Enabling Devices The Twinkler 76 User Manual

The Twinkler #76

User’s Guide

For Technical Support:

For Technical Support:

For Technical Support:For Technical Support:

Call our Technical Service Department

Monday through Friday, 9 a.m. to 5 p.m. (EST)

1-800-832-8697

[e-mail]

50 Broadway

Hawthorne, NY 10532

Tel. [phone] / Fax [phone]

Toll Free 800.832.8697

www.enablingdevices.com

Sparkles fly!

Sparkles fly!

Sparkles fly! Sparkles fly!
Pressing the yellow textured switch on the front of the device
will send the sparkles flying around the dome while
simultaneously playing music and lighting up. A fun and
wonderful way to provide visual and tactile awareness. It can
also be activated with an external capability switch (not
included). Size: 13½"L x 10½"W. Requires 6 C Batteries.
Weight: 3 lbs.

OPERATION:

OPERATION:

OPERATION:OPERATION:

1.

1. The Twinkler requires six “C” size batteries. Alkaline batteries (i.e.

1.1.

Duracell) are recommended because they last longer. Do not use
rechargeable batteries because they supply lower voltage and the
unit may not perform as well.

2.

2. The battery compartment is located on the underside of the unit. To

2.2.

access the compartment, simply remove the Velcro battery cover.
Install the batteries paying careful attention to proper polarity.
Replace the battery cover.

3.

3. To activate the toy, simply press the textured yellow switch on the

3.3.

front of the device.

4.

4. Enjoy the effects as the sequins flutter all about accompanied by

4.4.

music, light and vibration.

5.

5. The toy will stop once you release pressure on the textured yellow

5.5.

switch.

6.

6. You can also activate this toy with your own external capability

6.6.

switch. Simply plug your switch into the jack on the side of the toy.
The Twinkler accepts 1/8" plugs. Make sure that the connection
between the jack and the plug is tight/secure. There should be no
gaps.

7.

7. Again, the toy will stop once you release pressure on your external

7.7.

capability switch.

TROUBLESHOOTING:

TROUBLESHOOTING:

TROUBLESHOOTING:TROUBLESHOOTING:

• There are three sets of two batteries. The

There are three sets of two batteries. The two

There are three sets of two batteries. The There are three sets of two batteries. The
and middle

and middle (when you have the yellow plat

and middleand middle

(when you have the yellow plate switch facing you

(when you have the yellow plat(when you have the yellow plat

two set

set ssss on the left

setset

on the left

on the lefton the left

two two

e switch facing you

e switch facing you e switch facing you

and turn the unit up) controls the music and light

and turn the unit up) controls the music and lightssss, and the other

and turn the unit up) controls the music and lightand turn the unit up) controls the music and light
set (right) control the fluttering of the sequins an d the vibration.

set (right) control the fluttering of the sequins an d the vibration.

set (right) control the fluttering of the sequins an d the vibration.set (right) control the fluttering of the sequins an d the vibration.

Problem:

Problem: The music and/or the lights are not functioning, as they should.

Problem:Problem:
Action:

Action: One or both of the batteries that control the music and light is

Action:Action:
weak, dead or installed incorrectly. Check these two batteries and
replace them if need be, paying close attention to proper battery polarity.
Problem:

Problem: The sequins are not fluttering and/or there is no vibration.

Problem: Problem:
Action:

Action: One or more of the batteries that controls the sequins and

Action:Action:
vibration is weak, dead or installed incorrectly. Check these four
batteries and replace them if need be, paying close attention to proper
battery polarity.
Problem:

Problem: The toy does not turn off. It is running constantly.

Problem: Problem:
Action:

Action: Make sure that you do not have an adapter plugged into the jack

Action:Action:
on the side of the unit alone (if applicable). When using the toy with an
external capability switch, make sure that the connection between the
switch and toy is tight. There should be NO GAPS. If you are not using an
external switch, make sure that there is nothing near the toy which may
be pushing into the yellow button, therefore holding it in an “On” position.
CARE OF THE UNIT:

CARE OF THE UNIT:

CARE OF THE UNIT:CARE OF THE UNIT:
The Twinkler can be wiped clean with any household multi-purpose
cleaner and disinfectant.

• Do not submerge

Do not submerge the unit, as this will damage the contents and the

Do not submergeDo not submerge
electrical components.

• Do not use abrasive cleaners,

Do not use abrasive cleaners, as they will scratch the surface of

Do not use abrasive cleaners,Do not use abrasive cleaners,
the unit.

, and the other

, and the other , and the other

Rev

Rev 1/

1/17/17

17/17

Rev Rev

1/1/

17/1717/17