Emprex MP507 User Manual

MP-507

DIGITAL AUDIO PLAYER

USER MANUAL

1

Brief description of functions

 MP3/WMA digital player
 USB2.0 high speed transmission, compatible with USB1.1
 Code string display, elegant graphic menu
 The player supports Win 2000/WinXP/WinME system format (supporting

FAT16/FAT32 format)

 EQ mode: Normal, pop, Jazz, rock, classic
 Repeat play mode: repeat all, repeat single and sequence play
 Low power consumption and available to continuously play about 10 hours
 Record Function
 A—B repeat

Screen introduction

1 Volume level 6 File format 11 USB status

2 A-B repeat mode 7 Battery capacity display

2

12

Stop
mode

3 Function menu 8 Play time 13 Track status

4 Repeat mode 9 EQ mode 14 Play mode

5 Hold mode 10 Record mode

B asic operation

1.Battery

Remove the USB cover, push away the battery cover and insert one AAA battery into
battery compartment according to the polarity indication. Recover the battery cover. If
the battery capacity is insufficient, the icon
timely.

Remarks: If the player is not to be used for a long time, please take out the battery.

2.Power ON/OFF

1. Long press (play /pause key), the display screen indicates “HELLO” or other
logo. After the power on, it will enter the standby status.

2. Under the stop status, long press (play / pause key) to turn off the player and the
player displays OFF.
Remarks: When under standby status and without any operation, the player will be at
standby for about１minute and then the power will be cut off automatically. In this case,
the display screen indicates OFF.

3.Play music

When powering on, the player is at MP3 standby status. Short press
key) to start play music, and the display screen will indicate the present track playing

flashes. Please replace the battery

(play / pause

3