Page 1
Vibrophonic Light #4550
USER’S GUIDE
Page 2
Lights, Music, Vibration!
This is a great cause and effect toy! Just activate the large 7" textured
orange switch plate to experience bright lights illuminating, and soft
vibration while listening to six high fidelity songs, from classical to
rock. Each song is about 45-50 seconds long. It has adjustable volume
control and the vibration can be turned off if desired. Size: 10" L x
10"W x 2 3/4"H. Requires 6 AA Batteries.
Operation:
1. The Vibrophonic Light requires 6AA batteries. Use alkaline
batteries only (e.g. Duracell or Energizer brand). Do not use
rechargeable batteries or any other type of batteries because they
supply lower voltage and the unit will not perform properly. Never
mix old and new batteries together or different brands or types
together.
2. To install the batteries turn the unit over, using a Philips Head
screwdriver remove screws and covers. Install AA batteries
following proper (+) & (-) battery placement. Replace battery
covers and screws. Turn the Vibrophonic Light’s On/Off/Volume
switch ON and adjust the volume to an auditable level.
3. Pressing down on the large orange switch plate will illuminate the
plate along with the accompanying upbeat music. Each time you
press the switch the music will change. The light will stay on as
long as the plate is depressed, the music will play while the plate is
depressed but will stop when it reaches the end of the song. To
start playing the next song, release the plate and press down again.
Once the switch is released the Vibrophonic Light will stop
4. There is also a Vibration feature, to feel vibration when the orange
switch plate is activated set the Vibration On/Off switch located on
the bottom of the unit to On. Turn Off when not in use.
6. When you are finished using the Vibrophonic Light turn the
On/Off/Volume switch to Off, this will prevent false activation and
help conserve battery power. Leaving it set to On will drain the
batteries out completely in a short amount of time.
Troubleshooting:
Problem: The Vibrophonic Light does not work when my switch is
activated.
Action #1: Make sure that you press all connections firmly together.
Any gaps may interrupt electrical connection.
Action #2: Make sure batteries are fresh.
Problem: The Vibrophonic Light works intermittently.
Action: Replace the batteries in the Vibrophonic Light.
Care of Unit:
The Vibrophonic Light can be wiped clean with any mild household
multi-purpose, non-abrasive cleaner and disinfectant. We recommend
Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Do not submerge the unit in any fluids, as it will damage the contents
and the electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev 12/7/09
Loading...