1
OPERATIONAL MANUAL
EMKP-8001
180 Zones Paging Microphone
Version 1.4
2
Product Overview
The EMKP-8001 is a 180 zones digital paging microphone. As the name digital paging microphone, EMKP-8001
operates digitally. On each paging microphone it is possible to select 180zones with the possibility to connect
up to 30 paging console by using single CAT-5E extension cable. Through a 4X20 characters LCD panel on top
of the paging console is used for showing more reliable information such as selected zone, type of chime,
priority and other user is on call on the moment. Furthermore, this EMKP-8001 equipped with a cardioid
condenser microphone which offers minimum sensitivity at an angle of 180 degrees, reducing pick up of
sounds from the rear. It’s also tightly controlled unidirectional polar pattern provides excellent ambient noise
control allowing the wanted speech stand out from the background of noisy confusion and features selectable
microphone gain output. Because the digital paging console provides a balanced line level output, it can be
positioned up to 1.2KM away from the zone selector.
3
Features.
• Built-in microchip controller compile all the features into a single device
• A LCD 4 X 20CH with blue back light to display system status, zones settings and grouping function
• Simple keypad layout make operation simple and user friendly
• Appropriate for a system less than 180zones.
• Allowed data communication distance up to 1.2KM.
• Instead of analogue system, digital system can avoid complicated hardwire configuration by using
single CAT5E cable which carrier balanced audio signal, power and data.
• Built-in 8 type of chime with volume gain at the bottom of the console.
• Preset call duration limit from 1 to 10minute to avoid accidently pressed or overlook after used.
• CALL function either can be set in toggle or momentary mode (Press-To-Talk).
• One touch emergency button to override the entire paging console during emergency.
• 9nos of grouping can be saved and recalled from the internal memory.
• By pressing the Synchronize button and send all the setting to other EMKP-8001 except priority level.
• Cardiod condenser microphone with tightly controlled unidirectional polar pattern provides excellent
ambient noise control allowing the wanted speech stand out from the background of noisy confusion.
• Adjustable Microphone sensitivity at the rear of the microphone.
• Easily being integrated with EMIX range public address equipment.
4
Top View and Rear View
Figure 1.1 Top view of the digital paging console
Figure 1.2 Rear view of the paging console
5
Figure 1.3: Bottom view of the Digital Paging Microphone
6
Keypad and Rear Panel Indication
EMKP-8001 Digital Paging Microphone
1.1 Keypad Indicator
1
LCD Display
– 4 X 20 Characters LCD to display system status & message easy for reading. Zones setting
and zone grouping are displayed in multi pages for easy viewing
2
Keypad
– The large 24 labeled matrix buttons make operation simple & user friendly.
3
Page Up
– Navigation key for page menu and configuration selection. For example, current page is
zone 11 to zone 20, after button pressed will be switched to zone 1 to zone 10. For configuration
selection, the menu will be switched reversely when button pressed.
Used as primarily (next page) as parameter setting button too.
4
Page Down
– Navigation key for page menu and configuration selection. For example, current page is
zone 1 to zone 10, after button pressed will be switched to zone 11 to zone 20. For configuration
selection, the menu will be switched forwardly when button pressed.
Used primarily (previous page) as parameter setting button too.
5
Emergency
– To activate immediate paging. When button pressed, all zones will be selected
automatically.
6
Call
– To activate paging after zone selection. Used as primarily (Enter) as parameter setting button
too.
7
Clear All
– To clear all selected zone.
8
Priority
– To enter priority setting menu.
9
Select All
– To select all zones.
10
PTT
– To enter paging mode configuration. 2 configurations are included which is Push to Talk
(momentary) mode and Toggle mode (Push to on & push to off).
11
Synchronize
– To synchronize group memory or device setting.
12
Chime
– To enter chime configuration. 7 types chime configuration included.
13
Save
– To save zones group. Maximum 10 setting can be saved.
14
Delay
– Delay (Paging countdown timer) is an added feature which able to prevent unwanted paging.
User might not deactivate the device after paging and this causes unwanted paging. By setting Delay,
the device will automatically deactivate when the delay period is time out.
15
Load
– To load saved zones group. Maximum 10 setting can be loaded.
7
16
Zone Selection
– To select zone within every page menu. 1 page contain 10zones for example 1st page
is zone 1 to zone 10, press
Page Down (3)
will be next 10 zones
e.g.
zone 11 to zone 20.
1.2 Rear Panel indicator
17
Mic sensitivity
– To adjust microphone sensitivity.
18
Communication Port
– This RJ45 socket accepts the CAT5 straight cable connected to EMZS-8006 6CH
speaker zone selector and EMZS-8012 12CH speaker zone selector. It also can be linked to extension
unit.
1.3 Bottom Panel indicator
19
Chime Volume
– To adjust the chime volume.
8
2.0 Installation Diagram / Schematic Diagram
Figure 1.3: There are 4nos of 180zones paging console connected up with 2nos of 12CH Zone selector
EMZS-8012 through RJ45 to line converter. All of the paging consoles have a loop through connection
from the last paging console to zone selector. From the single line shown above, there is total 7nodes
taken up for the system.
Notes: Maximum 32nos nodes can be connected up.
3.0 Unit Setup - Zone c
onfiguration
Press Zone button
to enter zone setting
Figure: Zone setting. By default, number of zone is set to 180 zones.
Press Page Up or Page Down button
Figure: Page Down button pressed
Figure: Page Down button
pressed again
Once total number of zone is confirmed
You are able to view total 3 pages o
f zoning from zone 1 to zone 30 after chosen as the diagram shown above
Notes:
This setting must be done
paging.
menu as below:-
to select total usage number of zone in the system
, pressed CALL button (Enter)
to reduce the hassle of
too many pages exists when
Pages &
Page 01 :
Page 02 :
Page 03 :
Page 04 :
Page 05 :
Page 06 :
Page 07 :
Page 08 :
Page 09 :
Page 10 :
Page 11 :
Page 12 :
Page 13 :
Page 14 :
Page 15 :
Page 16 :
Page 17 :
Page 18 :
9
operator making
Number of Zone:
1-10 Zones
11-20 Zones
1-30 Zones
1-40 Zones
1-50 Zones
1-60 Zones
1-70 Zones
1-80 Zones
1-90 Zones
1-100 Zones
1-110 Zones
1-120 Zones
1-130 Zones
1-140 Zones
1-150 Zones
1-160 Zones
1-170 Zones
1-180 Zones
3.1 Unit Setup -
Delay (Paging period timer) configuration
The purpose of setting up the timeout delay to prevent the microphone accidently turned on and left
unoccupied after an announcement has been made.
Press
Delay
button
to enter delay period setting:
Press Up or
Down
button to select your timeout delay
Notes: If no entry is made within 10seconds,
front page.
Once confirm the Timeout delay setting
the setup menu shall exit automatically and return to the
press
CALL
button it will result as below:
-
10
3.2 Unit Setup -
Chime configuration
This unit has built-in 7type of
different
menu.
Press
Chime
button
to enter Chime setting:
Press Up or
Down
button to select your desire chime.
Once confirm the chime setting
by user, kindly
chime, usually user given to choose their desire of chime through this
press
CALL
button it will shown as below:
11
-
3.3 Unit Setup -
PTT configuration
To select momentary (press
to talk) or toggle press to on and press to off when the user used for paging.
Press
PTT
button
to enter paging mode configuration:
Press Up or
Down
button to select your toggle or momentary when paging.
Once confirm the PTT setting press
CALL
Notes: Manufacturing default Setting will be always on Toggle mode where the user need to press the
CALL button for paging and press the CALL button to end the calling.
button it will shown as below:-
12
3.4 Unit Setup - Priority
configuration
This is to set the priority
level of the paging microphone.
priority.
Press
Priority
button
to set device priority:
Once confirm the Priority level setting press
Notes:
Manufacturing default Setting will be always
Priority 1st
is the highest while 7th
CALL
button it will shown as below:-
set on 1st
Priority Setting.
13
is the lowest
3.5 Unit Setup - Group SAVE
setting
Zone grouping consider a pre-
configured action which means user can select the require zone and
selected zone together.
enable easy access to a group of zone when paging.
Kindly select the preferred
channel where you wish to get
Press [
Save
+ no.1] button
at the same time
Which means Zone 01, 02, 03, 04 & 05 are grouped together in Group 1.
Press [
Save
+ no.8] button
at the same time
Notes: Repeat the step shown above to program other grouping.
3.6 Unit Setup – Group LOAD
setting
Zones grouping that had been grouped during the earlier stage
Press [
Load
button and no.1]
at the same time to load saved zone groups from particular memory:
Kindly find the groups setting
shown below
After p
erforming a load function from the paging console of recall from
press the
CALL
button to perform paging.
-
together into same group.
to save zones group
as shown below to
to save zones group
as shown below to memory 8:
and this
can be recall back
which has been saved in memory 1.
Group 1 consists of zone 1, 2, 3, 4 & 5
14
group the
memory 1:
for paging purpose.
,
3.7 Unit Setup - Synchronize
setting
Press
SYNC
button
to synchronize device setting with other devices.
select for synchronize:
Press numeric keypad [No.1 or No.
2
]
Press
No.1
button on the numeric keypad to synchronize group of zone for paging
transfer to other linked up digital paging console
Example of application:-
All lobbies of different floors can be merged under single group to allow simultaneous paging to
entire floor.
Press
No.2
button on the numeric keypad to synchronize group of zone for paging
Delay time, Chime type & PTT
settings will be transfer to other linked up digital paging console.
There are 2
different
to select which setti
ng is wanted to be sending to another paging
15
settings for user to
console.
. The saved groups will be
the
. The saved setting such as
4.0 -
Emergency (Immediate) paging
To do immediate paging,
user has to press
will be activated once
EMER
but
ton has been pressed:
Notes: This is the highest priority, no matter what is your paging console priority level setting was set
the previous setting.
4.1 Other - Paging Console
Paging console priority no.3 itself is doing announcement through the digital paging console.
4.2 Other - Paging Console
When there is another p
aging console
announcement through the system.
This digital paging console LCD will show up a Funnel where
does not allow to do calling or paging at this moment.
EMERGENCY
. All zones will be automatically selected and paging
higher priority (no.1) than the current
paging console
16
on
making
by the user
17
Technical Specifications
Input voltage 24VDC
Max. Power consumption 100mA
Zoning Capacity >180Zones
Data Communication RS485 protocol
Input connectors Double RJ-45, via CAT-5 cable
Operation distance up to 1.2KM data communication
Chimes Settings 8nos type of chime selection
Display 4 x 20CH LCD with blue back light
Frequency response 100 Hz to 12 KHz
S/N ratio >60dB
Grouping Capacity 9nos groups, each group can be store up to 180 zones
Microphone Condenser Type
Output impedance Audio signal Balanced, 600Ω
Output level Audio signal Balanced, 0-700mV
Output Dry contact N.A
Output Gain control Chime volume & adjustable gain for Microphone
Microphone length 400mm (excluded paging console)
Dimension (W x H x D) 400 x 105 x 230mm
Gross Weight 1.75 kg
Net Weight 1.6 kg
18
Only EMIX Technical Service Centers are allowed to make warranty repairs. Send the equipment directly to AV
Electronics Marketing Sdn Bhd, or contact us for a list of Emix Technical Centers. This warranty is not valid if
repairs are performed by unauthorized personnel or service centers.
This warranty covers only repairs and replacement of defective parts. Costs and risk of transportation as well
as removal and installation of the product/equipment from the main system are to be borne by the purchaser.
This warranty shall not extend to the replacement of the unit.
This warranty does not cover damages caused by misuse, neglect, accident of the products as well as using the
product with power supply voltage other than shown on the product, or any other power supply source /
adaptor not recommended by the manufacturer. This warranty does not cover damages caused by fire,
earthquakes, floods, lightning and every cause not directly related to the unit.
This warranty does not include any indemnity in favor of the purchaser or the dealer for the period of use of
the unit; moreover the warranty does not cover any damages which may be caused to people and things when
using the products.
This warranty certificate is valid only for the described product, and is valid for a period of 12 months from the
date of purchase or for a longer period in countries where this is stated by a national law. In this case, the
extension is valid only in the country where the product is purchased.
AV ELECTRONICS MARKETING SDN BHD is not obliged to modify previously manufactured products under
warranty if the design changes or improvements are made.
Information contained in this manual is subject to change without prior notice and does not represent a
commitment on the part of the vendor. AV ELECTRONICS MARKETING SDN BHD shall not be liable for any loss
or damages whatsoever arising from the use of information or any error contained in this manual.
It is recommended that all services and repairs on this product be carried out by AV Electronics Marketing Sdn
Bhd or its authorized service centers/agents.
19
EMIX products must only be used for the purpose they were intended by the manufacturer and in conjunction
with this operating manual.
AV ELECTRONICS MARKETING SDN BHD cannot accept any liability whatsoever for any loss or damages caused
by service, maintenance or repair by unauthorized personnel, or by use other than that intended by the
manufacturer.
20
Professional Public Address System
www.emix.com.my
Loading...