Emitech ETC AL00X User Manual
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
2.4GHz 11b/g PicoStation AP
User Manual & Configuration Guide
Revision : 1.18
Date : 1 April 2009
By
Emitech Corporation
www.emitech.com.tw
Copyright @ 2009 Emitech Corp.
Page 1 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
Table of Content
Table of Content 2
1 Document History 4
2 Overview 5
3 SRGW W eb-based Interface 6
4 Status 10
4.1 Status > Main 10
4.2 Status > Client List 12
4.3 Status > Access Point 13
4.4 Status > System Log 15
5 Wireless 16
5.1 Wireless > Wireless Setting 16
5.2 Wireless > WDS 23
5.3 Wireless > MAC Filtering 26
6 Network 27
6.1 Network > Bridge 27
6.2 Network > Router 29
7 Advance 31
7.1 Advance > Wireless Setting 31
7.2 Advance > Bandwidth 33
7.3 Advance > QoS 35
8 Management 36
8.1 Management > Web 36
8.2 Management > SNMP 37
8.3 Management > Management VLAN 40
8.4 Management > Firmware Upgrade 41
8.5 Management > Backup and Restore 42
8.6 Management > Time 43
8.7 Management > Log 44
8.8 Management > NMS Address 45
9 Tools 46
9.1 Tools > Ping 46
9.2 Tools > Ifconfig 47
9.3 Tools > Route 48
9.4 Tools > TFTP 49
10 Technical Support 50
11 Warning 51
Copyright @ 2009 Emitech Corp.
Page 2 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
Copyright @ 2009 Emitech Corp.
Page 3 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
1 Document History
Revision Date Remarks Authors
1.18 1 April 2009
Release for initial draft – α release
L.H.S
Copyright @ 2009 Emitech Corp.
Page 4 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
2 Overview
The purpose of this document is to describe the detail features of 2.4GHz 11B/G
PicoStation AP, and also the procedure and methodology of configuring and the use of
2.4GHz 11B/G PicoStation AP.
Copyright @ 2009 Emitech Corp.
Page 5 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
3 SRGW W eb-based Interface
Web-based configuration interface is accessible with computer with TCP/IP capability
and web browser (e.g. Mozilla or IE).To access web-based configuration interface,
enter
http://<Device IP>/.
In the browser URL/Location field.
You will see an authentication page display as shown in Figure 3.1.1.
Figure 3.1.1: Windows authentication page
Type “admin” in User Name and Password field, then click OK button.
Copyright @ 2009 Emitech Corp.
Page 6 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
*Obtain default IP address for Dorado SRGW for different Interfaces:
Interface Default IP Notes
WAN DHCP Administrator needs to check
their DHCP server lease to
obtain device IP address
VLAN/LAN/AP 192.168.0.1 Connect a DHCP client
computer/laptop to Dorado
SRGW AP’s wireless interface.
Copyright @ 2009 Emitech Corp.
Page 7 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
Main Website page has six main menus: Status, Wireless, Network, Advance,
Management and Tools. Each main menu also will have its submenu. Home and Reset
button on top right side to show Website home page and reboot the system,
respectively.
Status
Main System status
Client List Wireless client info (****)
Access Point Access point list (*)
System Log System logging
Wireless
Wireless Setting Wireless settings
WDS WDS settings (**)
MAC Filtering Filter MAC address (**)
Network
Bridge VLAN settings
Router WLAN network settings (***)
Advance
Wireless Setting Advance wireless settings
Bandwidth Bandwidth control settings (*****)
Qos 802.11e QoS (WMM) Settings
Management
Web HTTP and Logo settings
Copyright @ 2009 Emitech Corp.
Page 8 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
SNMP SNMP settings
Management VLAN Management VLAN settings
Firmware Upgrade Firmware upgrade settings
Backup/Restore Backup and restore
Time Local time settings
Log Log notification
Tools
Ping Ping
Ifconfig Ifconfig
Route Route
TFTP TFTP
(*) – Only show on Repeater, Client Bridge and Client Router mode
(**) – Only show on Access Point and Access Point Router mode
(***) – Only show on Access Point Router and Client Router mode
(****) – Only show on Access Point, Access Point Router and Repeater mode
(*****) – Only show on Access Point Router mode
Copyright @ 2009 Emitech Corp.
Page 9 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
4 Status
4.1 Status > Main
Status page will display current system status of 2.4GHz 11B/G PicoStation AP.
Figure 4.1.1 illustrates the system status page.
Figure 4.1.1: System Information Configuration page
System Information Configuration page contains the following parameters:
System Information
• Device Name – Name of the device.
• Ethernet MAC – Ethernet MAC address.
• WLAN MAC – WLAN MAC address.
• System Uptime – System uptime in format: day, hours, minute. For example,
“Uptime 0 days, 0 hrs, 40 minutes”.
• System A vailable Memory – Current available memory for device system.
• System Temperature – Current temperature for device.
Copyright @ 2009 Emitech Corp.
Page 10 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
• Firmware Version – Device firmware version.
• Management VLAN ID – Display Management VLAN ID.
Current IP Setting
• IP Address – Device IP address.
• Subent Mask – Device netmask.
• Default Gateway – Device default gateway address.
• DHCP Client – Status of device DHCP client. Enable or disable.
• DHCP Server – Status of device DHCP server. Enable or disable.
Current Wireless Setting
• Operation Mode – Device operation mode. Access Point, Access Point
Router, Repeater, Client Bridge or Client Router.
• SSID – Wireless SSID.
• Wireless Mode – Wireless 802.11 mode.
• Frequency – W ireless frequency.
• Channel – Wireless channel.
• Signal Strength –Wireless signal strength.
• TxRate/RxRate – Wireless transmit/receive rate.
• Security – Wireless security.
Copyright @ 2009 Emitech Corp.
Page 11 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
4.2 Status > Client List
Client list page will display the wireless client’s details that are associated to access
point. Figure 4.2.1 illustrates the client list page.
Figure 4.2.1: W ireless Client List page
Wireless client list page contains the following parameters:
• MAC Address – Wireless client MAC address.
• IP Address – Wireless client IP address.
• Mode – Wireless client wireless mode.
• Rate – Wireless client bit-rate.
• Signal – Wireless signal in percentage.
Copyright @ 2009 Emitech Corp.
Page 12 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
4.3 Status > Access Point
Access point page will display all available access point that scan by 2.4GHz 11B/G
PicoStation AP. Figure 4.3.1 illustrates the access point page.
Figure 4.3.1: Access Point page
Access point page contains the following parameters:
Associated
• ESSID – Access point SSID that AP associated.
• Mac – Access point MAC address that AP associated.
• Type – Access point operating mode that AP associated. Infrastructure or
Ad-Hoc.
• Channel – Access point channel/frequency that AP associated.
• Rate – Access point data rate that AP associated.
• Signal – Access point signal that AP associated.
• Security – Access point wireless security that AP associated.
Available
• ESSID – Available access point SSID.
• Mac – Available access point MAC address.
Copyright @ 2009 Emitech Corp.
Page 13 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
• Type – Available access point operating mode. Infrastructure or Ad-Hoc.
• Channel – Available access point channel/frequency.
• Rate – Available access point data rate.
• Signal – Available access point signal.
• Security – Access point wireless security.
Click on “Select” button to configure SOC wireless settings as shown in Figure 5.1.3.
Click on “Refresh” button to reload/refresh access point list.
Copyright @ 2009 Emitech Corp.
Page 14 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
4.4 Status > System Log
System log page will display all system log message. Figure 4.4.1 illustrates the
system log page.
Figure 4.4.1: System Log page
System log page contains the following parameters:
• Type – Type of system log message.
• Time – Time of system log message generate.
• Message – Description of system log message.
Click on “Show Log Type” drop down menu to filter different type of log message –
“alert”, “critical”, “debug”, “emergency”, “error”, “info”, “notice”, “warning”,
or “all”.
Copyright @ 2009 Emitech Corp.
Page 15 of 51
2.4GHz 11b/g PicoStation AP User Manual & Configuration Guide
5 Wireless
5.1 Wireless > Wireless Setting
Figure 5.1.1 illustrates the AP configuration page for 2.4GHz 11B/G PicoStation AP.
Configure “Operation Mode” to change different type of operating mode. Configure
“Wireless Setting” to change SSID profile setting and general wireless setting.
Figure 5.1.1: AP configuration page
Wireless AP contains the following parameters:
• Device Name – Enter device name for 2.4GHz 11B/G PicoStation AP.
• Operating Mode – Click on “Operating Mode” drop down menu to select
different type of operating mode – “Access Point”, “Access Point Router”,
“Repeater”, “Client Bridge” or “Client Router”.
• “Save” button (on top save button) to save any changes made on operating
mode. A confirmation page will display as shown in Figure 5.1.2.
Figure 5.1.2: A Confirmation Page of Operating Mode
Copyright @ 2009 Emitech Corp.
Page 16 of 51
Loading...