Enabling Devices 3710 User Manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
customer_support@enablingdevices.com
Small Cassette Player - #3710
USER’S GUIDE
385 Warburton Avenue
Hastings-on-Hudson, NY 10706
Tel. 914.478.0960 / Fax 914.478.7030
www.enablingdevices.com
Plays real cassettes! This compact and functional cassette player allows children to listen to their favorite cassette with ease by pressing their capability switch. It has two play modes so children can listen with adjustable headphones or through the built in speaker. Has play, stop, and fast forward buttons, volume control and adjustable strap for carrying. Great for increasing fine motor and auditory skills. Size: 6"L x 5½"W. Requires 2 AA Batteries.
Operation:
1. The Small Cassette Player requires 2 “AA” batteries (Not included) to
operate. Please Note: Alkaline batteries are required (e.g. Duracell or Energizer brand) Do not use rechargeable or heavy duty batteries as they will not work with this device. Never mix old and new batteries together.
2. Turn the unit over to reveal the battery compartment. Slide the battery
compartment cover off. Observing proper (+) & (-) battery polarity, install two AA size batteries into the holder. Replace the battery compartment cover.
Inserting the Cassette Tape:
3. Before opening the cover ensure that all functions are switched OFF. Open
the cassette door by gently pulling on the upper right edge or the door and open completely without force. Insert the tape with the tape side up and the side you want to play facing towards you. Close the cassette door by gently pushing down on it. If the door does not close, check that the tape is correctly inserted and be careful not to apply force.
How to use the Cassette Player:
4. Plug in any capability switch with a 1/8" plug into the Cassette Player’s
cord jack. Make sure the AVR switch is set to OFF. Press the PLAY button and then activate your switch, While activating your switch, adjust the Volume to the level desired using the control dial. Once you release your switch the Cassette Player will stop playing. You will need to maintain activation of your switch to keep the tape playing or use a switch with a Latch/Timer feature such as our No. 718-X or using a switch modifier like our No.605
Listening:
5. To listen to the Cassette tapes, either use the integrated speaker in the Cassette Player or purchase a set of stereo Headphones... To use the headerphones, connect the headphones by inserting the Headphone’s plug into the jack marked headphones.
6. For additional functions or features please check the original manufactures user’s guide. Please Note: The Automatic Voice-Activated Recording
function has been disabled due to switch adaption.
Troubleshooting:
Problem: The tape player does not function.
Actions:
Check batteries for polarity placement and be sure to use fresh batteries.
Be sure the Play button is depressed.
Be sure the VOLUME control button is adjusted to an audible listening
level.
Check that the tape is not jammed or stuck.
Try your switch with another device you know works to rule out the switch
as the source of the problem.
Care of Unit:
The Small Cassette Player can be wiped clean with any mild household multi­purpose cleaner and disinfectant. We recommend Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Do not submerge the unit, as it will damage the contents and the electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Rev 8/14/08
Loading...