Emprex PD-7201 User Manual

Download

PORTABLE DVD PLAYER

PD-7201

DVD/VCD/CD/MP3/CD-R/CD-RW/HDCD/JP

EG PLAYER

OWNER'S MANUAL

To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location.

TABLE OF CONTENTS

BEFORE USE

Safety Precautions Important Safety Instructions Notice Disc Protection Lithium

Battery Playable Discs Accessories

CONTROL and CONNECTION

Panel Basic connection Remote control

BASIC PLAYBACK REMOTE CONTROL

Preparations Basic Playback Pause/Step Playback Stop Playback Previous and Next Fast forward and Fast reverse Slow

Advanced Playback

TITLE

PBC

A-B REPEAT

REPEAT

ZOOM

OSD

SUBTITLE

SEARCH PROGRAM AUDIO RANDOM

VOLUME and MUTE

ANGLE

TFT-M

SPECIAL FUNCTION PLAYBACK

MP3 Playback

JPEG Disc Playback

Kodak Picture CD Function

12 12 12

REFERENCE

System Setup Trouble Shooting Special Function of DVD Function

Supported by DVD Discs

Specification

13 13 13 13 13 13 13 13 14 14 14 14 14 14

14 15 15

16 20 21 21 22

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage " within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The symbol for CLASS II (Double Insulation).

WARNING:

CAUTION:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

When replace the direct plug in power supply or a separable, cord-connected power supply, the replacement must be exact duplicate, or one recommended by the manufacturer.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

This Digital Video Disc player employs a laser System. Use of controls, adjustments or the performance of procedures other than those specified may result herein hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated.

DO NOT STARE INTO BEAM.

This product incorporates copyright protection technology that is protected by method claims of certain U. S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. " Dolby " and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.

Waste bin

Notes on discs

Do not play discs that are damaged or warped, including discs with cracks, scratches or parts missing discs with burns; poor quality discs.

Route all cords so that they do not interfere with driving or with entering or exiting the car

Run the cords so tat they do not wrap around the steering wheel, brake pedal etc. or around your feet. Secure all the cords together

Use the product at the proper volume setting

Driving while you are unable to hear sounds around you or from outside the car car can cause accidents.

Do not touch the color TFT LCD screen

Do not place any heavy objects on the product

Never put any heavy objects on the product. Doing so may cause damage to product.

Do not damage the cords.

Broken wires and short circuits can cause electrical shock or fire. Run the cords so that they do not get tangled in moving parts. Do not damage, tighten up, twist or work on the cords. Do not place the cords near heat sources or put heavy objects on the cords.

Do not play discs in the wrong format

For instance, if you add the ".cda" extension to a file that is not formatted as a CD file, a loud noise may be heard through the speakers. possibly damaging them and hurting your eardrums.

Do not swing from the product or pull it

This may cause an accident. injury and/or malfunction. Be particularly careful that children follow this rule.

The pickup may be condensed with water under the following situation.

NOTICES and DISC PROTECTION

Lithium battery connections

Charge the battery pack before using it for the first time.

Attaching Battery

Refer to the following steps for attaching the battery:

1. Make sure the player is off and the AC or car adapter is disconnected.

2. Place the player on a soft.

3. With one hand on the player to prevent it from moving, match the hooks of the battery pack into the holes on the bottom of the unit.

4. Combine the battery pack to push toward left until you can hear the click sound.

Note: Follow below illustrations to match the hooks of the battery pack along the left side of the holes on the bottom of the unit, in case of damages to the unit due to any improper mounting.

Portable DVD Back:

LITHIUM BATTERY

Detaching Battery

Make sure the power is turned OFF and the AC or car adapter is disconnected before detaching the battery. To separate the battery pack, pull the switch which is locate bottom the unit and from the main unit.

push toward right

Battery front:

Flush left here

LITHIUM BATTERY

Lithium battery

Please charge the battery with the unit. Never use this battery in other devices except this unit. Never use or keep the battery in a space has static, neither charge the battery in such area. Never use the unit outdoors in rainy or snowy day. The battery doesn't have waterproof function. Keep the dirt, liquid or other foreign thing stick on the power supply connector of battery. Never touch the power supply connector of battery with metallic things. Never change, disassemble, heat or throw batteries into a fire. Never store the battery in a place which temperature is over 60 C. Be sure to conform the related law or regulation in your country before discard the battery.

Usage of batteryLithium

Charge the battery before use it for the first time. The unit can charge the battery during disc playback.

Play with battery Lithium

1. Mount the battery properly

2.Turn on the Vol PW OFF button that main unit.

3.When the battery is being charged, the Battery

indicator is illuminated red.

4.If recharging is complete, charge indicator

changes to green colour.

5.When the battery is working, the battery

indicator is off.

When enjoying CD or not using TFT screen, close

the screen to save battery energy.

Lithium battery

When TFT display the picture dark and dark, please change the battery or insert adapt for charge. Then turn right VOLUME button and the unit will working.

Charging time/ playback time.

Charging time

When unit

working

About 20 hours About 4 hours

When unit

not working

Playback time

When use TFT

LCD Screen

When not use

TFT LCD screen

About 4 hoursAbout 2.5 hours

The time showed in above sheet also depends on the operation situation.

When the unit won't be used in a long time.

Remove the battery (The unit consume little energy even in turn off situation. This may over discharge the battery and cause a damage to it. Please recharge the battery again when you want to use it.

The following discs can be playback:

DVCD

SVCD

DVD-RW

Designed for

Windows

Media

DVD+RW

CD+G

Discs than those listed above can not be played. Non-standardized discs, even if they may be labeled as above can not be played. The performance of recorded disc is depend on the method and quality of disc-burning. In some cases, the disc may not be played.

ACCESSORIES

Audio/Video cable ....................

Remote control ........................

Owner's manual .......................

Adapter .....................................

Lithium battery..........................

Car charger...............................

Lithium battery

Car charger

Adapter

SETUP

ENTER

PROG

1 2

REPEATA-B RPT

VOL

MUTE

RANDOM

PORTABLE DVD PLAYER

TFT-M

PBC

TITLE

OSD

SUBTITLE

ANGLE

AUDIO

ZOOM

OWNER'S MANUAL

Owner's manual

PANEL

DVD/VCD/CD /CD-R/CD-RW/HDCD/JPEG PLAYER/MP3

OPEN

15 16

PANEL

1. TFT SCREEN

4:3/16:9

DOWN

4 5

SETUP

TITLE

7 8 9

10 11 12

2. 4:3/16:9(Multi-aspect ratio suit to

different TFT screen size)

3. DOWN(CURSOR)

4. UP(CURSOR)

5. MENU(TFT Screen menu)

6. DISC LID

7. SETUP

8. TITLE

9. PREVIOUS

10. NEXT

11. STOP

12. SLOW

13. PLAY/PAUSE

14. CURSOR

15. OPEN

Left

Right

Down

16. DISC LENS

17. REMOTE CONTROL SENSOR

18. POWER INDICATOR

19. LOUDSPEAKERS

20. VOLUME CONTROL

(POWER SWITCH)

AUDIO OUT VIDEO OUT

VOL

PHONE

PW OFF

DC 9V IN

21. PHONE

22. AUDIO OUT

22 23 24 19

23. VIDEO OUT

24. DC IN

Function

PANEL

4:3/16:9(in TFT screen)

Multi-aspect ratio suit to different TFT screen size.

MENU(in TFT screen)

The TFT screen will adjust by this button , for example: Color, Bright, Contrast etc. (you can use UP or DOWN to adjust)

TITLE

According to some DVD discs, Press this button to display the title menu, you can press digits to select the chapters preferred.

Previous and Next

During playing, press PREV key can back to start of this chapter, then each press this key will skip a chapter still the start of the disc. Each press of NEXT during playing will skip the current chapter and play the next one.

key

Stop playback

1. Press STOP button to go to stop mode, the TFT

screen will show the start logo. As some disc the unit can recall the location where stopped, such as DVDs and audio Cds.

2. Press PLAY button to playback to resume play back from the location where playback is stopped or from the beginning of the disc.

3. Press STOP twice to stop completely.

Slow

Press to play a disc in slow forward and slow reverse. Each time the button is pressed, the slow motion speed changes.

Press PLAY button to resume normal playback;

Note: This function is invalid for CD and MP3.

Play/Pause playback(in panel)

1. Press first time to pause playback (still mode).

2. Press twice to resume normal playback.

BASIC CONNECTION

Note: For enhance TV's quality of audio, please

volume control loud-

to lowest when you nonuse

speakers

in unit.

turn

For decrease power and protract natural life, please cover TFT screen when nonuse TFT screen in unit such as playing CD or using TV etc.

Connection of the power supply to unit

Plug the power plug of the adapter(DC 9V) into the DC-in power jack of the unit.

AUDIO OUTVIDEO OUT

VOL

PHONE

PW OFF

DC 9V IN

Connecting to a TV with Audio/Video cable

AUDIO OUT VIDEO OUT

VOL

PHONE

Red WhiteYellow

To video input(yellow) To audio input (red, white)

PW OFF

Black

DC 9V IN

Yellow

Connect to earphone

You can avoid disturbing others when enjoying the pleasure this unit brought to you

Note: Never set the volume of your earphone too high.

The aorist suggests it is better not continually enjoy it in a long time. If there is a tingle, please lower the volume. If you want to power off the unit, please turn the volume off. Be careful or stop to use if there has any potential danger. Even your earphone is design in open style, which can let you hear the surrounding sound, never set the volume too high or you can hear the surrounding sound, clearly.

AUDIO OUTVIDEO OUT

VOL

PHONE

PW OFF

DC 9V IN

REMOTE CONTROL

Function

PBC

TFT-M

SETUP

PROG

1 2

5 6

VOL

MUTE

8 9

TITLE

ENTER

OSD

REPEATA-B RPT

VOL

SUBTITLE

RANDOM

AUDIO

PORTABLE DVD PLAYER

ANGLE

ZOOM

1. SETUP

11 12

2. CURSOR

3. PROGRAM

4. DIGITS AND 10+ BUTTONS

15 16

5. A-B REPEAT

17 18

6. REPEAT

7. VOLUME+/-(Volume Control)

8. MUTE

9. RANDOM

10. PBC

21 22

11. TFT-M

23 24

12. PLAY

13. TITLE

26 27

14. PAUSE/STEP

Function

15. ENTER

16. STOP

17. OSD

18. PREVIOUS

19. NEXT

20. FAST REVERSE

21. FAST FORWARD

22.SEARCH

23. SLOW

24. MENU

25. ANGLE

26. SUBTITLE

27. ZOOM

28. AUDIO

TFT-M

PBC

SETUP

TITLE

ENTER

OSD

PROG

1 2

REPEATA-B RPT

VOL

SUBTITLE

ANGLE

VOL

MUTE

RANDOM

AUDIO

ZOOM

PORTABLE DVD PLAYER

unit

BASIC PLAYBACK( )REMOTE CONTROL

Preparations

Prepare the power supply and open the outer cover.

Basic playback

1. Turn left the volume, the unit will turn on and TFT

screen will display the start logo. When you want to turn off, please press turn volume off. If a disc is already in the tray, it wil tray, it will begin to play once the power is on.

2. Press OPEN to open the disc tray, place a disc on the disc tray. Do not place a disc which is unplayable in this unit.

3. Use disc lid to close the disc tray, the playback will automatically start. Some disc maybe can not playback auto matically, you can press PLAY button to start playback.

4. Some disc maybe start playback with a menu, use the cursor button on the remote controller to select menu options and press PLAY button to start, or press digits to select a menu options directly.

5. Adjust the volume.

Pause/Step playback

1. Press PAUSE/STEP first time to pause play-

back (still mode). The sound will be muted during still mode.

2. Press PAUSE/STEP continuous to single step forward to the next frame in the video.

3. Press PLAY button to resume normal playback.

Stop playback

1. Press STOP button to go to stop mode, the TFT

screen will show the start logo. As some disc the unit can recall the location where stopped, such as DVDs and audio Cds.

2. Press PLAY button to playback to resume play back from the location where playback is stopped or from the beginning of the disc.

3. Press STOP twice to stop completely.

Slow

Press to play a disc in slow forward and slow reverse. Each time the button is pressed, the slow motion speed changes.

Press PLAY button to resume normal playback;

Note: This function is invalid for CD and MP3.

Previous and Next

Fast forward and Fast reverse

1. Press F.FWD to fast forward through the disc.

Each time the F.FWD button is pressed, the fast forward motion speed changes.

2. Press ENTER to resume normal playback.

3. Press F.REV to fast reverse through the disc.

Each time the F.REV button is pressed, the fast reverse motion speed changes.

4. Press PLAY button to resume normal playback.

NOTES:

1. " " m ay a ppear o n th e TFT sc reen during operation. A " " means that the operation is not permitted by the unit or the disc.

2. When choose the power supply as the battery,

the battery icon in the LCD screen will twinkling if the voltage of the battery is lower than protection point. Please charge the battery or choose DC power supply immediately.

key

ADVANCED PLAYBACK

IMPORTANT NOTE:

THE FOLLOWING FUNCTIONS ARE APPLICABLE ONLY TO DVD DISCS. IF OTHER DISC FORMATS ARE PLAYED, SCREEN DISPLAY AND OPERATIONS MAY BE DIFFERENT.

TITLE

According to some DVD discs, Press this button to display the title menu, you can press digits to select the chapters preferred.

PBC

The PBC allows the user to play Video CDs interactively. If PBC is ON, the user can use the digits buttons to select track only in the menu, if PBC is OFF, the user can select the track directly.

A-B REPEAT

During playback , when you reach the start of the segment you want to repeat, press the A-B REPEAT button(Ponit A), press the A-B REPEAT button again at the end of the segment(Ponit B), the player will automatically return to point A and start to repeat playback of the selected segment(A-B). press A-B REPEAT button to resume normal playback.

REPEAT

Follow this operation :

first Chapter

twice Title

third All

the fourth pressed will cancel repeat.

Press this button to display Main menu. Select tracks according to your preference.

ZOOM

this button

Press to zoom in on the incoming AV signal and to cycle through all the levels. You can use the cursor buttons to move around the image. This will display the parts of the image that do not appear on-screen when the image is zoomed in. Press the ZOOM button repeatedly to return to normal viewing.

OSD (On Screen Display)

Press this button and the screen will display some information about disc, such as : " Title Elapsed " , " Title Remain ", " Chapter Elapsed ", " Chapter Remain " and " Display Off ".

SUBTITLE

Press this button and the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal number of this language; "XX" indicates total number of language; "XXXXXX" indicates the language of country. (the number of language depends on disc).

Press this button the screen will display "T: XX/XX C: XX/XX", "TITLE XX/XX TIME 00 : 00 : 00" and CHAPTER XX/XX TIME 00 : 00 : 00. you can use LEFT / RIGHT cursor button to select item and press digitals what you wanted, Then press ENTER button to confirm.

ADVANCED PLAYBACK

PROGRAM

Press this button and the screen will display info window , press digits button to input the program number what you want, when finished, move the cursor to select the " Start " logo, at this time the unit will start program playback and the screen will display "Program" logo. If you want to cancel this function, press "STOP " and then press "ENTER" .

AUDIO

Press this button on remote control to change the mode of audio. For example: Audio 1/2: AC 3 2 CH English Audio 1/2:AC 3 2 CH Chinese Note: When press this button continuously, you must above 3 seconds interval.

RANDOM

Press the button to random mode, the unit will play by random.

MP3 PLAYBACK

TFT-M

The TFT screen will adjust by this button , for example: Display mode, color, bright, contrast etc.

ANGLE

If the video on the DVD was recorded with multiple angles, you have the option to change the camera angle of the scene you are watching. Press ANGLE button during playing back that will display the angle mark on screen. Note: the angle function will not work if your disc does not contain the multiple angles.

VOLUME and MUTE

Press " VOL+ " at the right of VOLUME to increase volume, " VOL- " to decrease to volume . Press the MUTE button to temporarily cancel the audio signal at any time and will display Mute ( no voice ) , the second press to resume normal audio.

When playing MP3 disc, a navigation menu will be displayed automatically if the disc is loaded in succession. In the menu, use UP or DOWN button in the cursors to choose folder, then press " ENTER " button to confirm. In the folder, use UP or DOWN button in the cursors to select the file, then press "ENTER " to play this file. In this page, Use LEFT button in the cursors can return previous menu, press PREV or NEXT can go to the previous or next page.

00:00 00:00

001/010

MP3_01

MP3_02

MP3_03

MP3_04

MP3_05

MP3_06

SPECIAL FUNCTION PLAYBACK

Kodak Picture CD Playback

Playback (Normal)

When a Kodak Picture CD is inserted on the unit, an automatic slide show is launched. Each picture in the Kodak Picture CD will be displayed consecutively in a slide-show fashion. some slide-show transition modes are provided, use PROG button to select. Customer can set transition effects for each picture. To display an image indefinitely, press PAUSE button. To view the next or previous picture, press NEXT or PREV button. To resume the slideshow, press ENTER button.

Image Rotation

There are four modes to rotate a picture: "Invert", "Mirror", Left", and "Right". These operations are allowed only when a picture is being displayed normally and will be cancelled automatically when a new picture is displayed. The arrow key is used to select the different rotation modes:

Up - Invert/Normal Left - Turn left Down - Mirror/Normal Right - Turn right

Zoom

The ZOOM button is used to turn on or off this function. When this mode is on, any picture will be displayed at the last ratio selected by the user. A message on the screen will indicate the current zoom ratio.

If zoom mode is on, F.FWD and F.REV button are used to control the ratio of zoom in/out.

Notes: During zoom function, slide-show transition and image rotation are disabled. To cancel the zoom function press ZOOM button again to resume the slide-show.

Digest

The STOP button is used to display thumbnail size pictures. After it is enabled, some scaled-down thumbnail pictures will be displayed on the screen. The NEXT and PREV button can be used to display the next / prev pictures in the Kodak Picture CD. You can select any of the displayed thumbnails by using the Arrow Keys and press ENTER button. If you desire to display an image indefinitely, press PAUSE button. To view the next or previous picture press NEXT or PREV button. To resume the slide show press ENTER button.

IMPORTANT NOTE: Quality of pictures displayed on the screen is highly dependent on the viewing device.

JPEG DISC PLAYBACK

When playing JPEG disc, a navigation menu will be displayed automatically if the disc is loaded in succession. In the menu, use UP or DOWN in the cursor to select a file,then press "ENTER", the file will be play with aslide-show. press PREV or NEXT to select the previous or the next picture. Press PAUSE to pause the current picture for enjoying, when press ENTER, it will return to normal playing. Press ZOOM to start zoom function. When ZOOM is on, press PREV or NEXT to switch among pictures; press F.REV and F.FWD to select different enlargement ratio, press CURSOR key can move the enlargement picture.

SYSTEM SETUP

When you press SETUP button on the remote control, the setup menu will be displayed. It include General Setting , Audio Setup , Video Setup, Preference Setup, Password Setup and Exit Setup menu.

1.Within the setup menu, you can use UP, DOWN, LEFT and RIGHT buttons on the remote control to move the cursor, and then press the ENTER button to make your selection. Press LEFT can return the previous menu.

2.To exit setup menu, you can select the exit setup menu or press SETUP button.

1. GENERAL SETUP PAGE

Setup TV screen format, video type and all DVD functions.

1.1 TV DISPLAY

General Setup Page

TV Display Angle Mark OSD Lang Captions Screen Saver Default

Set TV Display Mode

The TV Display which select the different ratio of display format and the screen of TV, There are various types of display on screen for different matches between Disc and TV (Please see page 20: Multi-image ratio mode)

Note: No matter which display format is selected, a picture recorded in standard 4:3 format always displays in the 4:3 aspect ratio. The display format of DVD titles may vary; please refer to the information that accompanies your specific DVD title. If the DVD title is recorded in 16:9 wide display format while the TV is a standard 4:3 screen, horizontal compression of the image will result. Some DVD titles may be recorded in special formats. In such cases, the DVD titles will always appear on the screen in their original format, regardless of which TV display format you select.

PS On ENG Off On

Normal/PS Normal/LB Wide

1.2 ANGLE MARK

ANGLE MARK: Users can select a particular camera

angle when playing a DVD which offers multiple angles.

General Setup Page

TV Display Angle Mark OSD Lang Captions Screen Saver Default

Turn Angle Mark Off

PS On ENG Off On

On Off

1.3 OSD LANGUAGE

On Screen Display (OSD) Language: Users can

select the whole setup menu and on-screen display language.

General Setup Page

TV Display Angle Mark OSD Lang Captions Screen Saver Default

Set OSD Language

PS On ENG Off On

English

1.4 CAPTIONS

CAPTIONS: For hearing-impaired people. the picture

can be displayed with recorded explanatory captions.

General Setup Page

TV Display Angle Mark OSD Lang Captions Screen Saver

Default

Captions

PS On ENG Off On

On Off

SYSTEM SETUP

1.5 SCREEN SAVER

SCREEN SAVER: If the screen saver is on,then there

will be an animated picture on the screen whenever the DVD player is idle for a certain time.

General Setup Page

TV Display Angle Mark OSD Lang Captions Screen Saver

Default

Screen Saver

PS On ENG Off On

On Off

1.6 LAST MEMORY

DEFAULT: Resets to all the manufacturer's original

settings for this DVD player Press ENTER button to perform the reset.

General Setup Page

TV Display Angle Mark OSD Lang Captions Screen Saver

Default

Load Factory Setting

Note: The preference setting is active only when no disc, stop or open the disc tray.

PS On ENG Off On

Reset

2.1 SPEAKER SETUP PAGE

Audio Setup Page

Speaker Setup HDCD

Go to Speaker Setup Page

2.1.1 Downmix DOWNMIX MODE: sets front speakers to LT/RT Stereo.

Analog Audio Setup Page

Downmix

Set Downmix Mode

LT/RT LT/RT

Stereo

2.2 HDCD SETUP PAGE

Audio Setup Page

Speaker Setup HDCD

2. AUDIO SETUP PAGE

Audio Setup Page

Speaker Setup HDCD

Go To Audio Setup Page

Go To HDCD Setup

2.2.1 FILTER FILTER: Sets the ratio of filter.

HDCD Setup Page

Filter

Off

1X 2X

Please choose the sampling frequences of digital filter, the higher the sampling frequences are, the clearer the audio quality is. When default setting is off, it will display "CD" by reading HDCD, for HDCD playback, please choose 1X or 2X

SYSTEM SETUP

3. VIDEO SETUP PAGE

3.1 VIDEO QUALITY SETUP PAGE

Video Setup Page

Quality

Go To Video Quality Setup Page

3.1.1 SHARPNESS SHARPNESS: Sets the sharpness level of video

output.

Video Quality Setup

Sharpness Brightness Contrast Hue Saturation

Sharpness

3.1.2 BRlGHTNESS BRIGHTNESS: Sets the brightness level of video

output.

Video Quality Setup

Sharpness Brightness Contrast Hue Saturation

Brightness

MID 00 00 00 00

High Medium Low

3.1.3 CONTRAST CONTRAST: Sets the contrast level of Video output.

Video Quality Setup

Sharpness Brightness Contrast Hue Saturation

Contrast

MID 00 00 00 00

Press right button the TV will display a vale. Press LEFT/RIGHT button to adjust, then press

button to confirm and return upon menu.ENTER

3.1.4 HUE HUE: Sets the hue value of the Video.

Video Quality Setup

Sharpness Brightness Contrast Hue Saturation

Hue

MID 00 00 00 00

Press right button the TV will display a vale. Press LEFT/RIGHT button to adjust, then press

button to confirm and return upon menu.ENTER

3.1.5 SATURATION SATURATION: sets the saturation of the video.

Video Quality Setup

Sharpness Brightness Contrast Hue Saturation

MID 00 00 00 00

Press right button the TV will display a vale. Press LEFT/RIGHT button to adjust, then press

button to confirm and return upon menu.ENTER

Saturation

Press right button the TV will display a vale. Press LEFT/RIGHT button to adjust, then press

button to confirm and return upon menu.ENTER

SYSTEM SETUP

4. PASSWORD SETUP PAGE

The preference setting is active only when no disc, and the setting is effective on each time power on till exchanging the saved setting.

4.1 PASSWORD CHANGE

PASSWORD CHANGE: you can change the

password, please type 6 numerals as new password.

Password Setup Page

Password Parental

Change Password

Old Password

New Password

Confirm PWD

Change

4.2 PARENTAL

PARENTAL: The parental control function works in

conjunction with the different censorship classes assigned to DVDs. These classes help to control the types of DVDs that the family watches, There are up to 8 censorship classes for DVDs.

Note: If you change this set, you must input password.

(Initial password : 136900)

Password Setup Page

Password Parental

Set Parental Control

1 KID SAF 2 G 3 PG 4 PG 13 5 PGR 6 R 7 NC 17 8 ADULT

TROUBLE SHOOTING

Please check the following guide for the possible cause and solution for a problem before contacting the nearest service center or dealer for repairs.

SYMPTOMS AND CORRECTIONS

SYMPTOMS CORRECTIONS

No power

TV No picture

TFT No picture

No sound

Failed to Play

Failed to respond to

remote control

Picture Disturbance

Failed to work

with keys

The remote control

does not work properly

Check to make sure that the power connection is secure.

The battery is discharged, please recharge the battery.

Make sure the connection between the player and the TV is secure.

Make sure that the TV is in good working condition.

Make sure that the battery has enough capability.

Make sure the connection between the player and other devices are secure.

Make sure that the TV and AMP are in good working condition and setup properly.

Make sure the volume control that at the unit turn on.

Check that the disc is properly inserted.

Clean the disc.

Cancel the Rating function or change the rating level.

Remove obstacles between remote control and unit.

Aim remote control at the sensor on the front panel

Check batteries and replace them if necessary.

Check the disc for dirt and scratches. Clean or replace disc.

Shut down the unit, wait ten seconds, and restart the unit.

Power surges or brown outs or other electrical phenomena. Shut down the unit, wait ten seconds, and restart the unit.

Operate the remote control within about 3m

Note: In case this DVD player incur powerful static electric shock on work, or cause audio&video freezing by other reason, pls pull out adapter and batteries so as to break completely, then electrify it again for working.

SETTING THE TV SCREEN SIZE

Multi-aspect ratio suit to different TV screen size.

Picture format

on Disc

Pan Scan

4:3

16:9

Function supported by DVD discs

There are many functions available on DVD discs and the functions vary per player and per manufacturer.

Regional code and signal system

Dolby digital surround sound

Number of languages

Subtitle languages

TV Screen Size

16:9

Letter-box Wide Screen

Picture proportion modes

Parent lock

Angles for viewing

Closed Caption

System and Outputs

TFT screen size 7 inches

VF Signal

system

Frequence

response

Audio S/N ratio

Video/Picture

Audio

Audio output

(analog audio)

Video output

NTSC

CD: 20Hz-20KHz(EIAJ) DVD:

> 65 dB

MPEG1 V2.0; MPEG2

MPEG LAYER2 standard

General

~ 110V- 240V 50/60HzAC Power

DC Power

Power

consumption

Product

Dimensions

Weight

Operating

temperature

Operating

humidity

< 14W(working) < 0.25W(standby)

L: 197mm W: 152mm H: 40mm

0.8kg

5 C to 35 C (41 F to 95 F)

5% to 90%

20Hz-44KHz(96KHz)(Sample result)

20Hz-22KHz(48KHz)(Sample result)

oooo

SPECIFICATION

Note: We reserve the right to modify the design without advice!

1-3090-7240-0000

Emprex PD-7201 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual