Emtac D152N, D157N User Manual

GPS Receiver Card

D152N / D157N

User Guide

FCC INFORMATION

The Federal Communication Commission Radio Frequency
Interference Statement includes the following paragraph:

This equipment has been tested and found to comply with the
limits for a Class B digital Device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction,
may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into and outlet on a circuit different

from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for

help.

1

The user should not modify or change this equipment without
written approval from EMTAC TECHNOLOGY CORP.
Modification could void authority to use this equipment.

Notice

User must make a fully charge to the LITHIUM Battery by
keeping the card operation for over 15 hours.

The information in this document is subject to change in order to
improve reliability, design, or function without prior notice and
does not represent a commitment on the part of EMTAC.
No part of this document may be reproduced or transmitted in any
form or by any means without the prior written permission of
EMTAC.

The measurement functions of this GPS card are stated in the
specification that is not intended for use in professional or
industrial precision measurements. Values produced by these GPS
cards should be considered as reasonable accurate representations
only.

2

Trademark Acknowledgments

SiRF and SiRFstarII are registered trademarks of SiRF Technology,
Inc.
Microsoft Windows are registered trademarks of Microsoft Corp.
IBM and Thinkpad are a registered trademark s of International
Business Machines Corp.

All other product names or trademarks are property of their
respective owners. Product and cooperate names mention in this

publication are used for identification purpose only.

I. Package Contents

The package should contain following items:

1. CRUXII GPS Card, PCMCIA (D152N) or CF (D157N) Type.

3

2. External Antenna

3. The driver CD

II. Installation Guide for Win98/WinME

Step1 – Turn on the Notebook/Desktop PC, and boot-up with

Win98/ME.

Step2 – Insert the PCMCIA\CF GPS card into one of the
Notebook/Desktop PC build-in PAMCIA slots.
Note: For CF type GPS card, The card must be connected to a CF­type II –to-PCMCIA adapter before inserted into the PCMCIA
slot.

4

Step3 – The Win98/WinME will show as follows to indicate that
there is a new device found.

Step4 – Press button <Next> to go to next screen.

Step5 – Chooses the first one to make Win98/WinME searching

for the best driver.

5