Eminence OMEGA PRO-18A User Manual

Specication
Nominal Basket Diameter Nominal Impedance*
Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight
Gap Height Voice Coil Diameter
Thiele & Small Parameters
Resonant Frequency (fs)
DC Resistance (Re)
Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas)
Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL) Diaphragm Mass inc. Airload (Mms) Efciency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax)
Surface Area of Cone (Sd)
Maximum Mechanical Limit (Xlim)
18", 457.2mm
4 or 8 ohms
800W
1600W
25Hz
40Hz-800Hz
109 oz
0.375", 9.53mm
4", 101.6mm
25Hz
5.20
1.67mH
8.18
0.32
0.31
548.7 ltr/19.4 cu. ft.
556cc
0.29mm/N
18.8 T-M
138 grams
4.8mm
1159.0cm
16.0mm
The Art and Science of Sound
97
OMEGA PRO-18A Professional Series
Recommended for professional audio as a woofer in vented enclosures. Also ideal for horn loading and scoops.
79
2
Mounting Information
Recommended Enclosure Volume Sealed Vented
Overall Diameter Bafe Hole Diameter
Front Sealing Gasket Rear Sealing Gasket
Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight
Shipping Weight
Materials of Construction
Coil Construction Coil Magnet Composition
Core Details Basket Materials
Cone Composition Cone Edge Composition
Dust Cap Composition
Solid Composition Paper
N/A
96-198 ltr/3.4-7 cu. ft.
18", 457.2mm
16.56", 420.5mm Fitted as Standard Fitted as Standard
0.28", 7.1mm
17.25", 438.2mm
8.15", 207mm
25.2 lbs, 11.4 kg
28.9 lbs, 13.1 kg
Copper
Polyimide
Ferrite
Vented And Extended
Die-Cast Aluminum
Paper
Cloth
Please inquire about alternative impedances.
*
Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.
**
The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/8 ohms, 4 V/16 ohms.
***
Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
calibrated) mounted 1m from wall/bafe | 2 ft. X 2 ft. bafe is built into the wall with the speaker mounted ush against a steel ring for minimum diffraction | Haer P1500 Trans-Nova amplier | 2700 cu.ft. chamber with
Loading...