Emprex PC320 User Manual

A

A

p

PC320

Web Cam

User’s Guide

separately “ArcSoft WebCam Companion”
icon, and then follow the on-screen
instruction to install the application
software.

6. The wizard will install ArcSoft suite: four
softwares at the same time.

7. After first time installation, the system will
restart; there will be a new icon on the
desktop.

2. When the “Properties” dialog box pops up,
please select “VGA SnapSize” and click
mouse button to choose the VGA snap
size you need. There are four selections
as below:

0: 640 * 480 1: 800 * 600
2: 1024 * 768 3: 1280 * 1024

Version 1.0

For Notebook, LCD panel monitor

Operating System Requirements

 Windows 98SE, Windows Me, Windows 2000,

Windows XP, Windows Vista™

Driver Software Installation

ttention:

Make sure to install driver and software
BEFORE

1. Insert the software CD into the CD-ROM

2. The installation program will run

plugging the camera into USB port.

drive of your computer.

automatically. If the installation does not
auto play, please run “autorun.exe” from
the CD-ROM’s root directory to install.

8. Connect your WebCam to an available
USB port on your computer. Windows
should detect your new device.

Hardware Installation

1. Plug the enclosed USB cable into camera
and USB port on the PC separately, and
then follow the on-screen instructions to
install the hardware. To avoid low voltage,
we recommend the user to plug the cable
connector to USB port on PC directly.

2. Once pressing the snap shot button, the
LED indicator on camera will light up and
the “AMCAP” dialog box will pop up while
the installation is successful.

3. Please select AMCAP and enable
“preview function” to view the video after
first-time installation. If there is no video
shown, please remove and connect again
to make sure the USB connection is
completed.

Notice:

Please download the latest update of “Service
Pack” (from Start  Windows Update) to keep
the camera running smoothly.

ttention:

If you have more than one image device in
your system, please select the CamMaestro
as the PC Camera device. In this way, you can
use this camera to ca

Power Source Adjustment

Choose the mode of “50Hz” or “60Hz” according
to your power source environment or video
output signal system to avoid the blurry image.

Amcap  Option  Video Capture Filter 
OK

ture images.

3. Under Windows® 98SE/ME/2000/XP
operating system, move the mouse
cursor to any empty space on the screen.
Right click the mouse button and select
“Properties” to pop up the “Display
Properties” dialog box. Please select
“Settings” and then adjust the screen
resolution to match the “VGA SnapSize”
you selected before.

4. Under Windows Vista™ operating
system, move the mouse cursor to any
empty space on the screen. Right click
the mouse button and select
“Personalize” to pop up the “Display
Settings” dialog box. Please select
“Monitor” and then adjust the screen
resolution to match the “VGA SnapSize”
you selected before.

3. Click the “Web Camera Driver” icon to
install device drivers.

4. Click “DirectX-Update” to install DirectX
(9.0C) if you use old version or never
installed before.

5. After driver installation, please click

Snap Size Adjustment

1. Press the snap shot button on camera to
pop up the “AMCAP” dialog box. Please
select “Option” and then click “Video
Capture Filter” to continue.

3100553661 Version 1.0 Mar. 2007

Caméra Vidéo Digitale Mode d'emploi

A

A

A

g

A

A

p

A

A

d'installation rapide

Videocamera digitale Guida

all’installazione rapida

Guia do Utilizador da Câmara Web

Configuration Requise

 Windows 98SE, Windows Me, Windows

2000, Windows XP, Windows Vista™

Installer l’application et le Driver

ttention:

ssurez-vous d'installer le software avant de

brancher la caméra dans le USB.

1. Insérez le CD dans le CD-ROM de votre
ordinateur.

2. Attendez quelques secondes et l'installation
se mettra en route automatiquement

 Attention: Si l'installation du ArcSoft n'est

pas automatique, allez sur la Barre des
Tâches et cliquez sur “Démarrer”, puis sur
“Activer” et cherchez “autorun.exe” dans le
CD du logiciel et cliquez sur “OK”.

3. Cliquez sur l’icône “Web Camera Driver”, et
l’installation s’effectuera automatiquement.

4. Veuillez cliquer séparément sur les icônes
“ArcSoft WebCam Companion”, puis suivez
les instructions sur écran pour installer le
logiciel d’application.

5. Une fois que toutes les procédures
d’installation sont terminées, le système
d’opération doit être relancé.

French

Digitale Videokamera Anleitung zur

schnellen Installation

Systemvoraussetzungen

 Windows 98SE, Windows Me, Windows

2000, Windows XP, Windows Vista™

Installieren der Anwendungs Software

ttenzione:

assicurarsi di installare il software PRIMA di

1. Legen Sie die Software CD in das CD-ROM

2. Warten Sie einige Sekunden, das Setup

 Achtung: Sollte das ArcSoft Setup nicht

3. Klicken Sie auf das “ Web Camera

4. Klicken Sie jeweils auf die Symbole

5. Das Betriebssystem muss neu gestartet

are la videocamera alla porta USB.

colle

Laufwerk Ihres Computers ein.

beginnt automatisch.

automatisch beginnen, klicken Sie auf
“Start” auf der Taskleiste und dann auf
“Ausführen”. Suchen Sie die Datei
“autorun.exe“ auf der Software-CD und
klicken dann auf “OK”.

Driver”-Symbol”. Die Installation wird
automatisch vervollständigt.

“ ArcSoft WebCam Companion” und
befolgen die Anweisungen auf dem
Bildschirm, um die Anwendungssoftware
zu installieren.

werden, nachdem alle Setupprozesse
vervollständigt wurden.

German

Requisiti del sistema

 Windows 98SE, Windows Me, Windows

2000, Windows XP, Windows Vista™

Installazione dell’ driver

ttenzione:

assicurarsi di installare il software PRIMA
collegare la videocamera alla porta USB.

1. Inserire il CD software nell’unità CD-ROM
del computer.

2. Attendere alcuni sec ondi ed il programma di
configurazione si avvierà automaticamente.

 Attenzione: se il programma di

configurazione ArcSoft non si avvia
automaticamente andare sulla barra delle
applicazioni, dalla Barra delle Applicazioni
fare clic su “Start”, e poi su “Esegui” trovare
il file “autorun.exe” nel CD con il software e
fare clic su “OK”.

3. Fare clic sull’icona “Web Camera Driver” per
poter completare automaticamente
l’installazione.

4. Fare clic separatamente sulle icone “ArcSoft
WebCam Companion”, e seguire le
istruzioni che vengono visualizzate sullo
schermo per poter installare il software
applicativo.

5. Una volta completate le procedure di
installazione è necessario riavviare il
computer

di

Italian

Cámara de Vídeo Digital Guía de

instalación rápida

Requisito de Sistema

 Windows 98SE, Windows Me, Windows

2000, Windows XP, Windows Vista™

Instalación de driver

tención:

asegúrese de instalar el software antes de
enchufar la cámara en la

1. Inserte el CD software en la unidad de
disco CD-ROM de su computadora.

2. Espere unos segundos y el sistema
funcionará utomáticamente.

 Atención: si el sistema no funciona

automáticamente, vaya a la Barra de
tareas y haga clic en “Inicio, y, a
continuación, en “Ejecutar” y busque
“autorun.exe” en el CD del software y
haga clic en “Aceptar”.

3. Haga clic en el icono “ Web Camera
Driver” y la instalación.

4. Haga clic en el icono “ArcSoft WebCam
Companion”
instrucciones que aparecen en pantalla
para instalar el software de aplicación.

5. Una vez terminado el procedimiento de
configuración, es necesario reiniciar el
sistema operativo.

y, a continuación, siga las

uerta USB.

Spanish

Requisitos do Sistema

 Windows 98SE, Windows ME, Windows

2000, Windows XP, Windows Vista™

Instalação do software

tenção:

Certifique-se de que instala o software

NTES de ligar a câmara à porta USB.

1. Introduza o CD contendo o software na
unidade de CD-ROM do seu computador.

2. Espere alguns segundos para que a
instalação seja executada
automaticamente.

 Nota: Caso a instalação não seja

automaticamente iniciada, vá até à barra
de tarefas e clique em "Start"(Iniciar), de
seguida em “Run” (Executar) e procure o
ficheiro “autorun.exe“ no CD contendo o
software, de seguida clique em OK.

3. Clique no ícone “Web Camera Driver” para
que a instalação seja concluída
automaticamente.

4. Clique separadamente nos ícones “ArcSoft
WebCam Companion”, siga as instruções
mostradas no ecrã para instalar o software
de aplicação.

5. Quando todos os procedimentos de
instalação estiverem concluídos, é
necessário reiniciar o sistema operativo.

Portuguese

電腦視訊攝影機—快速安裝指南

作業系統需求：

 Windows 98SE, Windows Me, Windows

2000, Windows XP, Windows Vista™

安裝程序

注意事項

必需先安裝完成驅動程式軟體，才能將視訊
攝影機插上電腦的 USB 槽。

1. 將軟體安裝光碟片放進電腦的光碟機中。

2. 電腦會自動執行軟體安裝畫面。

 若軟體安裝畫面無法自動執行，請從 CD 片

3. 點選 “Web Camera Driver“ 圖示安裝驅動

4. 驅動程式安裝完畢後，請點選 “ArcSoft

5. 安裝完畢後，電腦系統將會重新開機，以執

::

的根目錄中點選

“autorun.exe“

程式。

WebCam Companion” 圖示，依照安裝精靈

之步驟安裝應用軟體。

行新的驅動程式。

“Driver”檔案夾，執行

程式安裝相機驅動程式。

Chinese