Power for iPod
Step 1: Charge Power for iPod
1. Connect Power for iPod to USB charger cable.
Step 2: Charge your iPod
1. Connect Power for iPod to DC output cable
BUP-0203
User Manual
3100554060
Vers ion 1. 0
Jun.
Thanks for purchasing this product. Please read this
user manual carefully before usage.
**Attention:
Keep this product away from water and rain.
Keep this product away from fire.
Keep this product away from solvents.
Do not store in high temperature environment.
Do not dissemble this product.
Use only manufacturer-approved accessories.
200
7
Voltage: 5V
Current: 500 mA
Temperature: Under
o
C
45
2. Connect the USB charger cable to USB port on
your computer or laptop.
3. Please charge Power for iPod for 3-4 hours.
During charging, the LED will remain red. When
fully charged, the LED indicator will turn green.
**Attention:
1. Please charge Power for iPod before first
time use.
2. Please charge Power for iPod again when it
is not used for 3 months. Power for iPod
will discharge automatically when not in
use for a long period of time.
3. The LED indicator will turn red showing
that Power for iPod is in low power and
needs to be charged.
2. Connect DC output cable to your iPod.
3. You can now start to enjoy your extended iPod
entertainment.
DISCLAIMER
Whilst every effort has been made to ensure that the
information in this manual is accurate and complete,
no liability will be accepted for any errors and/or
omissions made. The manufacturer reserves the right
to make changes and improvements to the
specifications and features of the hardware of the
products described in this document without prior
notice. Reproduction, transfer, distribution or storage
of part or all of the contents in this document in any
form is prohibited without prior permission of the
manufacturer. All trademarks acknowledged.
Loading...