Enabling Devices 1556 User Manual

5. Installi ng y our i
Installi ng y our iInstalli ng y our i
Installi ng y our iPad:
Pad: Pad:
Pad: Now that you have your mounting arm assembled and adjusted you can now place your iPad into the holder. Slip one side of your iPad under the bungee cord holder, making sure you have all your ports lined up with the holder. Adjust and secure with the second bungee cord holder (See Fig. 4). This mount will hold an iPad 1 or 2 with or without a case. (We recommend our case Item No.1555 for the iPad 1).
Fig.4
Video:
Video: Video:
Video: For more detail ed setup inform ation pl ease vi ew our setu p vi deo at:
For more detailed s etup information pl ease vi ew our setup vi deo at: For more detailed s etup information pl ease vi ew our setup vi deo at:
For more detailed s etup information pl ease vi ew our setup vi deo at:
www.enablingdevices.com and type in the Item no. 1556 in our search box and
then click on the results to take you to the video.
Caution:
Caution:Caution:
Caution: Do n ot over tighten the adjusting knobs, or try to move or adjus t th e m
Do n ot over tighten the adjusting knobs, or try to move or adjus t th e mDo n ot over tighten the adjusting knobs, or try to move or adjus t th e m
Do n ot over tighten the adjusting knobs, or try to move or adjus t th e m ounting
ount ing ounting
ount ing
syst em a fter you have tightened th e adjusting kno bs. Doi ng s o can damag e
syst em a fter you have tightened th e adjusting kno bs. Doi ng s o can damag e syst em a fter you have tightened th e adjusting kno bs. Doi ng s o can damag e
syst em a fter you have tightened th e adjusting kno bs. Doi ng s o can damag e the Moun ting System and void your warranty.
the Moun ting System and void your warranty.the Moun ting System and void your warranty.
the Moun ting System and void your warranty.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit: The Mounting System can be wiped clean with any mild household multi-purpose cleaner and disinfectant. Do not use ab
Do not use abDo not use ab
Do not use abrasive cl eaners
rasive c leanersrasive c leaners
rasive c leaners, as they will scratch the
surface of the unit.
For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablingdevices.com
iPad Mounting System #1556
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
The ultimate accessory!
The ultimate accessory!The ultimate accessory!
The ultimate accessory! Our terrific mounting system has three parts: a mounting platform, a light duty mounting arm, and a clamp. The mounting platform is designed for easy access to all of the iPad’s electronic ports. It also has two flexible cords to securely hold the iPad. The light duty mounting arm expands from 14½" to 24" for maximum flexibility and reach. The clamp allows you to easily mount the system to a wheelchair or tabletop. Mounting System works with both iPad 1 and iPad 2. It is also compatible with the iPad 1 case (#1555). Platform size: 10¾"L x 9½"W x 1½"H; Arm size: expands from 14½"L to 24"L.
1. Moun ting Arm Assembly:
Moun ting Arm Assembly: Moun ting Arm Assembly:
Moun ting Arm Assembly: Your mounting system consists of three main parts, an adjustable arm, iPad mounting plate and a clamp. First you will need to assemble the 3 main parts. To attach the clamp to the arm, loosen the set screw on the clamp (see Fig. 1). Next depress the Silver Spring loaded locking pin, then push one of the ends of the mounting arm into the clamp(see Fig. 2) Please Note: you need to line up the flat part of the Mounting Arm end post with the set screw in the clamp. This will prevent the arm from spinning freely inside the clamp. Once this is done you can tighten the setscrew to lock the Mounting arm to the clamp.
Fig. 1
2. Clam ping Options:
Clam ping Options: Clam ping Options:
Clam ping Options: Our mounting clamp is designed for mounting to tubular (wheelchair, bedrail, walker, etc.) or flat surfaces such as a table top or desk. For flat surface mounting use the included wedge insert shoe stored in front of the locking knob on the clamp (see Fig.2) Loosen locking knob slightly to remove wedge, tighten knob once wedge has been removed.
Fig.2
3. At this point we recommend you place your mounting arm without the iPad holder and do a rough setup, you can fine tune your adjustments after you have placed the iPad holder on the arm. Do not force or try adjusting the arm without first loosening the set knobs for that portion of the arm. Each section of the arm has a set knob. Once you have the arm in the desired position you can tighten the knobs to lock the arm in place.
4. Once the arm is in position you can now place your iPad and holder on the arm. First back off the set knob on the iPad mount holder until it is flush with the inside of the opening. This is necessary to allow the holder to be pushed all the way down on the mounting arm post. The post at the end of the arm also has a flat spot, which needs to be lined up with the set screw on the iPad holder’s base. Once this is done you can tighten the set knob to lock the holder to the arm. Please Note: Make sure to back the set screw enough to allow the holder to be pushed all the way down on the post of the arm, failure to do so will cause the iPad to fall off the mounting arm and a fall could cause damage to your iPad. (See Fig. 3).
Fig. 3
Rev 2
Rev 2Rev 2
Rev 2/2
/2/2
/2/1
/1/1
/17777
Tighten Clamp Locking Knob
Tighten Set Knob
Loading...