!! ALL TOPS ARE DRILLED FOR 8” FAUCET SPREAD !!
1. Granites are solid tops - ¾” thick
• OGee edge surrounds the 3 sides, the bowl cut-out and the top of backsplash.
• 4” backsplash is packed loose in every carton.
• A bag of 4 clips and screws is packed in every carton (only for tops that do not have a bowl
installed onto them). The underside of top has 4 female screws embedded.
• Oval bowl cut-outs for K2210 or K2209 only (or equivalents), depending on model !
2. Truffle marble tops –
• OGee edge surrounds the 3 sides, the bowl cut-out and the top of backsplash.
• 4” backsplash is packed loose in every carton.
• Construction: truffle rectangular pieces
not solid; seams are visible. The top is well constructed and sealed.
• A bag of 4 clips and screws is packed in every carton (only for tops that do not have a bowl
installed onto them). The underside of top has 4 female screws embedded.
• Oval bowl cut-outs for K2210 or K2209 only (or equivalents), depending on model !
3. Cream solid marble tops – 1 ¼” thick
• OGee edge surrounds the 3 sides, the bowl cut-out and the top of backsplash.
• 4” backsplash is packed loose in every carton.
• Construction: ¼” of solid Crème Marfel marble on top of 1” plywood. The top is
well constructed and sealed.
• A bag of 4 clips and screws is packed in every carton (only for tops that do not have a bowl
installed onto them). The underside of top has 4 female screws embedded.
• Oval bowl cut-outs for K2210 or K2209 only (or equivalents), depending on model !
4. OLYMPIC 1 5/8” Carrera White solid marble tops –
• NO OGee edge, NO backsplash. Top part is routed out about 1/8” with a small lip.
• A bag of 4 clips and screws is packed in every carton (only for tops that do not have a bowl
installed onto them). The underside of top has 4 female screws embedded.
• Oval bowl cut-outs for K2210 (or equivalent )
• Underside of faucet area is routed out to accept the faucet parts.
¾” thick
on top of ½” plywood. The top marble surface is
1 5/8” thick
5. EURO solid Granite & Marble tops –
• Eased edge on all 4 sides, bowl cut-out and backsplash
• 4” backsplash is packed loose in every carton.
• A bag of 4 clips and screws is packed in every carton (only for tops that do not have a bowl
installed onto them). The underside of top has 4 female screws embedded.
• Rectangular cut-out (18”x12”)
1 ¼” thick NEW