Emmepi WOK-70, 702-M-I-D, 702-M-I, 704-M-I, ESWOK-70 Installation, Operating And Maintenance Instructions

INSTALLATION, OPERATING

AND MAINTENANCE INSTRUCTIONS

700 PROFESSIONAL

mixerset07

cat n° 38

INDUCTION COOKERS

V 400 / 3

GB

WOK-70 702-M-I-D 702-M-I 704-M-I

ESWOK-70 ES702-M-I-D ES702-M-I ES704-M-I

WOK-70-2P WOK-70-6K WOK-70-3K

702-IND-7K 702-IND-12K 702-IMD-3K 702-IND-6K

Page 2

CONTENTS

System plans Page 3
General instructions Page 6

I. INSTALLATION INSTRUCTIONS

1. Installation instructions Page 7

1.1 Technical plate Page 7

1.2 Technical data Page 8

1.3 Technical features Page 9

1.4 General notes at delivery Page 9

1.5 Handling Page 9

1.6 Packaging Page 9

1.7 First start Page 9

2. Electric safety standards Page 9

3. Electric connection Page 10

II. OPERATING INSTRUCTIONS

1. Induction generator Page 11

1.1 Fields of use Page 11

1.2 Caution! Hazard! Page 11

1.3 Personnel qualification and training Page 11

1.4 Hazards caused by failure to observe the safety regulations Page 11

1.5 Safe usage Page 11

1.6 Safety of the user or personnel responsible for use Page 11

1.7 Safety of the personnel responsible for use Page 12

1.8 Safety during installation, maintenance and controls Page 12

1.9 Reproduction or use of unauthorised spare parts Page 12

1.10 Improper usage Page 12

III. ELECTRIC OVEN OPERATING INSTRUCTIONS

1. Product - Technical data Page 13

1.1 Description of the product Page 13

1.2 Type and technical data Page 13

1.3 Running Page 13

2. Certifications Page 14

3. Transport Page 14

4. Installation Page 14

5. Pots and pans Page 14

6. Starting up Page 15

7. Switch off Page 15

8. Cleaning and maintenance Page 15

8.1 Cleaning the glass Page 15

9. Procedure to follow if the appliance is not going to be used for some time Page 15

10. Procedure to follow in the event of a breakdown Page 16

11. Assistance Page 17

12. Spare parts Page 17

13. Junk removal Page 17

Page 3

SYSTEMS PLAN

= V 400-3N

( WOK-70, 702-M-I-D, 702-M-I, 704-M-I )

Page 4

( ESWOK-70, ES702-M-I-D, ES702-M-I, ES704-M-I )

= V 400-3N

Page 5

= V 400-3N

( WOK-70-2P, WOK-70-6K, WOK-70-3K, 702-IND-7K, 702-IND-12K, 702-IND-3K, 702-IND-6K )

Page 6

GENERAL INSTRUCTIONS

• Read the instructions contained in this booklet carefully as they provide important
information to ensure safe installation, use and maintenance.

• Keep this booklet for any further reference by the operators.

• After removing the packing, check that the appliance is not damaged.

• Should you have any doubts, don’t use the appliance and address to skilled technicians.

• Never leave the packing components (plastic bags, foamed polystyrene, nails, etc.) within the
reach of children since they are a source of potential danger.

• Before connecting the appliance check that the specifications indicated on the data plate (Pic. 1)
correspond to those indicated on the electrical mains system.

• The appliance should be used by trained personnel only.

• Before carrying out any cleaning or maintenance operations, insulate the appliance from the
electrical mains system.

• In case of damage or malfunctioning, always disconnect the appliance.

• Any repair intervention should be carried out only by an authorized after-sale servicing centre.

• Always request the use of original spare parts.

• The non-compliance with the above mentioned instructions may compromise the safety of the
appliance.

• This appliance must be used for the purpose for which it was designed.

• The installation should be carried out by qualified personnel in compliance with the instructions
provided by the manufacturer and with the regulations in force.

• Never wash the appliance with direct high-pressure bolts of water.

• Don’t obstruct the openings and the heat inlets and outlets.

• Always keep all the appliance elements clean to avoid any risk of corrosion or any damage by
irritating agent.

• Always disconnect the appliance when it is not in use.

• Electric safety of this appliance is assured only when it is properly connected to an efficient
earthing system, as provided by the electric safety regulations in force.

• It is necessary to check this basic safety qualification of the system by highly skilled personnel.
The manufacturer cannot be considered responsible for any damages caused by the non-earthing
of the installation.

• As for the electric system it is necessary to provide for a switch having a controls opening
distance equal or superior to 3 mm: for example:

- manual switch of proper capacity equipped with plug fuses;

- automatic switch with proper magnetothermic relays.

• The appliance is to be furthermore included in an equipotential system, whose efficiency must be
checked following the regulations in force.

• The connection is made by a ven marked by " Equipotential "

• The trailing cable for the connection to the electric line should have lower characteristics than the
one with H07RN-F rubber insulation.