EMS GL7-207, GL7-307 Instruction Manual

1

Electron Microscopy Sciences

P.O. Box 550

1560 Industry Road Hatfield, PA 19440

TOLL FREE: 1-800-523-5874
TEL: [phone] WEB: www.emsdiasum.com
FAX: [phone] EMAIL: [e-mail]

Electron

Microscopy
Sciences

INSTRUCTION MANUAL

Stereo Microscopes – Non-illuminated Stands

Model GL7-207: Binocular, 6.5:1 Zoom Ratio 10X to 65X,

smooth ball bearing construction

and

Model GL7-307: Trinocular, 6.5:1 Zoom Ratio 10X to 65X,

smooth ball bearing construction

Electron Microscopy Sciences

P.O. Box 550

1560 Industry Road Hatfield, PA 19440

TOLL FREE: 1-800-523-5874
TEL: [phone] WEB: www.emsdiasum.com
FAX: [phone] EMAIL: [e-mail]

PLEASE READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING

THIS PRODUCT.

 AVOID EXPOSING THIS PRODUCT TO HIGH TEMPERATURES
 AVOID USING THIS PRODUCT IN SIGNIFICANTLY DIRTY OR DUSTY AREAS
 NEVER IMMERSE THE INSTRUMENT IN WATER OR IN ANY SOLVENT
 DO NOT PUT ANY FOREIGN OBJECTS INTO THE FRAME OR INTO ANY MOVING PARTS

OF THIS PRODUCT

 OPERATING TEMPERATURE IS 5°C TO 35°C
 OPERATING HUMIDITY IS 20% TO 80% AT 25°C

Contents

 Stand (1)
 Optical head (1)
 Focus mount (1)
 10X eyepiece (2)
 Eye guard (2)
 Dust cover (1)

Instructions

2

When reading these instructions, please refer to the assembly picture and to the microscope drawing
(Figure 1).

1. Unpack the microscope (NOTE: Remove the base and frame assembly first).

2. Using three (3) hex bolts with lock washers, which are taped to Styrofoam under the base, stand
the black base on rend with holes closest to the bottom and attach the Pole assembly.

3. Attach the roller boom assembly to the Pole by inserting the black knob, which is taped to
Styrofoam under boom, in the boom assembly to tighten.

4. Install the focus mount assembly by unscrewing the collar on the chrome post and slide the focus
mount onto the post, securing the collar.

5. Assemble the microscope by placing the optical head in the focus mount, tightening the setscrew.