Premium Whirlpool
Operating and Installation Instructions
Ladies and Gentlemen,
Thank you for choosing our product.
Prior to installing the product and the initial start-up, please take some time
to read this manual carefully to familiarize yourself with the safety aspects.
Please open the package (wooden crate) using a cordless screw driver
(TX20 bit).
Please save the crate until the whirlpool has been tested and installed.
If you have any questions or suggestions concerning your new hot tub,
feel free to use our customer hotline. Hotline: 020 - 34 99 50 19
TABLE OF CONTENTS
Safety instructions ................................................................................................ 4
Care and maintenance ........................................................................................ 4
Part names ........................................................................................................... 5-6
Specications and installation .................................................................... 7-8
Operating instructions .................................................................................9-10
Initial start-up / test run .................................................................................. 11
Final assembly ...............................................................................................12-15
INCLUDED IN THE SHIPMENT
WITH YOUR WHIRLPOOL
1 x waterfall spout and gasket (optional)
1x handheld shower head attachment (optional)
1x mounting material for the skirt, incl. wall mount
1x siphon / odor eliminator
4
SAFETY INSTRUCTIONS
1. Children or anyone needing assistance should not use the whirlpool spa
without supervision. People with heart conditions, high blood pressure
or diabetes or other serious illnesses should exercise increased caution or
consult a doctor before using the whirlpool tub.
2. Alcohol consumption or high levels of physical exhaustion may
represent a hazard during use.
3. Caution – Danger of slipping when entering and exiting the whirlpool tub.
Please note that there may be an increased risk of slipping due to residues
of bath additives on the tub bottom.
4. All water connections and electrical work must be performed by a specialist.
5. The water pump is equipped with dry-run protection and can only
be placed in operation when the water level sensors are covered with water.
6. The water pump, air pump and ozone generator require air circulation to
ensure heat dissipation. If you decide to tile the whirlpool tub, please ensure
adequate ventilation.
CARE AND MAINTENANCE
1. We recommend the use of 2000 grit sandpaper for the removal of
supercial scratches. Afterwards, the sanded surface must be polished.
2. For cleaning the hot tub surfaces, only use cleaners suitable for the
maintenance of sanitary-grade acrylic.
3. Do not use acidic or alkaline cleaning agents.
4. If the bottom air nozzles, side jets, back jets and the suction ttings are
clogged with hair etc., they can be unscrewed and cleaned.
5
3-unit xtures (optional)
Waterfall (optional)
Handheld shower head
(optional)
Side jets and suction tting
Drain and bottom
air nozzles
PART NAMES (Features may vary depending on the conguration.)