Emprex M971 User Manual
RRFF OOppttiiccaall MMoouussee QQuuiicckk IInnssttaallllaattiioonn GGuuiiddee
Congratulations on your purchasing this exciting mouse. Your new mouse is easy to install and
offers you a host of useful features. The great features of this mouse are wheel for quick
scrolling and wireless function for easy movement. With the wireless function, you can pass
around the mouse during meetings without bothering from a cable or you can write e-mails and
surf the Internet from the comfort of your living room couch. All those human-oriented
characteristics make you feel more comfortable and efficient while surfing on the website or
using applications. Please install the MouseMaestro Input Device driver to find more great
functions!
System Requirements
Microsoft® Windows® 98, Windows® ME, Windows® 2000 or Windows® XP
operating system
Available USB Port
Hardware Installation
Connect the Receiver to Your PC System
1. Connect the receiver to your PC by plugging in the receiver connector into
USB port on your PC.
2. Take the mouse and make sure the batteries on the back are installed
correctly. (Follow the polarity signs in the battery compartment.)
ID Setting
This wireless optical mouse contains 255 sets ID. This ID-recognition function helps
to protect against interference from other RF keyboards in the same environment.
Remember to set the ID when you replace the batteries.
The word CONNECT labels the ID button on each unit.
The LED under ID button of receiver shows connecting condition.
1. Your PC must be on for the ID setting.
2. Press the ID button on the side of the receiver once.
3. Press the ID button on the bottom of the mouse once.
Attention: The whole ID setting procedure should be completed within 1 minute.
ID Button(LED)
ID button of Receiver
(With LED under the ID button)
ID Button on mouse bottom
ID BUTTON
Software Installation
1. Insert the disk labelled “MouseMaestro Input Device Driver” into your disk
drive.
2. Open File Explorer to find “SetupKey.exe” from the disk.
3. Double-click the “SetupKey.exe”.
4. Then follow the instruction on the screen to install the driver. The default install
path is set to c:\Program Files\MMaestro. You have the option to change the
install path during set-up.
5. Set up will indicate when installation has successfully completed. The driver is
loaded when you see the driver icon
in the system tray (lower right corner
of the screen). The operating system needs to restart.
Battery Low Alarm
Only after installing the MouseMaestro Input Device Driver that this “Battery Low Alarm” can
be functioned. The computer will display a battery low icon
Windows system tray. The battery low icon
will disappear after changing new batteries.
besides the driver icon on
Please remember to reset ID after changing new batteries.
Important
1. This optical mouse uses light to sense movement. It cannot work on a glass, translucent,
reflective, or dark color surface.
2. Use the mouse only on a clean, flat, non-slippery, opaque surface in order to ensure
smooth and accurate cursor action
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions may cause harmful interference to radio com munications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harm ful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measur es:
Reorient or relocate the rec eiving antenna
Increase the separation between the equipm ent and receiver
Connect the equipment into an outlet on a c ircuit different from that to which the receiver is connec ted.
Consult the dealer or an experienc ed radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment.
This device complies with Part 15 of the FCC Rules. Operation is s ubject to the following two conditions: (1) This device may not cause harm ful interference. (2) This
device must accept any interference received, including interference that m ay cause undesired operation.
This equipment is intended for use in the following countries EU 15 countries:
Austria, Belgium, Denmark, Finland, France, Germ any, Ireland, Italy, Luxembourg, Netherlands, Spain, Sweden, United Kingdom, Portugal, Greece. And other non-EU
countries: Switzerland, Norway, and Iceland.
低功率電波輻射性電機管理辦法：
第十四條：經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十七條：低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
Information to User:
Any changes or modifications not expressly approved by the party res ponsible for compliance could void the user’s authority to operate this equipment. Shielded
IBM AT and PS/2 are registered trademarks of International Bus iness Machines Corporation.
Microsoft and Windows are registered tradem arks of Microsoft Corporation in the United States and/or other countries.
All other trademarks are tradema rks of their respective holders.
前項合法通信，指依電信法規定作業之無線電信。
低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
interface cable, if any, must be used in order to comply with emission limits.
FCC GUIDELINES
3100505210 Version 1.0 Feb. 2004 Printed in China
Loading...