Eminence PSD:2002-8, PSD:2002-16 Specification
SPL vs Freq
SPL vs Freq
screw-on screw-on
PSD:2002-8
BOLT-on BOLT-on
Specification Specification
Throat Size
Nominal Impedance*
Minimum Impedance
Power Rating*
Resonance
DC Resistance (Re)
Usable Frequency Range
Recommended Crossover
Sensitivity*
Magnet Material
Magnet Weight
Voice Coil Diameter
Voice Coil Former
Diaphragm Material
1.0", 25.4 mm
7.6 ohm @ 3.7 kHz
80 W (AES)
540 Hz
6.10 Ω
1.2 kHz - 20 kHz
1.2 kHz / 12 dB
106.1 dB
Ferrite
34 oz, 0.96 kg
2.0", 51 mm
Polyimide
Titanium
MoUntinG infoRMation MoUntinG infoRMation
Overall Diameter
Driver Volume Displaced
Depth
Net Weight
Shipping Weight
Mounting Thread
Mounting Holes Diameter
Mounting Holes B.C.D.
fReQUencY ReSponSe & iMpedance cURve
dBSPL
115
110
105
100
95
90
85
80
75
70
65
200 Hz 500 1K 2K 5K 10K20K
5.25", 133.4 mm
0.018 cu.ft., 0.50 liters
2.20”, 55.9 mm
4.70 lb, 2.1 kg
5.00 lb, 2.3 kg
2X 1/4-20 or 3x M6
3.00”, 76.2 mm
*
Ohm
PSD:2002-16
Throat Size
8 Ω
Nominal Impedance*
Minimum Impedance
Power Rating*
Resonance
DC Resistance (Re)
Usable Frequency Range
Recommended Crossover
Sensitivity*
Magnet Material
Magnet Weight
Voice Coil Diameter
Voice Coil Former
Diaphragm Material
Overall Diameter
Driver Volume Displaced
Depth
Net Weight
Shipping Weight
Mounting Thread
Mounting Holes Diameter
Mounting Holes B.C.D.
fReQUencY ReSponSe & iMpedance cURve
dBSPL
115
20
110
105
100
95
90
10
85
9
80
8
75
7
70
65
6
200 Hz 500 1K 2K 5K 10K20K
1.0", 25.4 mm
16 Ω
14.8 ohm @ 3.3 kHz
80 W (EIA-426A)
580 Hz
11.90 Ω
1.2 kHz - 20 kHz
1.2 kHz / 12 dB
105.8 dB
Ferrite
34 oz, 0.96 kg
2.0", 51 mm
Polyimide
Titanium
5.25", 133.4 mm
0.018 cu.ft., 0.50 liters
2.20”, 55.9 mm
4.70 lb, 2.1 kg
5.00 lb, 2.3 kg
2X 1/4-20 or 3x M6
3.00”, 76.2 mm
*
Ohm
50
40
30
20
10
From design and manufacturing to the stage or studio. Once you’ve
experienced the performance of Eminence, you’ll never accept
anything else.
mission statement
*footnotes
Eminence is dedicated to providing the best Quality, Value and Service
to meet our customers’ needs.
impedance
Please consult www.eminence.com for specifications of models with alternative
impedances.
power rating
Multiple units exceed published ratings evaluated under EIA 426A specification while
tested in a free-air, non-temperature-controlled environment. Multiple compression
drivers exceeded published ratings evaluated under EIA-426A or AES specification
while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-
controlled environment.
SenSitivity
The average output across the usable frequency range when applying 1W/1m into
the nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are
measured under the following conditions: All speakers are tested at 1W/1m using
a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied
microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is
built into the wall with the speaker mounted flush against a steel ring for minimum
diffraction | Yamaha P3500S amplifier | 2700 cu. ft. chamber with fiberglass on all six
surfaces (three with custom-made wedges). Compression drivers were tested using
a 2ft x 2ft baffle built into the wall with horn front mounted.
coaxialS
BETA 8CX, 10CX, and 12CX are coaxial speakers with tweeter sold separately.
Published usable frequency response contingent upon use of ASD:1001 HF Driver.
eminence speaker llc
838 Mulberry Pike, Eminence, KY 40019
Prices, product cosmetics and specifications are subject to change without notice.
Follow us:
Loading...