BEFORE USING THIS PRODUCT
S
AFETY PRECAUTIONS
........................................................................................................................ 2
.......................................................................... 2
INTRODUCTION YOUR TELEVISION
S
UPPLIED ACCESSORIES
TV C
ONTROL FUNCTIONS
S
ETTING UP THE REMOTE CONTROL
R
EMOTE CONTROL FUNCTIONS
I
NPUTS AND OUTPUTS
DESCRIPTION OF OPERATION
1. P
OWER ON/OFF
2. I
NPUT SWITCHING
3. V
OLUME CONTROL
4. M
UTE
...........................................................................................................................................10
5. S
CREEN DISPLAY OF INPUT SIGNALS
6. S
LEEP TIMER
7. O
PERATION MENU
8. P
ICTURE MODE
9. S
OUND SYSTEM
10. P
ICTURE FREEZE
11. F
AST REVIEW
12. M
ONO/STEREO
13. T
ELETEXT CONTROL BUTTONS
.................................................................................................................................11
...................................................................................................................... 5
.................................................................................................................... 6
...................................................................................................... 7
............................................................................................................. 8
......................................................................................................................... 9
.............................................................................10
.............................................................................................................................10
...........................................................................................................................10
.........................................................................................................................10
..................................................................................................10
..........................................................................................................................11
..............................................................................................................................17
,............................................................................................................................17
.........................................................................................................................17
...............................................................................................................................17
/NICAM
SELECT
....................................................................................................17
........................................................................................................18
................................................................. 5
GENERAL SPECIFICATIONS
..................................................................................................19
SPECIFICATIONS FOR DIFFERENT SIZE AND CRUST
RGB FREQUENCY TABLE
.......................................................................................................23
1
.................................................20
Before Using This Product
Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and
property damage if improperly handled. This product has been engineered and manufactured
with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL
ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe
the following instructions when installing, operating and cleaning the product. To ensure your
safety and prolong the service life of your LCD TV product, please read the following
precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product
is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for
future reference.
3. Heed all warnings---All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5.Attachments---Only use attachments/accessories specified by the manufacturer. Do not use
attachments not recommended by the manufacturer. Use of improper attachments can result in accidents.
6. Power source---This product is intended to be supplied by a listed power supply indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system.
7.Power cord protection---Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8.Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
9.Entering of objects and liquids---Never insert an object into the product through vents or openings.
High voltage flows in the product, and inserting an object can cause electric shock and/or short internal
parts. For the same reason, do not spill water or liquid on the product.
10.Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
2
11.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the
AC outlet, and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper
adjustment of controls not described in the instructions can cause damage, which often requires extensive
adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any
noticeable abnormality in the product indicates that the product needs servicing.
12.Replacement parts---In case the product needs replacement parts, make sure that the service person
uses replacement parts specified by the manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other
danger.
13.Safety checks--- Upon completion of service or repair work, request the service technician to perform
safety checks to ensure that the product is in proper operating condition.
14.Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer. This is a safety feature.
15. Stand---Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. Do not place the product on an
unstable trolley, stand, tripod or table. Placing the product on an unstable base
can cause the product to fall, resulting in serious personal injuries as well as
damage to the product. When mounting the product on a wall, be sure to follow
the manufacturer.
16. Careful move--- When a cart is used, use caution when the cart/apparatus
combination to avoid injury from tip-over. Sudden stops, excessive force and
uneven floor surfaces can cause the product to fall from the trolley
17. Lightning---Unplug this apparatus during lightning storms or when
unused for long periods of time. For added protection for this television
equipment during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to the equipment due to lightning and
power-line surges.
3
18. Do not use this apparatus near water---for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool, and the like. Do not use immediately after moving from a low temperature
to high temperature environment, as this causes condensation, which may
result in fire, electric shock, or other hazards.
19. Clean only with dry cloth---Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
20. Ventilation---Do not block any ventilation openings. Install in accordance
with the manufacturer instructions. The vents and other openings in the
cabinet are designed for ventilation. Do not cover or block these vents and
openings since insufficient ventilation can cause overheating and/or shorten
the life of the product. Do not place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place
such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer
21.Heat sources---Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
22.Panel protection---The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or impacted upon by other
objects. Be careful not to be injured by broken glass pieces in case the LCD
panel breaks.
23.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
4
Introduction Your Television
Supplied Accessories
The following items come along with your LCD TV:
5
TV Control Functions
button (Beneath)
3 4 5 6 1
MENU SOURCE –VOL+ –P+ POWER
The LED indicator light up in 2 different colours green, red. Each colours
1 LED Indicators
2
3
4
5
6
POWER
P+
VOL+
SOURCE
MENU
represent different status.
Green - Power is on; Red - Standby.
Press this button to turn the power on/standby.
Press to change channel/when is menu mode, these acts as navigation
keys.
Press to adjust the volume/when is menu mode, these acts as navigation
keys.
Video input selection. Press this button to display the menu for input
selection mode.
Press this button to display the OSD menu.It contains all the options to
configure your TV's settings.
1
button (profile)
2
6
Setting Up the Remote Control
1. Open the lid of your remote control battery compartment on the back of the remote control.
-
Insert two AA batteries. Use the (+) and (
2.
correspond to the (+) marks on the compartment. The (
marks on the compartment.
Note: Do not mix new and old or different kind of batteries
) marks to guide
-
) marks on your battery correspond to the (-)
you. The (+) marks on your batteries
3. Put the lid back onto the remote control battery compartment.
7
Remote Control Functions
The table below explains each button’s function.
1 POWER
2
DISPLAY
3 I/II
4
ON/OFF TELETEXT ON/OFF button.
5 MIX
6 REVEAL
7 UPDATE TELETEXT UPDATE button.
8
VOL
9 PIC.MODE Picture mode button.
10 / 16
11 / 17
12 MENU
13
14 RECALL Recall last channel.
15
18 SOUND.SYS
19 MUTE
20
21
22 SUBPAGE
23 HOLD
24 INDEX
25 SIZE
26 FREEZE
27 SLEEP Activates the sleep timer.
28 SOURCE
0~9 Numerical keys to select desired channel
-/--
CH
Four color
buttons
8
Power on/off.
Press to display information about the
current source.
Mono/Stereo select button.
Switch to the teletext with mix mode
Show the hidden words
Volume DOWN/UP button.
Navigation
Navigation
Press this key to display the OSD menu. In
the OSD menu, press this key to exit the
menu.
Digital selection button.
Sound system select button.
Press this key to turn off the sound.
Press the "MUTE" button again or press
"VOL +" to enable sound.
Press
There are four color buttons and the colors sre
red, green, yellow, and blue from left to right. By
pressing these buttons, you can enter relative
pages fastly which is indicated in the last row of
current teletext page
Some page attach sub-page, press this button
to view sub page
Toggle hold on or off for current display page
Request index page
Change teletext display size
Press this key to freeze current frame from
the screen.
Press this key to display the video source
selection menu.
.
keys in Setup menu.
keys in Setup menu.
these keys to change the channels.
.
.
.
.
Inputs and Outputs
1 Tuner
75ohm
VD
VD
te
d
Your LCD TV has five types of video connections. You should capitalize on the best connection
available from your LCD TV to get the best display quality. For example, if you have a
progressive DVD player that supports a component video connection, you should connect the DVD player
to your LCD TV using component video connections instead of composite video or S-video
connections.
Available Interface
2 SCART1 input
3 SCART2 input
4 HDMI1 HDTV,Set-top Box, Progressive HD D
5 HDMI2 HDTV,Set-top Box, Progressive HD D
6 PC and Audio input
7 AV Inputs Contains S-video, composi
8 Component input Inputs Component support both High
Full SCART
Half SCART
video, a pair of R/L audio inputs.
Description
Recommended Devices
Player.
Player.
Definition programs 720p/1080i) an
standard definition programs (480i/ 480p)
9
Description of Operation
1. Power on/off
After power is connected, press power on/off button, and the power indicator will be on; if the
indicator is red, it indicates that the TV set is in the standby state. Press “Power” button on the
remote control, and the power indicator will turn green, so the TV set is on. Please disconnect
power supply before leaving the TV out of use for an extended period of time.
Note:
(1) In the TV signal mode, when there is no signal for 5 minutes or more, the TV set will
automatically access the standby state. If restart is required, please press “power” button or CH
“▼/▲” button on the remote control.
(2) Try not to repeat switching on/off the unit repeatedly within a short time.
2. Input switching
Press “Source” button to select the input signal with the switching sequence as
TV -- SCART1 – SCART2 AV Component HDMI1— HDMI2 PC
3. Volume control
Press the functional buttons on the panel or “VOL+ or VOL-” button on the remote control to
increase or decrease Volume. The volume control menu will be displayed on the screen.
4. Mute
displayed on the screen; press “MUTE” button or VOL+, VOL- button once again to cancel mute.
Press “Mute” button on the remote control to switch off sound, and the mute mark will be
5. Screen display of input signals
Press “DISPLAY” button on the remote control, and the current input signals will be displayed
on the screen. In several seconds, such display information will disappear automatically.
10
6. Sleep timer
Press “SLEEP” button on the remote control to be able to set the waiting time for the TV set to
automatically turn to the standby state. The current sleep time will be displayed on the screen (unit:
minute); to repeatedly press “SLEEP” button, you can select different times, with the switching
sequence as:
Off – 10 - 20- 30 – 40 – 50 – 60 – 70 – 80 – 90 – 100 – 110 - 120;
7. Operation menu
By using “MENU”, “► / ◄” or “▼/▲” button on the remote control or on the panel of the
host, you can regulate and set picture, sound, setup, search or PC signals. For details, please refer
to:
Menu operation:
(1) Selection and function operation of the setup menu
Press MENU button and the main menu will be displayed on the screen.
Press ► or ◄ until SETUP menu appears.
11
Press ▼/▲ to be able to select submenus (Yellow indicating right selection) on the SETUP
Menu. After you select the submenu, press ► / ◄ button once again to be able to regulate
different functions under this menu. For specific function adjustment, see the table below:
Submenu option ► / ◄ Prompt
Language Set menu language
Aspect Full screen – Full scene -- Zoom1 --
Zoom2 – Standard
3D NR Off L M H
TTX Language
Scart2 Input CVBS – Y/C
All Reset Restored to the factory default
West Europe- East
Europe-Russia-Arabic
state
Please note that this operation
will be invalid in the PC signal
mode
Select the teletext language
Press MENU button to be able to quit the current menu.
(2) Selection and function operation of the picture menu (Picture)
Press MENU button and the picture menu (Picture) will appear
Press ▼/▲button to be able to select the submenus (Yellow indicates the right selection) in
the picture menu. After the right submenu is selected, press ► / ◄ button once again to be able
to regulate different functions under this menu. For specific adjustments, refer to the table
below:
12
Submenu
options
Brightness Pictures become dim as a
whole
Contrast Reduce contrast between
brightness and dimness
Color Colors become weaker Colors become stronger
Tint Increase red and reduce
green
Sharpness Soft Sharp Normally set in the middle
Color
temp
Press MENU button to be able to exit the current menu.
(3) Selection and function operation of the sound menu (Sound)
◄ ► Prompt
Pictures become bright as
a whole
Increase contrast between
brightness and dimness
Increase green and reduce
red
Cold – Warm – Standard
Only adjustable when it is
NTSC in the signal system
position, functioning as to
be softer pictures by
reducing values or to be
clearer pictures by
increasing values.
Press MENU button, and the picture menu (Picture) will appear
Press ► /◄ until the sound menu (Sound) appears.
13
Press ▼/ ▲ to be able to select the submenus (Yellow indicates the right selection) in the
sound menu. After the right selection of the submenu, press ► / ◄ once again.
To press this button, you will be able to regulate different functions under this menu. For
specific adjustment of functions, refer to the table below:
Submenu
options
Volume Reduce the volume Increase the volume
Bass Reduce the bass volume Increase the bass volume
Treble Reduce the treble volume Increase the treble volume
Balance To regulate the balance between the right and left speakers
Surround To be able to select the surrounded effect of sound fields
AVL To automatically turn on/off volume
Equalizer To access the equalizer menu (For details, see the figure below)
◄ ► Prompt
Press MENU button to exit the current menu.
14
(4) Selection and function operation of Tune menu
Press MENU button, and the picture (Picture) menu appears
Press ► /◄ until the Tune menu (Tune) appears.
Press ▼/ ▲ to be able to select the submenus (Yellow indicates the right selection) on the
Tune menu (TUNE). After the right submenu is selected, press ► / ◄ once again.
To press this button, you will be able to adjust different functions under this menu. For the
adjustment of specific functions, refer to the table below:
Submenu options ► / ◄ MENU Prompt
Channel To decrease or increase frequency numbers
Skip To turn on/off frequency skip
Band To select bands: VHF L VHF H — UHF
Fine tune For fine tuning from low/high
Manual Scan Drop/rise in frequencies To stop manual scan
Auto Scan To start automatic scanning from current
channel position
Swap to To set frequency swap (For details, see the
figure below)
15
To stop automatic
scan
For example: If you want to swap between Channel 8 and Channel 12, the specific operations
are as follows:
a. First select “SWAP to” submenu according to the following steps ,
b. Press ► / ◄ button and the above Channel swap menu will appear.
Press ▼/▲button to select “Src Channel ” (Yellow indicates the right selection) in the
menu, and then press ► / ◄ button until the Channel number on the right skips to “8”;
Press ▼/▲button once again to select “ Tag Channel ” in the menu, and then press ► / ◄
button until the Channel number on the right skips to “12”.
c. Finally, press ▼/▲button to select the “ Exchange ” submenu. Then press ► / ◄ again to
complete the swap between Channel 8 and Channel 12.
(5) Selection and function operation of PC Menu (PC Setup)
(Please note: To select the PC Menu, you will have to ensure that the current signal mode is PC)
Press “MENU” button, and the picture menu (Picture) will appear
Press ► /◄ until the PC menu (PC) appears
Press ▼/ ▲ button to be able to select submenus in the PC Menu (PC) (Yellow indicates
the right selection). After the right submenu is selected, press ► / ◄ button once again to be
able to adjust different functions under this menu. For the adjustment of specific functions,
refer to the table below:
16
Submenu
options
Auto Adjust To automatically set up the positions of pictures
H-Position To adjust the horizontal positions of pictures to move
V-Position The vertical pictures move up/down
Phase To adjust phases
Clock To adjust the clock
◄
left/right
►
Prompt
8. Picture mode
Press “PIC.MODE” picture mode button on the remote control to be able to select from
different picture modes, at the sequence of soft – Standard – Vivid – User – PC. (Note: The “PC”
mode functions only when the signal source is selected at PC).
9. Sound system,
Press “
SOUND.SYS
MBGDKI.
10. Picture Freeze
Press “ Freeze ” button on the remote control to still the picture when you want.
11. Fast review
While watching TV, press “ RECALL ” button on the remote control to be able to return to the
TV program you previously watched. If you select no other program after the unit is switched on, it
will be invalid to press this button.
12. Mono/Stereo/NICAM select
” button on the remote control to be able to adjust the sound system:
Depending on the particular program being broadcast, Press “I/II” button you can listen to
Mono/Stereo/NICAM/A2 sound mode.
17
13. Teletext control buttons
Below is a guide to the functions of the remote control teletext buttons
(1). Teletext ON/OFF control
To view teletext press “ON/OFF” button .Press again to return to normal broadcast
viewing .Program can not be changed until teletext is cancelled.
(2). Teletext INDEX page display control
Press “ INDEX ” to return to the index/initial page.
(3). Teletext MIX page display control
Press “ MIX ” to superimpose teletext over a normal broadcast picture. Press again to return
to normal TV viewing.
(4). Reveal concealed text in the Teletext page
Press “ Reveal ” to To discover the solutions on quiz and joke pages.
(5). Hold a wanted page
At times it is convenient to hold a page of text. Press “ HOLD ” and the page will be held
on screen until the button is pressed again.
(6). To enlarge the teletext display size
Press “SIZE” once to enlarge the top half of the page, press again to enlarge the bottom half
of the page. Press again to revert to normal size.
(7). Red / Green / Yellow / Blue buttons
In FASTEXT or TOP mode these correspond to the differently coloured subjects.In List mode
they correspond to the differently coloured page numbers.
(8). Page Numbers Up and Down
The “▼/▲” button are used to move to higher or lower page numbers.
(9). Page Number buttons
The “ 0 – 9 ” digit buttons allow you to directly enter the page number that you want to view.
(10). SubPage button
Press SUBPAGE button.Enter directly the subpage number you want with the remote control
NUMBER 0...9 buttons : for example to enter the 2nd page, sequence 0002.
(11). Update buttons
Press UPDATE button. Then TV programme appears on screen and the teletext symbol
appears at the top of the screen. When teletext programme will be updated, concerned page
number appears on screen. Note that TV programme cannot be changed with UPDATE button
activated. Pressing the UPDATE button again, the teletext page appears with the updated
information
18
General Specifications
Screen Size 26" / 32” / 37” / 42” diagonal
LCD Panel
Resolution WXGA (H) 1366 X (V) 768pixels
Display Color 16, 777, 216 Color
Aspect Ratio 169 WIDE
Input/Output
Audio
Compatibility
Compatibility
Video in
Y / Pb/Cb / Pr/Cr
SCART in
RGB Video + Audio in
HDMI in
Antenna input
Built-in speaker
Color Temperature Normal/Warm/Cool
Progressive Scan
3-2 pull down
Color system
SDTV/HDTV
PC
Operative temperature
Storage temperature
1 Vp-p/75
Y 1 Vp-p/75
SCART X 2 (SCART1:Full; SCART2: CVBS + YC)
VGA X 1 + Phone Jack X 1
HDMI X 2
75
8W X 2
Yes
Yes
PAL, NTSC, SECAM
480i, 480p, 576i, 576p, 1080i, 720p
VGA/SVGA/XGA
32°F ~ +105°F
14°F ~ +120° F
, L/R Audio 20K
, Cb/Pb / Cr/Pr 1±0.3 Vp-p/75 , L/R Audio
19
Specifications for different size and crust
26”
Power
AC 100~240V,
*1 (W) 27.56 X (D) 8.50 X (H) 22.13 inch (with speaker/stand)
130W
Dimension
Net Weight
*2 (W) 27.56 X (D) 8.31 X (H) 24.20 inch (with speaker/stand)
*3 (W) 27.56 X (D) 8.31 X (H) 24.20 inch (with speaker/stand)
*1 14.0kg
*2 15.0kg
*3 15.0kg
*1 *2
*3
20
32”
Power
AC 100~240V,
*1 (W) 32.32 X (D) 9.45 X (H) 24.49 inch (with speaker/stand)
*2 (W) 32.32 X (D) 10.43 X (H) 24.70 inch (with speaker/stand)
190W
Dimension
Net Weight
*3 (W) 32.32 X (D) 10.43 X (H) 24.60 inch (with speaker/stand)
*4 (W) 40.31 X (D) 10.43 X (H) 23.39 inch (with speaker/stand)
*5 (W) 40.31 X (D) 10.43 X (H) 23.39 inch (with speaker/stand)
*1 17.5kg
*2 18.0kg
*3 18.0kg
*4 19.0kg
*5 19.0kg
*1 *2
*3 *4
*5
21
37”
Power
AC 100~240V,
*1 (W) 37.32 X (D) 9.45 X (H) 27.28 inch (with speaker/stand)
220W
Dimension
Net Weight
42”
Power
*2 (W) 37.32 X (D) 10.61 X (H) 29.80 inch (with speaker/stand)
*3 (W) 37.32 X (D) 10.61 X (H) 29.80 inch (with speaker/stand)
*1 25.8kg
*2 25.5kg
*3 25.5kg
*1 *2 *3
AC 100~240V,
260W
Dimension
Net Weight
*1 (W) 40.25 X (D) 10.30 X (H) 29.30 inch (with speaker/stand)
*2 (W) 42.05 X (D) 12.20 X (H) 31.61 inch (with speaker/stand)
*1 28.0kg
*2 27.0kg
*1
22
*2
RGB Frequency Table
The table below shows the frequency ranges supported by the LCD TV. It supports from
VGA to XGA.If you are connecting your PC to the LCD TV via the RGB port, please use the following table in
order to setup your PC’s VGA output for maximum optimization.
Source
HDMI input
Component
(Y/PbCb/PrCr)
PC input
Resolution
480i / P
576i / P
1080i
720p
480i / P
576i / p
1080i
720p
640 x 480
800 x 600
Vertical Frequency
60
50
50 / 60
50 / 60
60
60
50 / 60
50 / 60
59.94
72.81
75.00
85.01
56.25
60.32
70.10
72.19
75.00
85.06
60.00
70.07
1024 x 768
1280 x 768
1360 x 768
75.03
85.00
60.00
60.00
23
Loading...