUR RACK.

ASSEMBLY AND INSTALLATION INSTRUCTIONS

1) Lay the rack body on a flat surface.

2) Locate the holes in the rack body and insert the “U” shaped ends of each hanger from the outside of the rack body. The inside

ends of the hanger will now serve as your grid support.

3) Place the grid into the rack body on the hangers with the 4 full squares resting on each hanger.

4) You are now ready to hang your rack.

5) We recommend that you anchor your rack into the solid wood of ceiling joists or beams. Carefully measure the area where the

rack is to be hung and install the ceiling screw hooks directly into the wood joists. If it is not convenient to hang your rack
directly into wood joists you may use the new-technology DRYWALL anchor s enclosed with your rack. The steel anchors are
very strong and when installed in drywall will hold 200 lbs. each. Two anchors hold about 400 lbs. Follow the instructions in the
Toggler kit.

6) Once the ceiling screw hook or Toggler is installed, the rack can then be hung with both hangers on the single ceiling screw hook

or Toggler.

7) As an alternative, if you desire two hanging points, you may locate and install both ceiling screw hooks or Togglers and place one

hanging arm on each.

8) All of our hammered steel racks are finished with an industrial acrylic coating designed to give years of protection to the rack.

Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge"
like wax product

WARNING

It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.

Limited Warranty:This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid
within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the
customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES

'

If you need help, please call 1-877-ENCLUME

Enclume Design Products, Inc.

24 Colwell Street, Port Hadlock, WA. 98339

Phone [phone] • Fax [phone]

www.enclume.com