Eminence OMEGA PRO-15A User Manual

Specication
Nominal Basket Diameter Nominal Impedance*
Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight
Gap Height Voice Coil Diameter
Thiele & Small Parameters
Resonant Frequency (fs)
DC Resistance (Re)
Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas)
Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL) Diaphragm Mass inc. Airload (Mms) Efciency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax)
Surface Area of Cone (Sd)
Maximum Mechanical Limit (Xlim)
15", 381mm
8 ohms
800W
1600W
33Hz
51Hz-1.7kHz
97.3
109 oz
0.375", 9.53mm
4", 101.6mm
33Hz
5.28
1.04mH
5.69
0.33
0.32
258.5 ltr/9.1 cu. ft. 411cc
0.25mm/N
17.5 T-M
94 grams
4.8mm
856.3cm
12.2mm
The Art and Science of Sound
OMEGA PRO-15A Professional Series
Recommended for professional audio as a woofer in vented enclosures. Also good for horn loading and scoops.
99
2
Mounting Information
Recommended Enclosure Volume Sealed Vented
Overall Diameter Bafe Hole Diameter
Front Sealing Gasket Rear Sealing Gasket
Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight
Shipping Weight
Materials of Construction
Coil Construction Coil Magnet Composition
Core Details Basket Materials
Cone Composition Cone Edge Composition
Dust Cap Composition
Solid Composition Paper
N/A
57-108 ltr/2-3.8 cu. ft.
15.21", 386.4mm
14.0", 355.6mm Fitted as Standard Fitted as Standard
0.28", 7.1mm
14.56", 369.9mm
6.35", 161mm
22.7 lbs, 10.3 kg
25.2 lbs, 11.4 kg
Copper
Polyimide
Ferrite
Vented And Extended
Die-Cast Aluminum
Paper
Cloth
Please inquire about alternative impedances.
*
Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.
**
The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/8 ohms, 4 V/16 ohms.
***
Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
calibrated) mounted 1m from wall/bafe | 2 ft. X 2 ft. bafe is built into the wall with the speaker mounted ush against a steel ring for minimum diffraction | Haer P1500 Trans-Nova amplier | 2700 cu.ft. chamber with
Loading...