Page 1
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
customer_support@enablingdevices.com
Bouncy Bunny- #3816
USER’S GUIDE
385 Warburton Avenue
Hastings on Hudson, NY 10706
Tel. 914.478.0960 / Fax 914.478.7030
www.enablingdevices.com
Page 2
Hop, hop, hop!
Attach your capability switch or squeeze his left paw and Bounce
Bunny will sing the Hop Hop song for you and hop in place. He is just
adorable to play with. Size: 9"L x 4"W x 11"H. Requires 3 AA
Batteries.
Operation:
1. Bouncy Bunny requires 3 AA batteries (Not included) to operate.
Use alkaline batteries only (e.g. Duracell or Energizer brand). Do
not use rechargeable batteries or any other type of batteries
because they supply lower voltage and the unit will not perform
properly. Never mix old and new batteries together or different
brands or types together.
2. The battery compartment is located in Bouncy Bunny’s back. Open
the Velcro flap, remove the battery cover and install 3AA batteries
paying close attention to proper battery polarity.
3. Replace the battery compartment cover. Turn the ON/OFF switch
to ON, which is located the above the battery compartment.
4. Connect Bouncy Bunny to any external capability switch (not
included) via the jack located at the end of his cord. Bouncy Bunny
is equipped with a 1/8" jack for use with external capability
switches with a 1/8" plug. Make sure you have a tight connection.
There should be no gaps.
5. Use any capability switch or squeeze his left paw to get Bounce
Bunny hopping and singing. At the end of each verse the Bounce
Bunny will hop in place. The song lasts for 45 Seconds but you
can stop it any time by hitting your switch or squeezing his paw.
The song always returns to the beginning when you turn him off.
6. When you are finished using Bouncy Bunny turn his ON/OFF
switch to the OFF position.
Troubleshooting:
Problem: Bouncy Bunny does not function correctly.
Action #1: Replace the batteries paying close attention to proper
battery polarity.
Action #2: Make sure that the connection between the external
capability switch and the jack is TIGHT. There should be NO gaps.
Action #3: Try your switch with another switch operated toy/device in
an effort to rule out your switch as the source of the problems.
Care of Unit:
If you will not be using Bouncy Bunny for an extended amount of
time, we recommend removing the batteries.
Do not submerge the unit in water, as it will damage the electrical
components. Bouncy Bunny is surface washable only.
Rev 8/11/09
Loading...