Important Safety Precautions and Explanation of Symbols
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important installation, operation, and service instructions in this manual.
!
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltages within the enclosure that may be of sucient magnitude to
constitute a risk of electrical shock to the user.
Please read this manual thoroughly before attempting to install, congure, or operate the BASX power
amplier. After successful installation and conguration of the BASX power amplier, be sure to retain this
manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read and follow all
instructions and heed all warnings on the BASX amplier and in this manual. The vast majority of the
subsequent safety precautions are common sense. If you are not comfortable with the installation of audio/
video entertainment equipment, you should seek the services of a qualied installation professional or call
us for help.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THE BASX AMPLIFIER
NEAR WATER OR IN WET LOCATIONS, DO NOT EXPOSE IT TO RAIN OR MOISTURE, DO NOT EXPOSE IT
!
TO DRIPPING OR SPLASHING FROM OTHER SOURCES, AND ENSURE THAT NO OBJECTS FILLED WITH
LIQUIDS SUCH AS VASES ARE PLACED ON IT. DOING SO MAY RESULT IN DAMAGE TO THE UNIT AND
THE RISK OF ELECTRIC SHOCK, WHICH MAY RESULT IN BODILY INJURY OR DEATH.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER FROM THE
BASX AMPLIFIER. THERE ARE NO USERSERVICEABLE PARTS INSIDE THE UNIT. REFER ALL SERVICE TO
QUALIFIED SERVICE PERSONNEL.
Do not install the BASX amplier near or above any heat sources such as radiators, heating vents, or other
apparatus’ that produce heat. Do not block any ventilation openings or heat sinks. Avoid installing the
unit directly above other heat-producing equipment unless sucient ventilation or forced-air cooling is
provided.
Do not install the BASX amplier in locations without proper ventilation. The BASX should not be operated
on a bed, sofa, rug, or similar surface that may block vents. The unit should not be installed in an enclosed
location such as a bookcase, cabinet, or closed equipment rack unless sucient forced-air ventilation is
provided.
Always install your BASX amplier according to the manufacturer’s instructions and only use attachments
or accessories specied by the manufacturer.
Do not install the BASX amplier on any stand, shelf, or other piece of furniture that is unable to support its
weight. If a cart is used to move the unit, use caution to avoid injury from tip-over.
Connect the BASX amplier only to power sources of the correct voltage (as shown in this manual and on
the BASX amplier unit).
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be especially careful
where the power cable enters the power outlet and the unit.
Only connect the BASX amplier to an electrical outlet or extension cord of appropriate type and rating.
DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground pins or using
unsafe adapters. A polarized plug has two blades - one wider than the other. A grounding plug has a
third ground prong in addition to the two main conductors. The wide blade or third groundling prong is
provided for your safety. If the provided plug does not t your outlet, consult an electrician to replace your
obsolete outlet. If you replace the power cord, only use one of similar type and equal or greater current
rating.
The power cable for the BASX amplier should be unplugged from the outlet during severe electrical storms, or
when unused for a long period of time.
Only replace the fuse(s) in the BASX amplier with fuse(s) of proper value and voltage rating.
The BASX should only be cleaned as directed in the manual. Avoid spraying liquids directly onto the unit and
!
NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the inside of the
unit.
You should seek service for your BASX amplier by qualied service personnel if any of the following occur:
!
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The unit has been exposed to rain.
4. The unit exhibits a marked change in performance.
5. The unit has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE BASX AMPLIFIER FROM THE AC POWER MAINS, DISCONNECT THE AC
POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE POWER CORD ON THE BASX AMPLIFIER MUST REMAIN READILY ACCESSIBLE AT ALL TIMES.
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
BASX A-150/ A-300 / A-500 / A-700
BASX A-150 / A-300 / A-500 / A-700 Power Ampliers
Contents
Important Safety Precautions and Explanation of Symbols
BASX A-150 / A-300 / A-500 / A-700 Power Ampliers ...................................... 1
Introduction ......................................................................................................................3
About This Manual .......................................................................................................... 4
Features ..............................................................................................................................5
Unpacking ..........................................................................................................................6
BASX A-150 / A-300 / A-500 / A-700 .......................................................................... 7
BASX A-150 / A-300 / A-500 / A-700 Front Panel ..................................................8
BASX A-150 / A-300 / A-500 / A-700 Rear Panel ....................................................9
Quick Start ...................................................................................................................... 11
Connections ................................................................................................................... 12
Care and Maintenance ............................................................................................... 13
Specications ................................................................................................................. 14
Troubleshooting ........................................................................................................... 17
Emotiva Audio Corporation Three-Year Limited Warranty ............................ 18
Accessories ..................................................................................................................... 21
Notes ................................................................................................................................. 22
Page 1
BASX A-150/ A-300 / A-500 / A-700
Page 2
BASX A-150/ A-300 / A-500 / A-700
Introduction
Thank you for purchasing one of our new Emotiva BASX power ampliers.
Our BASX product line is dedicated to the philosophy that high-quality products that deliver true
audiophile sound quality don’t need to be expensive to buy or complicated to congure and enjoy.
Our BASX power ampliers give you great sound quality, excellent technical performance, and
outstanding value.
The BASX amps use a “classical audiophile architecture”, centered around a heavy-duty linear
power supply, class A/B amplication, and the high current capability you need to sound great
with even dicult to drive speakers. We’ve paid special attention to important details like heavyduty audiophile grade binding posts and carefully laid out signal paths. And we’ve also included
important high-end features like dierential inputs, automatic line voltage detection, and
microprocessor controlled status indicators and fault protection.
If you need superb sound, excellent build quality, and outstanding value, then you’ve come to the
right place - Emotiva BASX.
Happy listening!
The Emotiva Team
Page 3
BASX A-150/ A-300 / A-500 / A-700
About This Manual
This manual will provide you with the information you need to get started enjoying your
BASX power amplier.
We suggest that you read through the entire manual; we kept things as short and direct as
possible. Even if you’re an expert user, you will probably nd some interesting information and
useful suggestions.
If you’re really in a hurry to get started, please read the Quick Start section (on page 11); you may
then read the remainder of the manual at your leisure.
You may wish to keep a copy of this manual with your records, and record serial numbers or other
purchase information on the Notes page at the back.
Page 4
BASX A-150/ A-300 / A-500 / A-700
Features
The BASX series are audiophile-grade power ampliers that provide up to seven channels of
superb quality audio amplication. All of the BASX power ampliers feature our fully discrete,
high-current, short signal path class A/B output section, and heavy duty linear power supplies.
Welcome to the BASX series of power ampliers... proof that you can still get true audiophile
sound quality, all the power you need to get great sound from even dicult to drive speakers,
and real value... all in an attractive, well made package.
Features of the new BASX series power ampliers:
• True audiophile-quality sound - as with all of our ampliers, the BASX power amps were
designed rst and foremost to sound superb in all types of audio systems.
• Great sounding Class A/B output stage - ensures smooth detailed sound and incredibly
natural imaging - without a trace of harshness or strain.
• Heavy duty linear power supply - with an oversized toroidal power transformer and plenty
of current capacity to drive even dicult speakers.
• Top quality parts and construction throughout - promise years of reliable service.
• Totally stable - designed for use in the real world, with real speakers.
• Heavy steel 2RU chassis with milled aluminum face plate - provide strength and rugged
good looks.
• Heavy duty insulated ve-way speaker binding posts - allow you to use a wide range of
speaker cables with bare wires, lugs, or banana plugs.
• Remote trigger input and output - allow the BASX power amps to be turned on by trigger-
enabled equipment, and to activate other trigger-enabled equipment.
• Audiophile-grade fault protection - entirely transparent under normal conditions, yet
protects the amp and your other equipment from all common fault conditions.
• Universal AC line voltage operation - the BASX power amps are designed to operate on
either 115 VAC or 230 VAC at 50/60 Hz, and automatically detect and congure themselves to
operate with your local line voltage.
• Standard IEC power inlet (BASX A-300, BASX A-500, BASX A-700) - ts all standard and
audiophile IEC power cables.
• Full three year warranty - ensures that you’ll be able to enjoy your BASX power amp for
years to come.
You can nd more information about the entire BASX line of products on our website at
www.emotiva.com.
Page 5
BASX A-150/ A-300 / A-500 / A-700
Unpacking
Your BASX power amplier was carefully packed and should reach you in perfect condition. If
you notice any shipping damage or other issues when you unpack it, please contact Emotiva
immediately.
Gently remove your BASX power amp from the packing carton and remove all wrappings and
shipping material.
It is important to save the box and all packing materials in case your power amp ever needs to be
moved or shipped back to the factory for service.
We truly value customer feedback and would like to hear from you.
Page 6
BASX A-150/ A-300 / A-500 / A-700
BASX A-150 / A-300 / A-500 / A-700
A-300
A-150
A-150
AC INPUT
A-300
A-500
A-700
A-500
A-700
LS
RBS
RS
CH 7
RF
CH 6
CH 5
LF
C
CH 3
CH 4
LBS
CH 2
CH 1
Page 7
BASX A-150/ A-300 / A-500 / A-700
BASX A-150 / A-300 / A-500 / A-700 Front Panel
A-500
1 2
Note: The BASX A-150, BASX A-300, BASX A-500, and BASX A-700 have identical features and
controls, and dier only in the power and number of amplier channels they provide. The
BASX A-500 is shown here for illustration.
1. Standby Button
Press to switch the amplier On; press again to return to Standby; the halo ring around the button
illuminates amber for Standby and blue for On.
Note: In order for the BASX amplier to operate, the rear panel AC Power Switch must rst be
turned On.
2. Status Display Window
This window houses the status LEDs.
Note: The Status LEDs can be disabled by the Status LEDs switch on the rear panel.
Note: In Standby mode the halo ring on the Standby button will be illuminated in amber and
the Status LEDs are not lit; in normal operation the Status LEDs and Standby button are both
illuminated in blue; one or both Status LEDs ashing red indicates a channel fault.
Note: Each BASX amplier model has one corresponding Status LED for each channel.
Press to switch the amplier On; press again to return to Standby; the halo ring around the button
will illuminate amber for Standby and blue for On.
Note: In order for the BASX power amp to operate, the rear panel AC Power Switch must rst be
turned On.
Page 8
BASX A-150/ A-300 / A-500 / A-700
BASX A-150 / A-300 / A-500 / A-700 Rear Panel
1 32
4
6
Note: The BASX A-150, BASX A-300, BASX A-500, and BASX A-700 have identical features and
controls, and dier only in the power and number of amplier channels they provide. The
BASX A-500 is shown here for illustration.
5
7
1. Trigger Input and Trigger Output
The BASX power amplier is switched On (from Standby) when a trigger signal is presented at
the Trigger Input; the BASX power amp returns to Standby when the trigger signal is removed.
When the BASX power amp is on, a 12 VDC signal is sent from the Trigger Output to control other
devices.
2. Status LEDs Switch
Disables the front panel status LEDs when set to O.
3. Unbalanced Inputs
The BASX power amplier has independent unbalanced inputs for each channel.
Note: Even though we’ve labelled the channels, all of the channels on the BASX power amp are
the same, so you don’t have to use the channels as labelled if you prefer not to.
4. AC Power Voltage LEDs
The BASX power amps are designed to operate on either 115 VAC or 230 VAC, and automatically
detect and congure themselves to operate with your local line voltage. These LEDs tell you
which line voltage the BASX amplier has detected.
Page 9
BASX A-150/ A-300 / A-500 / A-700
5. AC Power Switch
Switches the main AC power to the BASX power amp On and O. When this switch is O, no
controls operate (the BASX power amp cannot be turned On from the front panel or by a trigger
signal).
6. Speaker Terminals
The speaker outputs on the BASX power amp are heavy duty ve-way binding posts, which
accept a variety of speaker cables - including those with banana plugs, spade lugs, or bare ends.
7. IEC Power Cord Receptacle
The BASX power amp can be powered by any receptacle that provides either 115 VAC or 230 VAC
at 50/60 Hz. This receptacle accepts a standard removable IEC AC power cable (a high-quality
commercial power cable is included).
Page 10
BASX A-150/ A-300 / A-500 / A-700
Quick Start
To get the most from your BASX power amplier we urge you to read the entire manual. If you just
can’t wait to listen to it, this section will cover the basics you need to get started.
• Find a secure location for your BASX power amplier.
• Connect your BASX power amplier to a signal source.
• Connect your BASX power amplier to a set of speakers (4 ohm or 8 ohm) using reasonably
heavy gauge speaker wires (at least 16 gauge).
• Find some music you really like to listen to.
• Turn on the AC Power switch and turn up the volume a bit!
• Enjoy!
While you’re enjoying your BASX power amplier, it would be a great time to read the rest of the
manual to learn more about it.
Page 11
BASX A-150/ A-300 / A-500 / A-700
Connections
Connecting speakers to your BASX power amplier
Your BASX power amplier has no special connection requirements; audiophile grade ve-way
binding posts are provided for speaker connections.
• Always turn o the amplier before connecting or disconnecting speaker cables or signal
source interconnects.
• Always verify that your speaker cables are rmly attached, and not shorted to each other or
to any other cables, before powering up your BASX power amplier.
• Always use high-quality speaker wire; 16-gauge or heavier.
• If you must use thinner wire, try to keep the length as short as possible.
• Be careful to wire all speakers “in phase” (the plus/red terminal on each speaker to the plus/
red terminal on your amp).
• Try to use wires of equal length and gauge for both speakers in each pair (use the same gauge
and length for both fronts, or for both surrounds; don’t use a long 16-gauge wire for one
speaker and a short 10-gauge wire for the other).
• If you use stranded cables, use care to avoid short circuits (from stray strands touching).
• Emotiva oers very high-quality, pre-made speaker cables at reasonable prices.
You will nd them in the Interconnects section of our website at www.emotiva.com.
Connecting an input source to your BASX power amplier
Your BASX power amplier uses unbalanced (RCA) inputs. We suggest using reasonably high
quality cables, keeping cables no longer than necessary, and avoiding running signal cables near
power cables and speaker cables whenever possible.
DO NOT connect a digital signal to the inputs of your BASX power amplier (or you may damage it
or your speakers).
Connecting the Trigger Input and Trigger Output
The Trigger Input accepts a 12 VDC (nominal) trigger signal from another device via a standard
1/8” mono plug. When the trigger is asserted, the BASX power amplier will switch On; when
the trigger is removed, the BASX power amp will return to Standby mode. The Trigger Output
sends out 12 VDC whenever the main power to the BASX power amp is On (and NOT when it is in
Standby mode) which can be used to switch on other units with trigger capabilities.
Line Voltage
The BASX power amp can be powered by any receptacle that provides either 115 VAC or 230 VAC
at 50/60 Hz. The BASX power amp will automatically detect the correct line voltage. The AC Power
Voltage LEDs will indicate which line voltage the BASX power amp has detected.
Page 12
BASX A-150/ A-300 / A-500 / A-700
Care and Maintenance
Periodic Maintenance
Your BASX power amplier requires no periodic maintenance or calibration.
Cleaning your BASX power amplier
• If necessary, the BASX power amplier should be cleaned gently with a soft rag.
• If something sticky gets on the front panel or case of the BASX power amp, it should be
cleaned with a mild cleaning solution applied to a soft rag, followed by wiping with a clean
rag dampened with plain water and drying with a soft dry rag or cloth.
Note: DO NOT spray water or cleaning solution directly onto the BASX power amplier or into
the vents.
Page 13
BASX A-150/ A-300 / A-500 / A-700
Specications
Note: The following specications apply to all four models
(BASX A-150, BASX A-300, BASX A-500, BASX A-700) unless otherwise noted.
Power Output
Power Output Per Channel; two channels driven.
BASX A-150: 75 watts RMS / channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms
BASX A-300: 150 watts RMS / channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms
BASX A-500: 110 watts RMS / channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms
BASX A-700: 110 watts RMS / channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms
Power Bandwidth (at rated power; 8 Ohm load)
20 Hz to 20 kHz (+ / - 0.07 dB).
Broad Band Frequency Response
5 Hz to 80 kHz (+ 0 / - 1.8 dB).
THD + noise
< 0.02% (A-weighted); at rated power; 1 kHz; 8 Ohms
Signal to Noise Ratio (8 Ohm load)
> 120 dB; ref rated power (A-weighted).
> 100 dB; ref 1 watt (A-weighted).
Minimum Recommended Load Impedance
4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads.
Damping Factor (8 Ohm load)
> 500.
Speaker Output Connections
Audiophile grade 5-way binding posts.
Power Supply
Linear power supply with heavy duty toroidal transformer.
Page 14
BASX A-150/ A-300 / A-500 / A-700
Input Sensitivity (for rated power; 8 Ohm load)
1.2 V.
Gain
29 dB.
Input Connections
Unbalanced (RCA); one each per channel.
Input Impedance
27 kOhms.
Trigger
Trigger Input: 5 - 12 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 120 mA.
Power Requirements
115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).
Front Panel Controls and Indicators
Standby; push button (halo ring changes color to indicate Standby or On).
Status LEDs; one per channel; blue.
Status LEDs change to red to indicate a fault condition.
Rear Panel Controls
AC Power switch; rocker switch (switches AC main power).
Status LEDs switch; disables front panel Status LEDs.
Protection
The BASX power amplier is protected against excessive operating temperature, shorted speaker
connections, ground faults, and other common fault conditions.
Page 15
BASX A-150/ A-300 / A-500 / A-700
Dimensions:
BASX A-150:
17” wide x 3-1/8” high x 13-1/2” deep (unboxed; including feet).
17” wide x 2-1/2” high x 13-1/2” deep (unboxed; without feet).
21-1/2” wide 7” high x 21-1/4” deep (boxed).
BASX A-300, BASX A-500, BASX A-700:
17” wide x 4” high x 16” deep (unboxed; including feet).
17” wide x 3-1/2” high x 16” deep (unboxed; without feet).
21-1/2” wide 8” high x 21-1/4” deep (boxed).
Weight
BASX A-150: 15.5 lbs (unboxed)
BASX A-300: 25.2 lbs (unboxed)
BASX A-500: 24.25 lbs (unboxed)
BASX A-700: 29.4 lbs (unboxed)
* For boxed weight, add 6.4 lbs to the above weights
Page 16
BASX A-150/ A-300 / A-500 / A-700
Troubleshooting
Your BASX power amplier was carefully designed and manufactured from high-quality precision
components to ensure years of trouble free operation. We really doubt you’ll ever have any
problems with your BASX power amp, but if you do, here are a few things you could try:
Problem: No output (nothing is lit).
Reason: You have no AC power.
• Verify that the rear panel AC Power switch is On.
• Verify that your circuit is live.
• Verify that the line cord on your BASX power amp is fully inserted and is tight.
Problem: Your BASX power amp is operating normally, but none of the front panel
Status LEDs is lit.
Reason: The front panel status LEDs are turned o.
• Set the Status LEDs switch on the rear panel to On.
Problem: No sound or distorted sound is heard; the Standby button halo is lit blue;
the status LEDs are lit blue.
Reason: Your BASX power amp is not indicating a fault condition.
• Check your source.
• Check your speakers and speaker connections.
Problem: No sound is heard; one or more Status LEDs is ashing red.
Reason: Your BASX power amp is in Protect mode, which indicates a fault condition.
• Switch the rear panel AC Power switch O and On to clear the Fault condition.
• If the fault remains, look for a shorted speaker cable or damaged speaker.
• Check your sources and source connections (a bad interconnect, DC on the input,
or an otherwise bad source component can cause a fault).
Problem: The halo around the Standby button is lit amber and your BASX power amp
fails to come on when triggered.
Reason: Your BASX power amp is in Standby mode and should respond to a valid trigger signal.
• Check your trigger cable.
• Check the trigger settings on your source equipment.
Page 17
BASX A-150/ A-300 / A-500 / A-700
Emotiva Audio Corporation Three-Year Limited Warranty
What does this warranty cover?
Emotiva Audio Corporation (Emotiva) warrants its products against defects in materials and
workmanship. This warranty, and all rights provided hereunder, is limited to the original owner. In
the event the original owner transfers ownership of the Product after the rst year of ownership,
but prior to the expiration of the applicable term described below, this Warranty shall terminate
immediately upon such transfer of ownership.
This Warranty only applies to Products purchased directly from Emotiva or any of its Authorized
Dealers or International Distributors.
Emotiva warrants any replacement product or part furnished hereunder against defects in
materials and workmanship for the longer of the following: (i) the amount of time remaining
under the original warranty, or (ii) 120 days from your receipt of the repaired or replaced product.
The duration described in this paragraph is hereinafter referred to as the “Term”.
TO THE FULLEST EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES RELATED TO THE
ORIGINAL PRODUCT AND ANY REPLACEMENT PRODUCT OR PARTS (INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE EXPRESSLY
LIMITED TO THE TERM OF THIS LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU.
The original owner must make a claim within the Term of the Warranty. A claim shall not be valid
(and Emotiva has no obligation related to the claim) if it is not made within the Term and if it is not
made in strict compliance with the requirements of the “How do you get service?” section.
How long does this coverage last?
This warranty commences on the date of retail purchase by the original retail purchaser and runs
for a period of three years thereafter, with the exception of accessories, cables, Big Ego, Little Ego,
remote controls, and the ERC-3 CD transport mechanism*. This warranty may be transferred once
by the original owner during the initial one year of ownership, and is non-transferable thereafter
to the original or subsequent owner during the Term. Emotiva warrants any replacement product
or part furnished hereunder against defects in materials and workmanship for the longer of the
following: (i) the amount of time remaining under the original warranty, or (ii) 120 days from your
receipt of the repaired or replaced product. The duration described in this paragraph is hereinafter
referred to as the “Term”.
*Accessories, cables, Big Ego, Little Ego, and remote controls have a one-year warranty to the
original owner. The CD transport mechanism on the ERC-3 has a two-year warranty to the original
owner.
Page 18
BASX A-150/ A-300 / A-500 / A-700
What will Emotiva do?
Emotiva will, at its option, either: (i) repair the product, or (ii) replace the product with a new
consumer product which is identical or reasonably equivalent (in Warrantor’s sole discretion) to
the product. In the event Warrantor, in its sole discretion, is unable to replace or repair the Product
or it is not commercially practicable to do so, then: (i) if the claim was submitted during the rst
365 days of the Term, Warrantor shall refund to you the purchase price that you paid for the
Product; and (ii) if the claim was submitted after the rst 365 days of the Term, Emotiva shall issue
you a credit equal to the purchase price that you paid for the product. The credit may only be
used for the purchase of merchandise from Emotiva, and cannot be used for freight charges.
When a Product or part is repaired or replaced, any replacement item becomes your property
and the replaced item becomes Emotiva’s property. When a refund or credit is given, the Product
for which the refund or credit is provided must be returned to Emotiva and becomes Emotiva’s
property.
What is not covered by this warranty?
This warranty does not apply: (i) to damage caused by use with products not manufactured
by Emotiva, where the non-Emotiva product is the cause of the damage; (ii) to damage caused
by service or maintenance performed by anyone who is not a representative of Emotiva; (iii) to
damage caused by accident, abuse, misuse, ood, re, earthquake or other external causes; (iv) to
a product or part that has been modied after its retail purchase, where the modication caused
or contributed to the damage; (v) to consumable parts, such as batteries or failure of or damage
to the Product caused by batteries; (vi) if any Emotiva serial number has been removed or defaced
on the product; (vii) glass or plastic panels, cabinetry, trim or other appearance items; (viii)
cosmetic wear or damage to remote controls by user.
EMOTIVA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
FROM OR RELATED TO ANY DEFECTS IN OR DAMAGES TO ITS PRODUCTS. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
How do you get service?
In order to make a claim under the Warranty, you must:
1. Call or e-mail a customer service representative at 1-877-EMO-TECH (1-877-366-8324) or
support@emotiva.com. You must provide a description of your problem, the serial number of the
Product for which the warranty claim is being made, and the original purchase date.
2. Then, you will be provided with a warranty service authorization number (“WS”).
Page 19
BASX A-150/ A-300 / A-500 / A-700
3. Next, you must ship the Product to the following address, with the WS written in large, bold
numbers on the outside of the box, and with the letters “WS” written before the number, for
example: WS1234. Parcels arriving without a WS number on the outside of the box will be refused.
The customer pays for the shipping to Warrantor. Warrantor pays for the shipping back to the
customer within the continental United States only. Customer is responsible for shipping charges
on all other warranty claims.
Emotiva Audio Corporation
Attn: Repair Department
139 Southeast Parkway Court
Franklin, TN 37064
Units will be refused by Emotiva for the following:
Product was sent without the WS#
Product was sent with inadequate packaging.
Product was damaged in transit.
Product was shipped collect for shipping charges.
How does state law apply?
This warranty gives you specic legal rights, and you may also have other rights which vary from
state to state.
What if my product is damaged on the way to you?
Emotiva is not liable for damages that may incur while an item is in transport to us. Please
purchase insurance when you ship your item. If your Product was not adequately packaged, we
will refuse receipt and the damaged package will be returned to you at your cost. If you do not
have the original Emotiva Audio packaging, please check with our sales department to purchase
replacement-shipping cartons.
How does the Warranty and service apply to international orders?
The Product Warranty is only valid in the country where the Emotiva product was originally
shipped via an authorized dealer, distributor, or direct from the Emotiva factory. The Warranty is
subject to change at any time depending on the laws and regulations within your specic country.
Please check with your distributor for a complete understanding of the warranty in your county.
If you purchased your Emotiva Product outside of the USA and wish to have it serviced at the
factory, all freight charges are your responsibility. If you do not have an authorized distributor
or repair center in your country, your Product must come back to the Emotiva USA factory for
warranty service.
Page 20
BASX A-150/ A-300 / A-500 / A-700
Accessories
Speaker Cables and Interconnects
Using high-quality speaker cables and audio interconnects will ensure that you get the best
sound quality and maximum reliability from your BASX power amplier and the speakers
connected to it. Emotiva Audio oers high-quality speaker cables and audio interconnects that
feature solid engineering, premium build quality, excellent performance, and reasonable cost.
You will nd both on our website at www.emotiva.com.
Page 21
Notes
BASX A-150/ A-300 / A-500 / A-700
All information contained in this manual is accurate to the best of our knowledge at the
time of publication. In keeping with our policy of ongoing product improvement, we reserve the
right to make changes to the design and features of our products without prior notice.
User Manual Revision 1.1 November 2016
Page 22
Loading...