Mounting Options:
Mounting Options:
Mounting Options:Mounting Options:
Each Panel has 4 mounting holes for wall mounting. Please Note:
hardware is not included. You can use standard wall anchoring hardware
found at hardware stores and Home Improvement Centers. Please consult
one of their hardware associates for the proper mounting hardware based
on your wall construction. In addition we also offer our Track System when
mounting 3 or more Light Panels item No. 3116.
Please Note: Mounting
Please Note:Please Note:
UV Light Panel #3605
USER’S GUIDE
Updated!
Updated!
Updated!Updated!
Ultraviolet LED lights create dramatic colors on the myriad UV reactive
strands as they reflect in the mirrored background. Strands are
different textures: bumpy beads, smooth plastic and ribbed fabric.
Great visual and tactile effects. Wall panel can be used with our Track
System (#3116), mounted directly on a wall or placed in its own stand
(sold separately below). Size: 15"L x 13"W x 2½"H. Requires 4 C
Batteries. Weight: 3 ¾ Lbs.
1. UV Light Panel requires 4 C batteries (not included). Use Alkaline
batteries only (e.g. Duracell or Energizer brand). Do not use
rechargeable batteries or any other type of batteries because they
supply lower voltage and the unit will not perform properly. The
battery compartments are located under the magnetically held
compartment on the top of the panel. To access the
compartments lift up the access door and then remove the Phillips
Head screws from each battery compartment cover. Install the C
batteries into each holder. When installing new batteries, always
be careful to observe battery polarity. Replace battery covers and
screws. Never mix old and new batteries together or different
brands or types together. (See Photo).
2. Push the ON/OFF button in to turn the panel’s lights ON.
TTTTroubleshooting:
roubleshooting:
roubleshooting:roubleshooting:
Problem:
Problem: UV Light Panel’s lights do not work.
Problem:Problem:
Action #1:
Action #1: Make sure the ON/OFF push button is turned ON.
Action #1: Action #1:
Act
Action #2
ion #2:::: Check the Batteries for strength and for proper battery
ActAct
ion #2ion #2
polarity. Replace if weak or dead.
Care of the Unit:
Care of the Unit:
Care of the Unit:Care of the Unit:
The UV Light Panel can be wiped clean with any household multipurpose, non-abrasive cleaner and disinfectant. We recommend
Simple Green, which is a non-toxic biodegradable all-purpose cleaner.
Do not use
Do not use abrasive cleaners, as they will scratch the surface of the
Do not useDo not use
unit.
Do not submerge
Do not submerge the unit, as it will damage the electrical
Do not submergeDo not submerge
components.
Rev
Rev 5555/3
/3/17
/3/3
/17
/17/17
Rev Rev
Loading...