Empire LRP1-100 User Manual

Single Door
Item No.
Project
Quantity
BakerSeries Roll-in Proofer MODEL: LRP1 Series
Construction Features
.
Heavy duty stainless steel exterior with 300 Series
stainless steel interior and aluminized steel top
.
Walls Ceilings and door are foam insulated
.
Modular wall and ceiling panels with cam lock construction
.
Rapid responding air-wash heat and humidity system
.
208/120 or 240/120 VAC single or 3-phase power, field convertible
Performance Features
.
70 - 120 Degree F proofing range
.
50 - 99% humidity range
.
Non-submerged calrod type heaters
.
Interior bumpers protect interior walls from damage
.
Lighted interior
MODEL / RACK CAPACITY
Controls Features
.
All digital controls mounted in the door at eye-level
.
PID Type controls for rapid accurate response without overshoot
.
5 timers for multiple products
.
Digital set Temperature, Humidity, Time
.
Large LED displays
humidity system; modular foam insulated cam lock panel construction; all
protective bar handle; simple computerized controls, door mounted at eye-
level, with accurate digital temperature, humidity and time readouts; plus
Sheet Number LRP1- 13 (rev 11/12)
Roll-In Proofer
LRP-1 Series
Construction Features
Heavy duty stainless steel exterior with
300 Series stainless steel interior and aluminized top
Walls Ceilings and door are foam insulated Modular wall and ceiling panels with cam
lock construction
Rapid responding air-wash heat and
humidity system
208/240 VAC single or 3-phase power, eld
convertible
Performance Features
damage
Lighted interior
Controls Features
All digital controls mounted in the door at
eye-level
PID Type controls for rapid accurate
response without overshoot
5 timers for multiple products Digital set Temperature, Humidity, Time Large LED displays
Model / Depth Side Load End Load Double
LRP1-40 1 Rack 1 Rack None LRP1-50 2 Racks 1 Rack 1 Rack
LRP1-60 2 Racks 2 Racks 1 Rack
LRP1-70
LRP1-80 LRP1-90 LRP1-100 LRP1-110 LRP1-120
Short Bid Specification:
Proofer shall be an LBC Bakery Equipment Model LRP1- [insert 40,50,60,70,80, 90,100,110,120] 5 to 6.6 kW electrically heated, single door roll-in rack unit with: quick responding air-wash heat /
Model LRP1-40 Shown
3 Racks 2 Racks 1 Rack
3-Racks 3 Racks 1 Racks 4 Racks 4 Racks 2 Racks 4 Racks 4 Racks 2 Racks 5 Racks 4 Racks 2 Racks 5 Racks 5 Racks 3 Racks
300 series stainless steel interior, with protective cart bumpers; heavy­duty door with magnetic seal/mechanical closure system and full width
all the features listed and options checked.
1C Enterprise Place, Hicksville, NY 11801-5356 Ph: (516) 681-1500 Fx: (516) 681-1510
1-800-878-4070 www.empirebake.com Email: info@empirebake.com
Technical Data
Roll-In Proofer
MODEL: LRP1 Series
INSTALLATION REQUIREMENT
OPTIONS & ACCESSORIES
Unit
Value
Unit
Value
LRP1-0414
Ships KD requires on-site installation 208 or 240 VAC 1-phase or 3-phase 3/4" Copper vented drain connection
Stainless Steel Floor
Depth
Model
LRP1-40 38.3 892 992 LRP1-50 38.3 991 1116 LRP1-60 38.3 1094 1219 LRP1-70 38.3 1197 1322 LRP1-80 38.3 1321 1446 LRP1-90 38.3 1424 1549 LRP1-100 38.3 1527 1652 LRP1-110 38.3 1651 1776 LRP1-120 38.3 1754 1879
Model Voltage
208 VAC 30 20 50 50
LRP1-(40 -120)
240 VAC 35 20 50 50
Internal "A"
32.1
42.1
52.1
62.1
72.1
82.1
92.1
102.1
112.1
Total Electrical Requirements By Model
Total kW
5
6.6
Ext. "B"
41 51 61 71 81
91 101 111 121
*MCA
1-Ph 3-PH 1-Ph 3-Ph
1/2" NPT Cold water connection
Over All "C"
49.3
59.3
69.3
79.3
89.3
99.3
109.3
119.3
129.3
*Max Fuse
Width
1/2" NPT .07
GPM @ 60 PSI
Weight
Actual Ship
Water
1/2"PVC; 210 F;
<1 GPM Max.
Freight
Class
85
Drain
This Appliance is designed to operate at normal room temperatures. Clearance from combustibles is
*MCA: Minimum Circuit Ampacity. *Max Fuse: Maximum allowable circuit protector.
IMPORTANT: Your local water conditions may damage your LBC appliance. Failure to properly treat water may
result in damage and may void your warranty. Ensure that your water supply meets these minimum specification.
Parameter Parameter
Alkalinity Aluminium Calsium Free Chlorine Residual
0.0" sides and back, For Install on non-porous surfaces only
ppm 22 ppm 0.65 ppb 17 s.u. 8.5 ppm 3.3 ppm 8.5 ppm 0.6 ppm 11.9
Magnesium pH Sodium Total Hardness
1C Enterprise Place, Hicksville, NY 11801-5356 Ph: (516) 681-1500 Fx: (516) 681-1510
1-800-878-4070 www.empirebake.com Email: info@empirebake.com
Loading...