Page 1
Vibrating Light with Music #459
USER’S GUIDE
Page 2
Now with bright LED!
We’ve updated our best selling vibrating light with the latest
technology in illumination. This fun light encourages individuals to
reach out. The textured plate light sup and vibrates when pressed,
increasing visual, auditory and tactile experiences. Also available with
music, lights and vibration. Both versions can be used as a switch. Can
be placed on a lapboard or mounted on a wall (mounting hardware
included). Size: 9" L x 2" H x 12"W. Requires: 4 AA Batteries.
Operation:
1. The Vibrating Light with Music requires 4AA batteries (Not
included). Use alkaline batteries only (e.g. Duracell or Energizer
brand). Do not use rechargeable batteries or any other type of
batteries because they supply lower voltage and the unit will not
perform properly. Never mix old and new batteries together or
different brands or types together.
2. The battery compartments are located on the back of the unit. To
remove the battery compartment covers, unscrew the small Phillips
Head screws, and then lift the covers off. Install new batteries,
being careful to observe proper (+) & (-) battery polarity. Replace
covers and screws. Turn the On/Off switch to On.
3. Pressing on the textured plate will illuminate the plate along with
vibration and music for as long as the plate is depressed.
4. The Vibrating Light with Music can also be used as a switch by
connecting one end of the included 1/8" to 1/8" male cord into the
jack on the Vibrating Light with Music, and the other end into your
switch adapted toy or device. The toy/device will activate as long
as the textured plate is depressed.
Please Note: The vibration, light and music will also activate while
your toy/device is being activated.
Troubleshooting:
Problem: The Vibrating Light with Music does not work.
Action #1: Check all batteries for proper (+) & (-) battery polarity.
Action #2: Replace the batteries with fresh new batteries. Never mix
different brands or old and new batteries.
Care of Unit:
The Vibrating Light with Music can be wiped clean with any
household multi-purpose cleaner and disinfectant. We recommend
Simple Green, which is a non toxic biodegradable all-purpose cleaner.
When finished playing with the Vibrating Light with Music turn the
ON/OFF switch to OFF to help prevent battery drain. For prolonged
storage we recommend removing the AA batteries.
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev 11/29/10
Loading...