Emprex M993U User Manual

RRFF OOppttiiccaall RReecchhaarrggeeaabbllee MMoouussee

QQuuiicckk IInnssttaallllaattiioonn GGuuiiddee

Congratulations on your purchasing this exciting RF optical rechargeable mouse. This multi-function
optical office mouse is with great features powerful office application functions and quick access to
Internet and Multimedia menus. All those human-oriented characteristics make you feel more
comfortable and efficient while surfing on the website or using applications. The most special thing of this
mouse is the “3 in 1 receiver set”: receiver + mouse recharger + battery recharger. This thoughtful
design makes the user save more desk space then ever and save money on batteries. After the
MouseMaestro driver installed, you will have “Quick Jump” function by clicking the “Office Button” to call
the most often-used functions in Internet, Multimedia, Office, and other applications. Please install the
MouseMaestro Input Device driver to find more significant functions!

System Requirements

1. Available PS/2 or USB port.

2. Operating system:

USB Model

Combo Model

Windows® 98, Windows® ME, Windows® 2000 or Windows® XP operating
system

Microsoft® Windows® 98, Windows® ME, Windows® 2000 or Windows® XP
operating system

Hardware Installation

 Connect the mouse onto Your PC System

USB Model

Combo Model
(USB Model +
USB to PS/2
adapter)

Just directly plug the USB connector into the USB port on
PC.

For PS/2 port system, please use the “Combo Adapter”
(USB to PS/2 adapter). This adapter helps you a lot on
solving the USB to PS/2 port issue.

1. Turn off the PC system first.

2. Connect the combo adaptor onto the USB connector.

3. Directly plug the PS/2 side of the combo adaptor into
the PC PS/2 mouse port.

4. Turn on the PC system.

USB Connector

Combo Connector

(USB to PS/2 Adaptor)

ID Setting

This wireless optical mouse contains 4095 sets ID and 2 channels. The ID-recognition function helps to
protect against interference from other RF products in the same environment. Remember to reset ID
when other RF products affect your mouse.

 The word CONNECT labels the ID button on each unit.

 The LED in front of the rechargeable set shows connecting condition.

 The mouse should be able to work after you first install it. If it can’t work, please follow the steps

below to process ID setting of this RF optical rechargeable mouse.

M993U/C QG 英
3100506070 v1.0

1. Firstly, press the ID button on the bottom of the receiver once.

The receiver indicator at the mouse front side will to wait the signal from the
mouse.

2. Then press the ID button on the bottom of the mouse once.

3. The receiver indicator at the rechargeable set front side will flash quickly
and then stop to show the connecting status.

ID BUTTON

Note:

1. You must follow the procedure above to complete ID setting.

2. The whole procedure should be completed within 60 seconds, or you will need to start again.

Software Installation

1. Insert the driver CD into your CD-ROM.

2. Run “SetupKey.exe”.

3. Then follow the on-screen instruction to install the driver. The default install path is set to c:\Program

Files\MMaestro. You have the option to change the install path during set-up.

4. The driver icon

operating system needs to restart.

Note: Before installing the MouseMaestro input device driver for USB optical mouse, you have to make

sure that the USB device driver has been installed and the USB optical mouse is recognized by
Windows operating system. You may move the mouse to see if it is correspondently, and thus to
know the mouse works well.

will show on Windows system tray when the installation is complete. The

M993U/C QG 英
3100506070 v1.0