Gumball Switch on Easy Flex Mount
#1015
USER’S GUIDE
We’ve added our popular Gumball switch to our Easy Flex Mount.
Bend the flexible arm and position the switch anywhere. Easily
clamps to any wheelchair, tray, tabletop, highchair or stroller.
Size: 20"L. Weight: 1 lb.
Operation:
1. Attach the clamp to your mounting surface by first turning the
clamp adjusting knob clockwise to loosen. Turn counter
clock wise to tighten, do not over tighten or you will damage
clamp. Once the Flex Arm is mounted you will want to adjust
position of the arm for the best placement. Gently bend the
arm to the desired position. To fine tune your placement of
the switch.
2. Plug the switch into the jack on your switch-adapted
toy/device.
3. If it is necessary for you to use an adapter, make sure that
you use a MONO adapter, not a STEREO adapter.
4. Make sure that the connection between the switch and your
toy/device is plugged in all the way. There should be no
gaps.
5. Simply press anywhere on the switch’s top to activate your
toy/device.
6. The toy/device will only remain activated while switch
continues to be actuated. Once you release the switch, the
toy/device will turn off.
Troubleshooting:
Problem: The switch does not activate your toy/device.
Action #1: Make sure that the connection between the switch
and your toy/device is plugged in all the way. There should be
no gaps. This is a common error and an easy fix.
Action #2: Try a different switch with your toy/device to rule out
the toy/device as the source of the problem.
Action #3: Try a different adapter (if applicable) to rule this out
as the source of the problem.
Care of Unit:
The Gumball switch on Easy Flex Mount can be wiped clean
with any household multi-purpose cleaner and disinfectant. We
recommend Simple Green, which is a non toxic biodegradable
all-purpose cleaner.
Do not submerge the unit, as it will damage the contents and
the electrical components.
Do not use abrasive cleaners, as they will scratch the surface
of the unit.
Rev 2/27/17
Loading...