Towel Bar Installation Instructions
1 2
plates. Center to center spacing for mounting plates is the
same as the length of the towel bar.
Make two marks on wall to locate center of mounting
18”, 24” or 30”
18”, 24” or 30”
Use a screw driver to install three Screw Anchors
3 4
into the wall for each mounting plate. Install
mounting plates on top of the Screw Anchors.
Mark three hole locations for each
mounting plate.
Slip trim plates and towel bar posts over the
mounting plate stud. Tighten set screw at
the base of each towel bar post with the allen
wrench provided.
Attach with the sheet metal screws provided.
Screw
Anchors
Installed Screw
Anchors
Shape of trim
plate varies
depending on
style.
IN4-TOWELBAR REV. 11/16/04
Loading...