Empire Industries 50 User Manual

800 243 4844

[e-mail]

FIG. 50

standard riser clamp

B

A

Materials/Finishes

Variants:

Service:

Approvals:

Ordering:

Notes:

Plain Carbon Steel (50B) Electro-Galvanized (50G)

Hot-Dip Galvanized (50HDG) Plastic Coated (50PC)

T-304 Stainless (50SS) T-316 Stainless (50SX)

Pipe Gard (50PG) - Please contact factory for details.

T-304 Stainless for DIP sizes (50DIPSS)

T-316 Stainless for DIP sizes (50DIPSX)

Designed for supporting and stabilizing vertical pipe runs.

U.L. - U.L.C. listed (sizes 2” - 8”). Complies with Federal Speci­cation WW-H-171-E (Type# 8), A-A-1192 A (Type# 8) and
Manufacturers’ Standardization Society MSS SP-58 and SP-69
(Type# 8).

Specify gure number, nish and pipe size.

Available in steel (50) and Ductile Iron Pipe (50DIP) Sizes.
Plastic coated riser clamps are completely plastic coated with
zinc plated hardware. e plastic coating prevents pipe from
coming in contact with the clamp and is designed to reduce
noise, vibration and prevent electrolysis between pipe and clamp.
Stainless steel riser clamps are recommended for applications
where protection from a corrosive environment is required.

PIPE
SIZE
(IPS)

1/2
3/4

1-1/4
1-1/2

2-1/2

3-1/2

PIPEODBO LT A B WGT

0.840

1.050

1

1.315

1.660

1.900

2

2.375

2.875

3

3.500

4.000

4

4.500

5

5.563

6

6.625

8

8.625

10

10.750

12

12.750

14

14.000

16

16.000

18

18.000

20

20.000

24

24.000

30

30.000

3/8
3/8
3/8

3/8
3/8
3/8

3/8
3/8
1/2

1/2
1/2
1/2

5/8
5/8
5/8

5/8
3/4
3/4
3/4
7/8
7/8

8-5/8

8-13/16

9-1/16

9-7/16

10

10-9/16

11-1/8

11-13/16

12-3/4

13-5/8
14-1/8
15-3/8

18-5/8
21-1/4
22-3/4

24
26
28
30
36
42

2-1/8

2-5/16

2-5/8

2-15/16

3-7/16

4

4-9/16

5-1/4
5-3/4

6-5/8
7-5/8
8-7/8

12
14-3/4
16-3/4

17-7/8

21
23-1/8

25
29-1/4
35-1/4

EACH

(LBS)

0.88

0.92

0.94

1.00

1.04

1.14

1.60

1.70

2.06

2.20

3.40

3.72

7.22

10.94

16.10

17.00

29.16

31.91

35.00

42.00

60.00

MAX

REC

LOAD

(LBS)

255
255
255

255
255
300

400
530
670

810
1500
1600

2500
2500
2700

2700
2900
2900
2900
2900
3200

PROJECT INFORMATION APPROVAL STAMP

Project: Notes:

Address:

Contractor:

Engineer:

Date:

Approved Approved as Noted Not Approved