Empress Effects tremolo User Manual

user manual

tremolo

Introduction

The Empress Tremolo is an original design built from the ground up
to include innovative features without sacrificing tone. The audio
signal path is analog, but the tremolo effect is controlled digitally via
opto technology.

We’ve included features never before seen on a tremolo, including

tap tempo and rhythm features, that expand upon the basic effect
increasing its functionality and ease of use.

To help you get the most out of this product, we’ve put some brief

instructional videos on our website:

www.empresseffects.com

Enjoy,

Steve Bragg

Quickstart

Plug your guitar into the jack on the right side. Plug your amplifier

into the jack on the left side. Set the mode switch to “tap tempo”

and set the waveform switch to “tube”. Set depth to half, rate to
1:2, rhythm to 1 (all the way counterclockwise), and gain to one
half. Now tap the tempo you would like using the tap stomp
switch.

There’s your standard tremolo.