Empire LMO-G8-N-S User Manual

Gas Half

Item No.

Project

Quantity

BakerSeries Gas "Mini" Rotating Rack Oven MODEL: LMO-G - Series

Construction Features

.

Heavy duty stainless steel interior and exterior

.

Vertical Tube Heat-exchanger

.

150 Lbs. Thermal Mass

.

Low pressure water injection steam system

.

6" Exhaust collar for "B" type vent, or direct vent under hood

.

Field connection point for hood proving switch*

.

Unison opening split doors

.

Hinged inner glass window for easy cleaning

.

Full perimeter silicone door seal

.

Mechanical door latch with magnetic closer

Performance Features

.

90,000 Btu/Hr burner system

.

0.75 GPH water delivery system

.

10/20 second normal steam time

.

Safety limited torque drive rotation system

.

Low noise circulation system

.

Brightly lit interior

.

Fast acting programmable vent

Controls Features

.

Large LED display for time, temperature and steam

.

Simple manual setting for temperature, time, steam

.

Manual one-touch venting control

.

Manual blower one-touch delay or pulse blower

.

Storage for up-to 99 programmed recipes

.

6-button quick access recipe menu

* The Commonwealth of Massachusetts requires that the gas

flow must be prohibited when the exhaust hood is not

operational.

on natural gas or propane gas [specify at time of order]. The oven shall

BTU/Hr. using an in-shot burner system and shall have heat exchanger

Meets ANSI Z83.11 and NSF-4

Sheet Number LMO-G v10 (rev05/13)

operational.

Meets ANSI Z83.11 and NSF-4

Rack Oven

Construction Features

♦ Heavy duty stainless steel interior and

exterior

♦ Incoloy sheathed heater elements
♦ 150 Lbs. Thermal Mass
♦ Low pressure water injection steam system
♦ Unison opening split door
♦ Hinged inner glass window for easy cleaning
♦ Full perimeter silicone door seal
♦ Mechanical door latch with magnetic closer
♦ Field connection point for hood proving

switch

Performance Features

♦ Fast acting heater elements
♦ 0.75 GPH water delivery system
♦ 10/20 second normal steam time
♦ Safety limited torque drive rotation system
♦ Low noise air circulation system
♦ Brightly lit interior
♦ Fast acting programmable vent

Controls Features

♦ Large LED display for time, temperature

and steam

♦ Simple manual setting for temperature,

time, steam

♦ Manual one-touch venting control
♦ Manual blower one-touch delay or pulse

blower

♦ Storage for up-to 99 programmed recipes

Pan Bread 16oz Loaves

Short Bid Specification:

Oven shall be LBC Mini Rotating Rack Oven, model no. LMO-G [insert
6-N, 6-LP, 8-N, 8-LP, 6S-N, 6S-LP, 8S-N, 8S-LP, 10S-N, 10S-LP] with
capacity for 6, 8 or 10 - 18" x 26" sheet pans. The oven shall operate

have an internal steam system consisting of 150 pounds of steel bars
and a water drop system that dispenses water to the steel mass
through multiple large holes in a stainless steel tube located over the
steel mass. The oven shall be indirectly fired at a rate of 90,000

Model LMO-G8-N-S Shown

18 x 26 Sheet Pans

12" x 20" Hotel Pans

8 Oz. Baguettes

Cookies 2 oz.

♦ 6-button quick access recipe menu

tubes that are mounted vertically so as to utilize natural draft for
combustion air intake and exhaust. The oven shall be mounted on a
stainless steel stand having front mounted heavy duty locking swivel
casters and rear mounted stationary locking casters or shall be
mounted on 8" stainless steel legs. The oven shall have an optional
proofer base having front mounted heavy duty locking swivel casters
and rear mounted stationary locking casters.

LMO-G

LMO-G6 LMO-G8 LMO-G10

6 8 10

6 8 0

30 N/A N/A

30 40 N/A

12 Doz. 16 Doz. 20 Doz.

1C Enterprise Place, Hicksville, NY 11801-5356 Ph: [phone] Fx: [phone]

1-800-878-4070 www.empirebake.com Email: [e-mail]

Technical Data

BakerSeries "Mini" Rotating Rack Oven

MODEL: LMO-G - Series

OPTIONS & ACCESSORIES

S-19 19" Stand 70315-01 Draft Inducer Kit

BakerSeries "Mini" Rotating Rack Oven

MODEL: LMO-G - Series

OPTIONS & ACCESSORIES

Stand with Rack Slides 6-Pan Rack @ 5.5" 10-Pan Rack @ 3.3" Gas Connection Kit
Proofer Base 60-Recipe Controller Water Connection Kit
S-19 19" Stand 70315-01 Draft Inducer Kit

LP

8-Pan Rack @ 4"

Product of combustion must be vented to the outside

INSTALLATION REQUIREMENT

Venting: Type "B" vent, 6" Dia. When used with approved draft inducer LBC Part No.70314-01. Alternate; May

be mounted under an approved Type I or II hood, provided there are 18" of clearance between the exhaust collar
and the hood filters. Consult all State, and local codes.

Note: When a hood or powered ventilation system is used for products of combustion, an interlock, such as
contact points or air-flow proving switch, is required. Consult installation instructions for connection information.

Ships Full Assembled, will fit through 40" Opening with out removal of door
Remove door, hinges and latch for movement through 38" clear opening

Clearance to Combustible

Air Gap routed from

11"-14" WC at all times

MODEL: LMO-G - Series

8-Pan Rack @ 4"

MODEL: LMO-G - Series

8-Pan Rack @ 4"

INSTALLATION REQUIREMENT

Ships Full Assembled, will fit through 40" Opening with out removal of door
Remove door, hinges and latch for movement through 38" clear opening
Product of combustion must be vented to the outside
Venting: Type "B" vent, 6" Dia. When used with approved draft inducer LBC Part No.70314-01. Alternate; May
be mounted under an approved Type I or II hood, provided there are 18" of clearance between the exhaust collar
and the hood filters. Consult all State, and local codes.

Note: When a hood or powered ventilation system is used for products of combustion, an interlock, such as
contact points or air-flow proving switch, is required. Consult installation instructions for connection information.

Stand with Rack Slides 6-Pan Rack @ 5.5" 10-Pan Rack @ 3.3" Gas Connection Kit
Proofer Base 60-Recipe Controller Water Connection Kit

8-Pan Rack @ 4"

LMO-G-0314

Model H W D Weight

LMO-G
With Stand

Model Drain

120 VAC 15 Amp Dedicated Circuit

LMO-G

56.06" 43.75" 41.75"

85.13" 43.75" 41.75"

Electrical Requirements Gas

NEMA 5-15R

surfaces

0" Back and Sides 18" Top 1225 85

1/2" NPT Supply Line

90,000 BTU/HR

Nat

5"-14" WC at all times

Freight Class

Water

3/8" Cold Water

Supply

0.75 GPM @ 20
PSI

rear of appliance

1C Enterprise Place, Hicksville, NY 11801-5356 Ph: [phone] Fx: [phone]

1-800-878-4070 www.empirebake.com Email: [e-mail]